Questo sito web utilizza i cookie. Utilizzando questo sito, acconsenti all'utilizzo dei cookie. Per ulteriori informazioni, dai un'occhiata al nostro politica sulla riservatezza.

Le immagini servono solo come riferimento,

Vedi Specifiche Tecniche

DS1250ABP-100+ +BOM

NVSRAM (Non-Volatile SRAM) Memory IC 4Mbit Parallel 100 ns 34-PowerCap Module

Produttore:

Analog Devices, Inc
ProduttorePart #:

DS1250ABP-100+
Scheda dati:

DS1250ABP-100+ Scheda dati (PDF)
PackingQty:

Tray,40
PackingOption:

Tray
TempRange:

0 to 70C
EDA/CAD Modelli:

Richiedi modelli CAD gratuiti per DS1250ABP-100+

DS1250ABP-100+ Descrizione generale

The DS1250 4096k Nonvolatile SRAMs are 4,194,304-bit, fully static, nonvolatile SRAMs organized as 524,288 words by 8 bits. Each complete NV SRAM has a self-contained lithium energy source and control circuitry which constantly monitors V_CC for an out-of-tolerance condition. When such a condition occurs, the lithium energy source is automatically switched on and write protection is unconditionally enabled to prevent data corruption. DIP-package DS1250 devices can be used in place of existing 512k x 8 static RAMs directly conforming to the popular byte-wide 32-pin DIP standard. DS1250 devices in the PowerCap Module package are directly surface mountable and are normally paired with a DS9034PC PowerCap to form a complete Nonvolatile SRAM module. There is no limit on the number of write cycles that can be executed and no additional support circuitry is required for microprocessor interfacing.

Caratteristiche principali

10 years minimum data retention in the absence of external power
Data is automatically protected during power loss
Replaces 512k x 8 volatile static RAM, EEPROM or Flash memory
Unlimited write cycles
Low-power CMOS
Read and write access times of 70ns
Lithium energy source is electrically disconnected to retain freshness until power is applied for the first time
Full ±10% V_CC operating range (DS1250Y)
Optional ±5% V_CC operating range (DS1250AB)
Optional industrial temperature range of -40°C to +85°C, designated IND
JEDEC standard 32-pin DIP package
PowerCap Module (PCM) package
- Directly surface-mountable module
- Replaceable snap-on PowerCap provides lithium backup battery
- Standardized pinout for all nonvolatile SRAM products
- Detachment feature on PCM allows easy removal using a regular screwdriver

Specifiche

model	DS1250ABP-100+	packingQty	Tray,40
packingOption	Tray	lifeCycle	lastTimeToBuy
tempRange	0 to 70C

Politiche di servizio e altro

Relativi al servizio post-vendita e alla liquidazione

Pagamento

Metodo di pagamento

TT/bonifico bancario

PayPal

Western Union

Grammo dei soldi

Per canali di pagamento alternativi, contattaci a:

[email protected]

Spedizione e imballaggio

metodo di spedizione

Fedex

UPS

DHL

NTN

Imballaggio

AVAQ determina e confeziona tutti i dispositivi in base ai requisiti di protezione contro le scariche elettrostatiche (ESD) e il livello di sensibilità all'umidità (MSL)..