Questo sito web utilizza i cookie. Utilizzando questo sito, acconsenti all'utilizzo dei cookie. Per ulteriori informazioni, dai un'occhiata al nostro politica sulla riservatezza.

Le immagini servono solo come riferimento,

Vedi Specifiche Tecniche

TCA9548APWR +BOM

8-channel 1.65- to 5.5-V I2C/SMBus switch with reset & voltage translation

Produttore:

TI
ProduttorePart #:

TCA9548APWR
Scheda dati:

TCA9548APWR Scheda dati (PDF)
Addresses:

8
Supply Voltage (max) (V):

5.5
Supply Voltage (min) (V):

1.65
Features:

Reset pin
EDA/CAD Modelli:

Richiedi modelli CAD gratuiti per TCA9548APWR

E-mail: [email protected]

Skype: live:.cid.ab6b29428937b76

tel: +852 95804164

TCA9548APWR Descrizione generale

The TCA9548A device has eight bidirectional translating switches that can be controlled through the I²C bus. The SCL/SDA upstream pair fans out to eight downstream pairs, or channels. Any individual SCn/SDn channel or combination of channels can be selected, determined by the contents of the programmable control register. These downstream channels can be used to resolve I²C slave address conflicts. For example, if eight identical digital temperature sensors are needed in the application, one sensor can be connected at each channel: 0-7.

The system master can reset the TCA9548A in the event of a time-out or other improper operation by asserting a low in the RESET input. Similarly, the power-on reset deselects all channels and initializes the I²C/SMBus state machine. Asserting RESET causes the same reset and initialization to occur without powering down the part. This allows recovery should one of the downstream I²C buses get stuck in a low state.

The pass gates of the switches are constructed so that the VCC pin can be used to limit the maximum high voltage, which is passed by the TCA9548A. Limiting the maximum high voltage allows the use of different bus voltages on each pair, so that 1.8-V, 2.5-V or 3.3-V parts can communicate with 5-V parts, without any additional protection. External pullup resistors pull the bus up to the desired voltage level for each channel. All I/O pins are 5-V tolerant.

Caratteristiche principali

1-to-8 Bidirectional translating switches
I²C Bus and SMBus compatible
Active-low reset input
Three address pins, allowing up to eight TCA9548A devices on the I²C bus
Channel selection through an I²C Bus, in any combination
Power up with all switch channels deselected
Low R_ON switches
Allows voltage-level translation between 1.8-V, 2.5-V, 3.3-V, and 5-V buses
No glitch on power up
Supports hot insertion
Low standby current
Operating power-supply voltage range of1.65 V to 5.5 V
5-V Tolerant inputs
0- to 400-kHz Clock frequency
Latch-up performance exceeds 100 mA Per JESD 78, class II
ESD Protection exceeds JESD 22
- ±2000-V Human-body model (A114-A)
- 200-V Machine model (A115-A)
- ±1000-V Charged-device model (C101)

Applicazione

Communications & Networking

Specifiche

Addresses	8	Supply voltage (max) (V)	5.5
Supply voltage (min) (V)	1.65	Features	Reset pin
Rating	Catalog	Frequency (max) (MHz)	0.4
Operating temperature range (°C)	-40 to 85	Number of channels	8
Product Category	Switch ICs - Various	Product	Bidirectional Translating Switches
Number of Switches	8 Switch	Configuration	-
On Resistance - Max	70 Ohms	Operating Supply Voltage	1.65 V to 5.5 V
Minimum Operating Temperature	- 40 C	Maximum Operating Temperature	+ 85 C
Mounting Style	SMD/SMT	Product Type	Switch ICs - Various
Series	TCA9548A	Factory Pack Quantity	2000
Subcategory	Switch ICs	Supply Current - Max	80 uA
Supply Voltage - Max	5.5 V	Supply Voltage - Min	1.65 V
Unit Weight	0.007408 oz

Politiche di servizio e altro

Relativi al servizio post-vendita e alla liquidazione

Pagamento

Metodo di pagamento

TT/bonifico bancario

PayPal

Western Union

Grammo dei soldi

Per canali di pagamento alternativi, contattaci a:

[email protected]

Spedizione e imballaggio

metodo di spedizione

Fedex

UPS

DHL

NTN

Imballaggio

AVAQ determina e confeziona tutti i dispositivi in base ai requisiti di protezione contro le scariche elettrostatiche (ESD) e il livello di sensibilità all'umidità (MSL)..