Questo sito web utilizza i cookie. Utilizzando questo sito, acconsenti all'utilizzo dei cookie. Per ulteriori informazioni, dai un'occhiata al nostro politica sulla riservatezza.

Le immagini servono solo come riferimento,

Vedi Specifiche Tecniche

P87LPC767BN +BOM

High-performance integrated circuit for digital applications

Produttore:

Rochester Electronics, LLC
ProduttorePart #:

P87LPC767BN
Scheda dati:

P87LPC767BN Scheda dati (PDF)
Programmabe:

Not Verified
Core Processor:

80C51
Core Size:

8-Bit
Speed:

20MHz
EDA/CAD Modelli:

Richiedi modelli CAD gratuiti per P87LPC767BN

P87LPC767BN Descrizione generale

Featuring integrated peripherals such as timers/counters, UART interfaces, and GPIO pins, the P87LPC767BN offers seamless connectivity with external devices, enhancing its usability in embedded systems. Its low power consumption makes it an energy-efficient choice for consumer electronics, industrial control systems, and automotive electronics, among others. The P87LPC767BN stands out for its reliability and performance, making it a top choice for designers looking to create innovative and efficient solutions

Caratteristiche principali

An accelerated 80C51 CPU provides instruction cycle times of 300600 ns for all instructions except multiply and divide when executing at 20 MHz. Execution at up to 20 MHz when VDD = 4.5 V to 6.0 V, 10 MHz when VDD = 2.7 V to 6.0 V.

Four-channel multiplexed 8-bit A/D converter. Conversion time of 9.3 S at fOSC = 20 MHz.

2.7 V to 6.0 V operating range for digital functions.

4 K bytes EPROM code memory.

128 byte RAM data memory.

32-byte customer code EPROM allows serialization of devices, storage of setup parameters, etc.

Two 16-bit counter/timers. Each timer may be configured to toggle a port output upon timer overflow.

Two analog comparators.

Full duplex UART.

I2C communication port.

Eight keypad interrupt inputs, plus two additional external interrupt inputs.

Four interrupt priority levels.

Watchdog timer with separate on-chip oscillator, requiring no external components. The watchdog timeout time is selectable from 8 values.

Active low reset. On-chip power-on reset allows operation with no external reset components.

Low voltage reset. One of two preset low voltage levels may be selected to allow a graceful system shutdown when power fails. May optionally be configured as an interrupt.

Oscillator Fail Detect. The watchdog timer has a separate fully on-chip oscillator, allowing it to perform an oscillator fail detect function.

Configurable on-chip oscillator with frequency range and RC oscillator options (selected by user programmed EPROM bits). The RC oscillator option allows operation with no external oscillator components.

Programmable port output configuration options: quasi-bidirectional, open drain, push-pull, input-only.

Selectable Schmitt trigger port inputs.

LED drive capability (20 mA) on all port pins.

Controlled slew rate port outputs to reduce EMI. Outputs have approximately 10 ns minimum ramp times.

15 I/O pins minimum. Up to 18 I/O pins using on-chip oscillator and reset options.

Only power and ground connections are required to operate the 87LPC767 when fully on-chip oscillator and reset options are selected.

Serial EPROM programming allows simple in-circuit production coding. Two EPROM security bits prevent reading of sensitive application programs.

Idle and Power Down reduced power modes. Improved wakeup from Power Down mode (a low interrupt input starts execution). Typical Power Down current is 1 A.

20-pin DIP and SO packages.

Specifiche

Programmabe	Not Verified	Core Processor	80C51
Core Size	8-Bit	Speed	20MHz
Connectivity	I²C, UART/USART	Peripherals	Brown-out Detect/Reset, LED, POR, WDT
Number of I/O	18	Program Memory Size	4KB (4K x 8)
Program Memory Type	OTP	EEPROM Size	-
RAM Size	128 x 8	Voltage - Supply (Vcc/Vdd)	2.7V ~ 6V
Data Converters	A/D 4x8b SAR	Oscillator Type	External, Internal
Operating Temperature	0°C ~ 70°C (TA)	Mounting Type	Through Hole
Base Product Number	P87LPC767

Politiche di servizio e altro

Relativi al servizio post-vendita e alla liquidazione

Pagamento

Metodo di pagamento

TT/bonifico bancario

PayPal

Western Union

Grammo dei soldi

Per canali di pagamento alternativi, contattaci a:

[email protected]

Spedizione e imballaggio

metodo di spedizione

Fedex

UPS

DHL

NTN

Imballaggio

AVAQ determina e confeziona tutti i dispositivi in base ai requisiti di protezione contro le scariche elettrostatiche (ESD) e il livello di sensibilità all'umidità (MSL)..