Questo sito web utilizza i cookie. Utilizzando questo sito, acconsenti all'utilizzo dei cookie. Per ulteriori informazioni, dai un'occhiata al nostro politica sulla riservatezza.

Le immagini servono solo come riferimento,

Vedi Specifiche Tecniche

LM50CIM3 +BOM

Temperature Sensor Analog, Local -40°C ~ 125°C 10mV/°C SOT-23-3

Produttore:

NS/TI
ProduttorePart #:

LM50CIM3
Scheda dati:

LM50CIM3 Scheda dati (PDF)
Local Sensor Accuracy (max):

2
Operating Temperature Range (°C):

-40 to 125, -40 to 150
Supply Voltage (min) (V):

4.5
Supply Voltage (max) (V):

10
EDA/CAD Modelli:

Richiedi modelli CAD gratuiti per LM50CIM3

LM50CIM3 Descrizione generale

The LM50 and LM50-Q1 devices are precision integrated-circuit temperature sensors that can sense a –40°C to 125°C temperature range using a single positive supply. The output voltage of the device is linearly proportional to temperature (10 mV/°C) and has a DC offset of 500 mV. The offset allows reading negative temperatures without the need for a negative supply.

The ideal output voltage of the LM50 or LM50-Q1 ranges from 100 mV to 1.75 V for a –40°C to 125°C temperature range. The LM50 and LM50-Q1 do not require any external calibration or trimming to provide accuracies of ±3°C at room temperature and ±4°C over the full –40°C to 125°C temperature range. Trimming and calibration of the LM50 and LM50-Q1 at the wafer level assure low cost and high accuracy. The linear output, 500 mV offset, and factory calibration of the LM50 and LM50-Q1 simplify the circuitry requirements in a single supply environment where reading negative temperatures is necessary. Because the quiescent current of the LM50 and LM50-Q1 is less than 130 µA, self-heating is limited to a very low 0.2°C in still air.

Caratteristiche principali

LM50-Q1 is AEC-Q100 Grade 1 Qualified and is Manufactured on an Automotive Grade Flow
Calibrated Directly in Degrees Celsius (Centigrade)
Linear + 10 mV/°C Scale Factor
±2°C Accuracy Specified at 25°C
Specified for Full –40° to 125°C range
Suitable for Remote Applications
Low Cost Due to Wafer-Level Trimming
Operates from 4.5 V to 10 V
Less than 130-µA Current Drain
Low Self-Heating: Less than 0.2°C in Still A
Nonlinearity Less than 0.8°C Over Temp
UL Recognized Component

Specifiche

Local sensor accuracy (max)	2	Operating temperature range (°C)	-40 to 125, -40 to 150
Supply voltage (min) (V)	4.5	Supply voltage (max) (V)	10
Supply current (max) (µA)	130	Interface type	Analog output
Sensor gain (mV/°C)	10	Rating	Catalog
Features	UL recognized

Politiche di servizio e altro

Relativi al servizio post-vendita e alla liquidazione

Pagamento

Metodo di pagamento

TT/bonifico bancario

PayPal

Western Union

Grammo dei soldi

Per canali di pagamento alternativi, contattaci a:

[email protected]

Spedizione e imballaggio

metodo di spedizione

Fedex

UPS

DHL

NTN

Imballaggio

AVAQ determina e confeziona tutti i dispositivi in base ai requisiti di protezione contro le scariche elettrostatiche (ESD) e il livello di sensibilità all'umidità (MSL)..

Garanzia

Prodotto 365 giorni

Qualità garantita

Promettiamo di fornire un servizio di garanzia della qualità di 365 giorni per tutti i nostri prodotti.

Valutazioni e recensioni

Di più

E**y 01/31/2024

Packed goodly, not clear as it is not damaged during transportation,When the inclusion several times issued a mistake-6 then earned,The voltmeter readings are understated by two tens of volts, the reference voltmeter shows 12,8 volts, and the load display 12,6 v may be some kind of calibration but since there is no instruction-the user manual will have to die. It's good that in the internet there is already a video how to use the load.