Metodo di pagamento
![hsbc](/img/service-policies-hsbc.png)
![paypal](/img/service-policies-paypal.png)
![wu](/img/service-policies-wu.png)
![mg](/img/service-policies-mg.png)
Data Selectors/Multiplexers With 3-State Outputs
CDIP(J)Produttore:
ProduttorePart #:
M38510/30905BEA
Scheda dati:
Technology Family:
LS
Function:
Digital Multiplexer
Configuration:
8:1
Number Of Channels:
1
EDA/CAD Modelli:
Invia tutte le distinte materiali a
[email protected],
oppure compila il modulo sottostante per un preventivo su M38510/30905BEA. Risposta garantita entro
12hr.
Compila il breve modulo sottostante e ti forniremo immediatamente il preventivo.
These monolithic data selectors/multiplexers contain full on-chip binary decoding to select one-of-eight data sources and feature a strobe-controlled three-state output. The strobe must be at a low logic level to enable these devices. The three-state outputs permit a number of outputs to be connected to a common bus. When the strobe input is high, both outputs are in a high-impedance state in which both the upper and lower transistors of each totem-pole output are off, and the output neither drives nor loads the bus significantly. When the strobe is low, the outputs are activated and operate as standard TTL totem-pole outputs.
To minimize the possibility that two outputs will attempt to take a common bus to opposite logic levels, the output control circuitry is designed so that the average output disable time is shorter than the average output enable time. The SN54251 and SN74251 have output clamp diodes to attenuate reflections on the bus line.
Technology family | LS | Function | Digital Multiplexer |
Configuration | 8:1 | Number of channels | 1 |
Operating temperature range (°C) | -55 to 125 | Rating | Military |
feature-logic-family | LS | feature-logic-function | Multiplexer |
feature-configuration | 1 x 8:1 | feature-number-of-elements-per-chip | 1 |
feature-number-of-inputs-per-chip | 8 | feature-number-of-outputs-per-chip | 1 |
feature-polarity | Inverting/Non-Inverting | feature-process-technology | Bipolar |
feature-output-type | 3-State | feature-maximum-low-level-output-current-ma | 4 |
feature-maximum-high-level-output-current-ma | -1 | feature-minimum-operating-supply-voltage-v | 4.5 |
feature-maximum-operating-supply-voltage-v | 5.5 | feature-tolerant-i-os-v | |
feature-maximum-power-dissipation-mw | 35(Typ) | feature-packaging | Tube |
feature-rad-hard | No | feature-pin-count | 16 |
feature-cecc-qualified | No | feature-esd-protection | |
feature-escc-qualified | feature-military | ||
feature-aec-qualified | No | feature-aec-qualified-number | |
feature-eccn-code | EAR99 | feature-svhc | Yes |
feature-svhc-exceeds-threshold | No |
Relativi al servizio post-vendita e alla liquidazione
Metodo di pagamento
Per canali di pagamento alternativi, contattaci a:
[email protected]metodo di spedizione
AVAQ determina e confeziona tutti i dispositivi in base ai requisiti di protezione contro le scariche elettrostatiche (ESD) e il livello di sensibilità all'umidità (MSL)..
Prodotto 365 giorni
Qualità garantita
Promettiamo di fornire un servizio di garanzia della qualità di 365 giorni per tutti i nostri prodotti.
Qtà. | Prezzo unitario | Est. Prezzo |
---|---|---|
1+ | - | - |
I prezzi sottostanti sono solo di riferimento.