Metodo di pagamento
TMAG5111B2AQDBVR +BOM
Digital Switch Latch Open Drain Hall Effect SOT-23-5
SOT-23-5-
Produttore:
Texas Instruments
-
ProduttorePart #:
TMAG5111B2AQDBVR
-
Scheda dati:
-
Type:
2D Dual Latch
-
Operating Supply Current:
6 mA
-
Maximum Output Current:
110 mA
-
Operating Point Min/Max:
- 1.4 mT to 1.4 mT
-
EDA/CAD Modelli:
Invia tutte le distinte materiali a [email protected], oppure compila il modulo sottostante per un preventivo su TMAG5111B2AQDBVR. Risposta garantita entro 12hr.
Disponibilità: 5193 PZ
Compila il breve modulo sottostante e ti forniremo immediatamente il preventivo.
TMAG5111B2AQDBVR Descrizione generale
The TMAG5110 and TMAG5111 are 2-dimensional, dual Hall-effect latches operating from a 2.5 V to 38 V power supply. Designed for high-speed and high-temperature motor applications, these devices are optimized for applications leveraging rotating magnets. Integrating two sensors and two separate signal chains the TMAG511x offers two independent digital outputs giving speed and direction calculation (TMAG5111) or giving directly the digital output of each independent latches (TMAG5110). This high level of integration allow the use of a single TMAG511x device instead of two separate latches.
The device is offered in a standard 3 mT operating point, as well as a high-sensitivity 1.4 mT operating point. The higher magnetic sensitivity provides flexibility in low-cost magnet selection and mechanical component placement. The TMAG511x is also available in three 2-axis combination options (X-Y, Z-X, Z-Y) to allow flexible placement of the sensor relative to the magnet.
The device performs consistently across a wide ambient temperature range of –40 °C to +125 °C.
Caratteristiche principali
- 2D sensing with planar and vertical hall sensors
- Inherent quadrature independent of magnet alignment or magnet pole pitch
- Two functional options available:
- TMAG5110: independent 2D outputs
- TMAG5111: speed and direction outputs
- Ultra-high magnetic sensitivity:
- TMAG511xx2: ±1.4 mT (typical)
- TMAG511xx4: ±3 mT (typical)
- Fast 40-kHz sensing bandwidth
- 2.5-V to 38-V operating VCC range
- Open-drain output (10 mA sink)
- Wide ambient operating temperature range:
- –40 °C to +125 °C
- Protection features
- Reverse supply protection (up to –20 V)
- Device survives up to 40-V
- Output short-circuit protection
- Output current limitation
Specifiche
Product Category | Board Mount Hall Effect / Magnetic Sensors | Type | 2D Dual Latch |
Operating Supply Current | 6 mA | Maximum Output Current | 110 mA |
Operating Point Min/Max | - 1.4 mT to 1.4 mT | Release Point Min/Max (Brp) | - 0.2 mT to - 2.6 mT |
Operating Supply Voltage | 2.5 V to 38 V | Minimum Operating Temperature | - 40 C |
Maximum Operating Temperature | + 125 C | Mounting Style | SMD/SMT |
Series | TMAG5111 | Moisture Sensitive | Yes |
Output Type | Open Drain | Output Voltage | 0 V to 38 V |
Product | Hall Effect Latches | Product Type | Hall Effect / Magnetic Sensors |
Factory Pack Quantity | 3000 | Subcategory | Sensors |
Supply Voltage - Max | 38 V | Supply Voltage - Min | 2.5 V |
Termination Style | Solder |
Politiche di servizio e altro
Relativi al servizio post-vendita e alla liquidazione
Per canali di pagamento alternativi, contattaci a:
[email protected]metodo di spedizione
AVAQ determina e confeziona tutti i dispositivi in base ai requisiti di protezione contro le scariche elettrostatiche (ESD) e il livello di sensibilità all'umidità (MSL)..
Prodotto 365 giorni
Qualità garantita
Promettiamo di fornire un servizio di garanzia della qualità di 365 giorni per tutti i nostri prodotti.
In Stock: 5.193
Minimum Order: 1
Qtà. | Prezzo unitario | Est. Prezzo |
---|---|---|
1+ | - | - |
I prezzi sottostanti sono solo di riferimento.