Questo sito web utilizza i cookie. Utilizzando questo sito, acconsenti all'utilizzo dei cookie. Per ulteriori informazioni, dai un'occhiata al nostro politica sulla riservatezza.

Le immagini servono solo come riferimento,

Vedi Specifiche Tecniche

LAN9500I-ABZJ +BOM

This product operates at 3.3V and comes in a Tray packaging with a 56-Pin VQFN EP form factor

Produttore:

Microchip
ProduttorePart #:

LAN9500I-ABZJ
Scheda dati:

LAN9500I-ABZJ Scheda dati (PDF)
Series:

LAN9500
Product:

USB Controllers
Type:

Bridge, USB to Ethernet
Mounting Style:

SMD/SMT
EDA/CAD Modelli:

Richiedi modelli CAD gratuiti per LAN9500I-ABZJ

LAN9500I-ABZJ Descrizione generale

The LAN9500I-ABZJ, a pioneering creation from Microchip Technology, raises the bar for USB 2.0 to 10/100 Ethernet controllers with its unparalleled integration and cost-effectiveness. This single-chip solution, featuring a USB PHY, USB device controller, 10/100 Ethernet MAC, and Ethernet PHY, is a game-changer in adding Ethernet connectivity to various embedded systems, such as IoT devices, printers, set-top boxes, and more. It excels in delivering high-speed data transfer over USB connections, supporting both Full-Speed (12 Mbps) and Hi-Speed (480 Mbps) operation. The integrated Ethernet MAC and PHY of the LAN9500I-ABZJ uphold 10BASE-T and 100BASE-TX Ethernet standards, ensuring seamless compatibility with a wide spectrum of networking equipment. Furthermore, the inclusion of a built-in EEPROM simplifies device setup and initialization by providing a convenient means of storing device configuration and customization data. With its compact design, low power consumption, and comprehensive feature set, the LAN9500I-ABZJ emerges as a versatile and efficient solution for Ethernet connectivity in embedded systems

Caratteristiche principali

Highlights
Single Chip Hi-Speed USB 2.0 to 10/100 Ethernet
Controller
Integrated 10/100 Ethernet MAC with Full-Duplex
Support
Integrated 10/100 Ethernet PHY with HP Auto-MDIX
support
Integrated USB 2.0 Hi-Speed Device Controller
Integrated USB 2.0 Hi-Speed PHY
Implements Reduced Power Operating Modes
Key Features
USB Device Controller
— Fully compliant with Hi-Speed Universal Serial Bus
Specification Revision 2.0
— Supports HS (480 Mbps) and FS (12 Mbps) modes
— Four endpoints supported
— Supports vendor specific commands
— Integrated USB 2.0 PHY
— Remote wakeup supported
High-Performance 10/100 Ethernet Controller
— Fully compliant with IEEE802.3/802.3u
— Integrated Ethernet MAC and PHY
— 10BASE-T and 100BASE-TX support
— Full- and half-duplex support
— Full- and half-duplex flow control
— Preamble generation and removal
— Automatic 32-bit CRC generation and checking
— Automatic payload padding and pad removal
— Loop-back modes
— TCP/UDP/IP/ICMP checksum offload support
— Flexible address filtering modes
– One 48-bit perfect address
– 64 hash-filtered multicast addresses
– Pass all multicast
– Promiscuous mode
– Inverse filtering
– Pass all incoming with status report
— Wakeup packet support
— Integrated Ethernet PHY
– Auto-negotiation
– Automatic polarity detection and correction
– HP Auto-MDIX support
– Link status change wake-up detection
— Support for 3 status LEDs
— External MII and Turbo MII support HomePNA™ and
HomePlug® PHY
Power and I/Os
— Various low power modes
— NetDetach feature increases battery life 1
— Supports PCI-like PME wake 1
— 11 GPIOs
— Supports bus-powered and self-powered operation
— Integrated power-on reset circuit
— Single external 3.3v I/O supply
– Internal core regulator
Miscellaneous Features
— EEPROM Controller
— Supports custom operation without EEPROM 1
— IEEE 1149.1 (JTAG) Boundary Scan
— Requires single 25 MHz crystal
Software
— Windows XP/Vista Driver
— Linux Driver
— Win CE Driver
— MAC OS Driver
— EEPROM Utility
Packaging
— 56-pin QFN (8x8 mm) Lead-Free RoHS Compliant
Environmental
— Commercial Temperature Range (0°C to +70°C)
— Industrial Temperature Range (-40°C to +85°C)

Specifiche

Product Category	USB Interface IC	Series	LAN9500
Product	USB Controllers	Type	Bridge, USB to Ethernet
Mounting Style	SMD/SMT	Standard	USB 2.0
Supply Voltage - Min	3.3 V	Supply Voltage - Max	3.3 V
Minimum Operating Temperature	- 40 C	Maximum Operating Temperature	+ 85 C
Moisture Sensitive	Yes	Operating Supply Voltage	3.3 V
Product Type	USB Interface IC	Factory Pack Quantity	260
Subcategory	Interface ICs	Unit Weight	0.007055 oz
Programmabe	Not Verified	Protocol	Ethernet
Function	Bridge, USB to Ethernet	Interface	USB
Standards	USB 2.0, 10/100 Base-T/TX PHY	Voltage - Supply	3.3V
Current - Supply	78mA	Operating Temperature	-40°C ~ 85°C
Base Product Number	LAN9500

Politiche di servizio e altro

Relativi al servizio post-vendita e alla liquidazione

Pagamento

Metodo di pagamento

TT/bonifico bancario

PayPal

Western Union

Grammo dei soldi

Per canali di pagamento alternativi, contattaci a:

[email protected]

Spedizione e imballaggio

metodo di spedizione

Fedex

UPS

DHL

NTN

Imballaggio

AVAQ determina e confeziona tutti i dispositivi in base ai requisiti di protezione contro le scariche elettrostatiche (ESD) e il livello di sensibilità all'umidità (MSL)..