Metodo di pagamento
![hsbc](/img/service-policies-hsbc.png)
![paypal](/img/service-policies-paypal.png)
![wu](/img/service-policies-wu.png)
![mg](/img/service-policies-mg.png)
Digital Crosspoint Single 2x2 0.8Gbps 2:1 Mux/1:2 Demux Switch 16-Pin TSSOP T/R
TSSOP6Produttore:
ProduttorePart #:
MAX9152EUE-T
Scheda dati:
Series:
MAX9152
Product:
Analog Crosspoint Switches
Configuration:
2 X 2
Data Rate:
800 Mb/s
EDA/CAD Modelli:
All bill of materials (BOM) can be sent via email to
[email protected],
or fill below form to Quote for MAX9152EUE-T, guaranteed quotes back within
12hr.
Compila il breve modulo sottostante e ti forniremo immediatamente il preventivo.
he MAX9152 2 x 2 crosspoint switch is designed for applications requiring high speed, low power, and low-noise signal distribution. This device includes two LVDS/LVPECL inputs, two LVDS outputs, and two logic inputs that set the internal connections between differential inputs and outputs.The MAX9152 can be programmed to connect any input to either or both outputs, allowing it to be used in the following configurations: 2 5 2 crosspoint switch, 2:1 mux, 1:2 demux, 1:2 splitter, or dual repeater. This flexibility makes the MAX9152 ideal for protection switching in fault-tolerant systems, loopback switching for diagnostics, fanout buffering for clock/data distribution, and signal regeneration for communication over extended distances. Ultra-low 120psPK-PK (max) PRBS jitter ensures reliable communications in high-speed links that are highly sensitive to timing error, especially those incorporating clock-and-data recovery, or serializers and deserializers. The high-speed switching performance guarantees an 800Mbps data rate and less than 50ps (max) skew between channels. LVDS inputs and outputs are compatible with the TIA/EIA-644 LVDS standard. The LVDS inputs are designed to also accept LVPECL signals directly, and PECL signals with an attenuation network. The LVDS outputs are designed to drive 75Ω or 100Ω loads, and feature a selectable differential output resistance to minimize reflections. The MAX9152 is available in 16-pin TSSOP and SO packages, and consumes only 109mW while operating from a single +3.3V supply over the -40°C to +85°C temperature range.
Product Category: | Analog & Digital Crosspoint ICs | Series: | MAX9152 |
Product: | Analog Crosspoint Switches | Configuration: | 2 X 2 |
Data Rate: | 800 Mb/s | Input Type: | LVDS, LVPECL |
Output Type: | LVDS | Operating Supply Voltage: | 3.3 V |
Minimum Operating Temperature: | - 40 C | Maximum Operating Temperature: | + 85 C |
Mounting Style: | SMD/SMT | Packaging: | MouseReel |
Height: | 1.5 mm | Length: | 10 mm |
Product Type: | Analog & Digital Crosspoint ICs | Factory Pack Quantity: | 2500 |
Subcategory: | Communication & Networking ICs | Supply Type: | Single |
Supply Voltage - Max: | 3.6 V | Supply Voltage - Min: | 3 V |
Width: | 4 mm | Part # Aliases: | MAX9152 |
Unit Weight: | 0.006102 oz |
Relativi al servizio post-vendita e alla liquidazione
Metodo di pagamento
Per canali di pagamento alternativi, contattaci a:
[email protected]metodo di spedizione
AVAQ determina e confeziona tutti i dispositivi in base ai requisiti di protezione contro le scariche elettrostatiche (ESD) e il livello di sensibilità all'umidità (MSL)..
Prodotto 365 giorni
Qualità garantita
Promettiamo di fornire un servizio di garanzia della qualità di 365 giorni per tutti i nostri prodotti.
Qtà. | Prezzo unitario | Est. Prezzo |
---|---|---|
1+ | - | - |
I prezzi sottostanti sono solo di riferimento.