Questo sito web utilizza i cookie. Utilizzando questo sito, acconsenti all'utilizzo dei cookie. Per ulteriori informazioni, dai un'occhiata al nostro politica sulla riservatezza.

Le immagini servono solo come riferimento,

Vedi Specifiche Tecniche

Z8F6423FT020EG +BOM

64K flash memory, improved 4K RAM, and 2 UARTs included in this 8-bit microcontroller

Produttore:

IXYS CORP
ProduttorePart #:

Z8F6423FT020EG
Scheda dati:

Z8F6423FT020EG Scheda dati (PDF)
Pbfree Code:

Yes
Part Life Cycle Code:

Active
Pin Count:

80
Reach Compliance Code:

compliant
EDA/CAD Modelli:

Richiedi modelli CAD gratuiti per Z8F6423FT020EG

E-mail: [email protected]

Skype: live:.cid.ab6b29428937b76

tel: +852 95804164

Z8F6423FT020EG Descrizione generale

The Z8F6423FT020EG microcontroller by Zilog is a versatile and efficient embedded solution with a 8-bit MCU core operating at up to 20 MHz clock frequency. Boasting 64 KB of flash memory for program storage and 4 KB of SRAM for data storage, this microcontroller is well-equipped to handle a wide range of embedded applications. With built-in peripherals such as ADC, PWM, SPI, and UART interfaces, designers have the flexibility to adapt the Z8F6423FT020EG to various project requirements. Its operating voltage range of 2.7V to 3.6V and compact 52-pin QFN package further enhance its adaptability and suitability for diverse design needs. Moreover, the microcontroller prioritizes energy efficiency with multiple power-saving modes, making it an ideal choice for low power consumption applications

Caratteristiche principali

The key features of Z8 Encore! XP F082A Series products include:

20 MHz eZ8 CPU

1 KB, 2 KB, 4 KB, or 8 KB Flash memory with in-circuit programming capability

256 B, 512 B, or 1 KB register RAM

Up to 128 B nonvolatile data storage (NVDS)

Internal precision oscillator trimmed to 1% accuracy

External crystal oscillator, operating up to 20 MHz

Optional 8-channel, 10-bit analog-to-digital converter (ADC)

Optional on-chip temperature sensor

On-chip analog comparator

Optional on-chip low-power operational amplifier (LPO)

Full-duplex UART

The UART baud rate generator (BRG) can be configured and used as a basic 16-bit timer

Infrared Data Association (IrDA)-compliant infrared encoder/decoders, integrated

with the UART

Two enhanced 16-bit timers with capture, compare and PWM capability

Watchdog Timer (WDT) with dedicated internal RC oscillator

Up to 20 vectored interrupts

6 to 25 I/O pins depending upon package

Up to thirteen 5 V-tolerant input pins

Up to 8 ports capable of direct LED drive with no current limit resistor required

On-Chip Debugger (OCD)

Voltage Brown-Out (VBO) protection

Programmable low battery detection (LVD) (8-pin devices only)

Bandgap generated precision voltage references available for the ADC, comparator,

VBO and LVD

Power-On Reset (POR)

2.7 V to 3.6 V operating voltage

8-, 20- and 28-pin packages

0C to +70C and 40C to +105C for operating temperature ranges

Specifiche

Pbfree Code	Yes	Part Life Cycle Code	Active
Pin Count	80	Reach Compliance Code	compliant
HTS Code	8542.31.00.01	Has ADC	YES
Address Bus Width		Bit Size	8
CPU Family	Z8	Clock Frequency-Max	20 MHz
DAC Channels	NO	DMA Channels	YES
External Data Bus Width		JESD-30 Code	R-PQFP-G80
JESD-609 Code	e3	Length	20 mm
Number of I/O Lines	60	Number of Terminals	80
Operating Temperature-Max	105 °C	Operating Temperature-Min	-40 °C
PWM Channels	YES	Power Supplies	3.3 V
Qualification Status	Not Qualified	RAM (bytes)	4096
ROM (words)	65536	ROM Programmability	FLASH
Seated Height-Max	3.18 mm	Speed	20 MHz
Supply Current-Max	16 mA	Supply Voltage-Max	3.6 V
Supply Voltage-Min	3 V	Supply Voltage-Nom	3.3 V
Surface Mount	YES	Technology	CMOS
Temperature Grade	INDUSTRIAL	Terminal Finish	MATTE TIN
Terminal Form	GULL WING	Terminal Pitch	0.8 mm
Terminal Position	QUAD	Width	14 mm
uPs/uCs/Peripheral ICs Type	MICROCONTROLLER

Politiche di servizio e altro

Relativi al servizio post-vendita e alla liquidazione

Pagamento

Metodo di pagamento

TT/bonifico bancario

PayPal

Western Union

Grammo dei soldi

Per canali di pagamento alternativi, contattaci a:

[email protected]

Spedizione e imballaggio

metodo di spedizione

Fedex

UPS

DHL

NTN

Imballaggio

AVAQ determina e confeziona tutti i dispositivi in base ai requisiti di protezione contro le scariche elettrostatiche (ESD) e il livello di sensibilità all'umidità (MSL)..