Questo sito web utilizza i cookie. Utilizzando questo sito, acconsenti all'utilizzo dei cookie. Per ulteriori informazioni, dai un'occhiata al nostro politica sulla riservatezza.

Le immagini servono solo come riferimento,

Vedi Specifiche Tecniche

TMAG5111C2AQDBVRQ1 +BOM

Digital Switch Latch Open Drain Hall Effect SOT-23-5

Produttore:

Texas Instruments
ProduttorePart #:

TMAG5111C2AQDBVRQ1
Scheda dati:

TMAG5111C2AQDBVRQ1 Scheda dati (PDF)
Operating Supply Current:

6 mA
Maximum Output Current:

110 mA
Operating Point Min/Max:

0.2 mT to 2.6 mT
Release Point Min/Max (Brp):

- 2.6 mT to - 0.2 mT
EDA/CAD Modelli:

Richiedi modelli CAD gratuiti per TMAG5111C2AQDBVRQ1

TMAG5111C2AQDBVRQ1 Descrizione generale

The TMAG5110-Q1 and TMAG5111-Q1 are 2-dimensional, dual Hall-effect latches operating from a 2.5 V to 38 V power supply. Designed for high-speed and high-temperature motor applications, these devices are optimized for applications leveraging rotating magnets. Integrating two sensors and two separate signal chains the TMAG511x-Q1 offers two independent digital outputs giving speed and direction calculation (TMAG5111 -Q1) or giving directly the digital output of each independent latches (TMAG5110 -Q1). This high level of integration allow the use of a single TMAG511x-Q1 device instead of two separate latches.

The device is offered in a standard 3 mT operating point, as well as a high-sensitivity 1.4 mT operating point. The higher magnetic sensitivity provides flexibility in low-cost magnet selection and mechanical component placement. The TMAG511x-Q1 is also available in three 2-axis combination options (X-Y, Z-X, Z-Y) to allow flexible placement of the sensor relative to the magnet.

The device performs consistently across a wide ambient temperature range of –40 °C to +125 °C.

Caratteristiche principali

AEC-Q100 qualified with the following results:
- Device temperature grade 1: –40 °C to 125 °C ambient operating temperature range
- Device HBM ESD classification Level H3A
- Device CDM ESD classification Level C6
2D sensing with planar and vertical hall sensors
Inherent quadrature independent of magnet alignment or magnet pole pitch
Two functional options available:
- TMAG5110 -Q1: independent 2D outputs
- TMAG5111 -Q1: speed and direction outputs
Ultra-high magnetic sensitivity:
- TMAG511xx2 -Q1: ±1.4 mT (typical)
- TMAG511xx4 -Q1: ±3 mT (typical)
Fast 40-kHz sensing bandwidth
2.5-V to 38-V operating V_CC range
Open-drain output (10 mA sink)
Wide ambient operating temperature range:
- –40 °C to +125 °C
Protection features
- Reverse supply protection (up to –20 V)
- Device survives up to 40-V
- Output short-circuit protection
- Output current limitation

Specifiche

Product Category	Board Mount Hall Effect / Magnetic Sensors	Operating Supply Current	6 mA
Maximum Output Current	110 mA	Operating Point Min/Max	0.2 mT to 2.6 mT
Release Point Min/Max (Brp)	- 2.6 mT to - 0.2 mT	Operating Supply Voltage	2.5 V to 38 V
Minimum Operating Temperature	- 40 C	Maximum Operating Temperature	+ 125 C
Mounting Style	SMD/SMT	Series	TMAG5111-Q1
Moisture Sensitive	Yes	Output Type	Open Drain
Output Voltage	0 V to 38 V	Product	Hall Effect Latches
Product Type	Hall Effect / Magnetic Sensors	Factory Pack Quantity	3000
Subcategory	Sensors	Supply Voltage - Max	38 V
Supply Voltage - Min	2.5 V	Termination Style	SMD/SMT

Politiche di servizio e altro

Relativi al servizio post-vendita e alla liquidazione

Pagamento

Metodo di pagamento

TT/bonifico bancario

PayPal

Western Union

Grammo dei soldi

Per canali di pagamento alternativi, contattaci a:

[email protected]

Spedizione e imballaggio

metodo di spedizione

Fedex

UPS

DHL

NTN

Imballaggio

AVAQ determina e confeziona tutti i dispositivi in base ai requisiti di protezione contro le scariche elettrostatiche (ESD) e il livello di sensibilità all'umidità (MSL)..