Metodo di pagamento
MAX5865ETM
Codec General Purpose 1-CH 10bit 3V 48-Pin TQFN EP
-
Produttore:
-
ProduttorePart #:
MAX5865ETM
-
Scheda dati:
-
Number of Bits:
10
-
Number of Channels:
4
-
Power (Watts):
2.1 W
-
Voltage - Supply, Analog:
2.7V ~ 3.3V
-
EDA/CAD Modelli:
Disponibilità: 3389 PZ
Compila il breve modulo sottostante e ti forniremo immediatamente il preventivo.
MAX5865ETM Descrizione generale
The MAX5865 ultra-low-power, highly integrated analog front end is ideal for portable communication equipment such as handsets, PDAs, WLAN, and 3G wireless terminals. The MAX5865 integrates dual 8-bit receive ADCs and dual 10-bit transmit DACs while providing the highest dynamic performance at ultra-low power. The ADCs' analog I-Q input amplifiers are fully differential and accept 1VP-P full-scale signals. Typical I-Q channel phase matching is ±0.2° and amplitude matching is ±0.05dB. The ADCs feature 48.4dB SINAD and 70dBc spurious-free dynamic range (SFDR) at fIN = 5.5MHz and fCLK = 40MHz. The DACs' analog I-Q outputs are fully differential with ±400mV full-scale output, and 1.4V common-mode level. Typical I-Q channel phase matching is ±0.15° and gain matching is ±0.05dB. The DACs also feature dual 10-bit resolution with 72dBc SFDR, and 57dB SNR at fOUT = 2.2MHz and fCLK = 40MHz. The ADCs and DACs operate simultaneously or independently for frequency-division duplex (FDD) and time-division duplex (TDD) modes. A 3-wire serial interface controls power-down and transceiver modes of operation. The typical operating power is 75.6mW at fCLK = 40Msps with the ADCs and DACs operating simultaneously in transceiver mode. The MAX5865 features an internal 1.024V voltage reference that is stable over the entire operating power-supply range and temperature range. The MAX5865 operates on a +2.7V to +3.3V analog power supply and a +1.8V to +3.3V digital I/O power supply for logic compatibility. The quiescent current is 8.5mA in idle mode and 1μA in shutdown mode. The MAX5865 is specified for the extended (-40°C to +85°C) temperature range and is available in a 48-pin thin QFN package.See a parametric table of the complete family of pin-compatible AFEs.
Caratteristiche principali
- CLK
- CLK
- IN
- OUT
- IN
- MAX5865EVKIT
Applicazione
- 3G Wireless Terminals
- Fixed/Mobile Broadband Wireless Modems
- Narrowband/Wideband CDMA Handsets
- PDAs
Specifiche
Category | Integrated Circuits (ICs)Data AcquisitionAnalog Front End (AFE) | Series | - |
Number of Bits | 10 | Number of Channels | 4 |
Power (Watts) | 2.1 W | Voltage - Supply, Analog | 2.7V ~ 3.3V |
Voltage - Supply, Digital | 2.7V ~ 3.3V | Mounting Type | Surface Mount |
Base Product Number | MAX5865 |
Politiche di servizio e altro
Relativi al servizio post-vendita e alla liquidazione
Per canali di pagamento alternativi, contattaci a:
[email protected]metodo di spedizione
AVAQ determina e confeziona tutti i dispositivi in base ai requisiti di protezione contro le scariche elettrostatiche (ESD) e il livello di sensibilità all'umidità (MSL)..
Prodotto 365 giorni
Qualità garantita
Promettiamo di fornire un servizio di garanzia della qualità di 365 giorni per tutti i nostri prodotti.
Disponibilità: 3389 PCS
+BOMQtà. | Prezzo unitario | Est. Prezzo |
---|---|---|
1+ | - | - |
I prezzi sottostanti sono solo di riferimento.
Tutte le distinte materiali (BOM) possono essere inviate via e-mail a [email protected], oppure compila il modulo sottostante per effettuare un preventivo per MAX5865ETM, preventivi garantiti entro 12 ore.
Top Sellers
-
ADIN1200BCP32Z
ADI
980+ $0,767
-
AD9363BBCZ
ADI
IC RF TxRx Only Cellular GSM 325MHz ~ 3.8GHz 144-LFBGA, CSPBGA
-
ADN4604ASVZ
Analog Devices, Inc
X-STREAM™ 4.25 Gbps, 16 × 16, Digital Crosspoint Switch
-
AD75019JPZ
Analog Devices
Versatile 16 x 16 Analog General Purpose PLCC Tube
-
AD6529BABC
ADI
IC, DBB Based on MSP430 for GSM 2.5G