Questo sito web utilizza i cookie. Utilizzando questo sito, acconsenti all'utilizzo dei cookie. Per ulteriori informazioni, dai un'occhiata al nostro politica sulla riservatezza.

Le immagini servono solo come riferimento,

Vedi Specifiche Tecniche

STLC2416 +BOM

SPECIALTY TELECOM CIRCUIT, PBGA120, 10 X 10 MM, 1.40 MM HEIGHT, LFBGA-120

Produttore:

STMICROELECTRONICS
ProduttorePart #:

STLC2416
Scheda dati:

STLC2416 Scheda dati (PDF)
Part Life Cycle Code:

Obsolete
Pin Count:

120
Reach Compliance Code:

compliant
HTS Code:

8542.39.00.01
EDA/CAD Modelli:

Richiedi modelli CAD gratuiti per STLC2416

STLC2416 Descrizione generale

DESCRIPTIONThe STLC2416 from STMicroelectronics is a Bluetooth™ baseband controller with integrated 4 Mbit flash memory. Together with a Bluetooth™ Radio this product offers a compact and complete solution for short-range wireless connectivity. It incorporates all the lower layer functions of the Bluetooth™ protocol.The microcontroller allows the support of all data packets of Bluetooth™ in addition to voice. The embedded controller can be used to run the Bluetooth™ protocol and application layers if required. The software is located in the integrated flash memory.FEATURES■ Pin to pin compatible with the previous version STLC2415■ Ericsson Technology Licensing Baseband Core (EBC)■ Bluetooth™ specification compliance: V1.1 and V1.2■ SW compatible with STLC2411-M28R400CT combination■ 2 layer class 4 PCB compatible■ Point-to-point, point-to-multi-point (up to 7 slaves) and scatternet capability■ Asynchronous Connection Oriented (ACL) logical transport link■ Synchronous Connection Oriented (SCO) links: 2 simultaneous SCO channels■ Supports Pitch-Period Error Concealment (PPEC) – Improves speech quality in the vicinity of interference – Improves coexistence with WLAN – Works at receiver, no Bluetooth implication■ Adaptive Frequency Hopping (AFH): hopping kernel, channel assessment as Master and as Slave■ Faster Connection: Interlaced scan for Page and Inquiry scan, first FHS without random backoff, RSSI used to limit range■ Extended SCO (eSCO) links■ Standard BlueRF bus interface■ QoS Flush■ Clock support – System clock input: any integer value from 12 … 33 MHz – LPO clock input at 3.2 and 32 kHz or via the embedded 32 kHz crystal oscillator cell■ ARM7TDMI 32-bit CPU■ Memory organization – Integrated 4Mbit flash – 64KByte on-chip RAM – 4KByte on-chip boot ROM■ Low power architecture with 2 different low power levels: – Sleep Mode – Deep Sleep Mode■ HW support for packet types – ACL: DM1, 3, 5 and DH1, 3, 5 – SCO: HV1, 3 and DV – eSCO: EV3, 5■ Communication interfaces – Synchronous Serial Interface, supporting up to 32 bit data and different industry standards – Two enhanced 16550 UARTs with 128 byte FIFO depth – 12Mbps USB interface – Fast master I2C bus interface – Multi slot PCM interface – 16 programmable GPIOs – 2 external interrupts and various interrupt possibilities through other interfaces■ Efficient support for WLAN coexistence in collocated scenario■ Ciphering support for up to 128-bit key■ Receiver Signal Strength Indication (RSSI) support for power-controlled links■ Separate control for external power amplifier (PA) for class1 power support.■ Software support – Low level (up to HCI) stack or embedded stack with profiles – Support of UART and USB HCI transport layers.Applications FeaturesTypical applications in which the STLC2416 can be used are:■ Cable replacement■ Portable computers, PDA■ Modems■ Handheld data transfer devices■ Cameras■ Computer peripherals■ Other type of devices that require the wireless communication provided by Bluetooth™

Specifiche

Source Content uid	STLC2416	Part Life Cycle Code	Obsolete
Pin Count	120	Reach Compliance Code	compliant
HTS Code	8542.39.00.01	JESD-30 Code	S-PBGA-B120
JESD-609 Code	e0	Length	10 mm
Number of Functions	1	Number of Terminals	120
Operating Temperature-Max	85 °C	Operating Temperature-Min	-40 °C
Power Supplies	1.8,3.3 V	Qualification Status	Not Qualified
Seated Height-Max	1.4 mm	Supply Voltage-Nom	1.8 V
Surface Mount	YES	Technology	CMOS
Telecom IC Type	TELECOM CIRCUIT	Temperature Grade	INDUSTRIAL
Terminal Finish	TIN LEAD	Terminal Form	BALL
Terminal Pitch	0.5 mm	Terminal Position	BOTTOM
Width	10 mm

Politiche di servizio e altro

Relativi al servizio post-vendita e alla liquidazione

Pagamento

Metodo di pagamento

TT/bonifico bancario

PayPal

Western Union

Grammo dei soldi

Per canali di pagamento alternativi, contattaci a:

[email protected]

Spedizione e imballaggio

metodo di spedizione

Fedex

UPS

DHL

NTN

Imballaggio

AVAQ determina e confeziona tutti i dispositivi in base ai requisiti di protezione contro le scariche elettrostatiche (ESD) e il livello di sensibilità all'umidità (MSL)..