Questo sito web utilizza i cookie. Utilizzando questo sito, acconsenti all'utilizzo dei cookie. Per ulteriori informazioni, dai un'occhiata al nostro politica sulla riservatezza.

Le immagini servono solo come riferimento,

Vedi Specifiche Tecniche

W25Q32JVTCIQ +BOM

Uniform 4KB sectors

Produttore:

WINBOND ELECTRONICS CORP
ProduttorePart #:

W25Q32JVTCIQ
Scheda dati:

W25Q32JVTCIQ Scheda dati (PDF)
Pbfree Code:

Yes
Part Life Cycle Code:

Active
Reach Compliance Code:

compliant
ECCN Code:

EAR99

E-mail: [email protected]

Skype: live:.cid.ab6b29428937b76

tel: +852 95804164

W25Q32JVTCIQ Descrizione generale

The W25Q32JVTCIQ, produced by Winbond, is a remarkable addition to the W25Q-JV series. Its 32 megabits of storage capacity, equipped with a Quad SPI interface for faster data transfer rates, make it a versatile choice for a wide range of applications. With a voltage range of 2.7V to 3.6V, this flash memory chip ensures compatibility and reliability across various devices. Its flexible architecture, supporting both standard SPI commands and Quad SPI commands, offers enhanced performance and security features. The inclusion of hardware-based protection for critical data and a unique factory-programmed 64-bit serial number further solidifies its appeal in the consumer electronics, industrial, automotive, and communication sectors. The W25Q32JVTCIQ's small form factor and low power consumption make it an ideal solution for non-volatile storage needs in firmware, configuration data, and other essential information

Caratteristiche principali

New Family of SpiFlash Memories
– W25Q32JV: 32M-bit / 4M-byte
– Standard SPI: CLK, /CS, DI, DO
– Dual SPI: CLK, /CS, IO0, IO1
– Quad SPI: CLK, /CS, IO0, IO1, IO2, IO3
– Software & Hardware Reset(1)
Highest Performance Serial Flash
– 133MHz Single, Dual/Quad SPI clocks
– 266/532MHz equivalent Dual/Quad SPI
– 66MB/S continuous data transfer rate
– Min. 100K Program-Erase cycles per sector
– More than 20-year data retention
Efficient “Continuous Read”
– Continuous Read with 8/16/32/64-Byte Wrap
– As few as 8 clocks to address memory
– Allows true XIP (execute in place) operation
– Outperforms X16 Parallel Flash
Low Power, Wide Temperature Range
– Single 2.7V to 3.6V supply
– <1µA Power-down (typ.)
– -40°C to +85°C operating range
Flexible Architecture with 4KB sectors
– Uniform Sector/Block Erase (4K/32K/64K-Byte)
– Program 1 to 256 byte per programmable page
– Erase/Program Suspend & Resume
Advanced Security Features
– Software and Hardware Write-Protect
– Special OTP protection(2)
– Top/Bottom, Complement array protection
– Individual Block/Sector array protection
– 64-Bit Unique ID for each device
– Discoverable Parameters (SFDP) Register
– 3X256-Bytes Security Registers
– Volatile & Non-volatile Status Register Bits
Space Efficient Packaging
– 8-pin SOIC/VSOP 208-mil
– 8-pad WSON 6x5-mm, XSON 4x4-mm
– 16-pin SOIC 300-mil
– 8-pin PDIP 300-mil
– 24-ball TFBGA 8x6-mm (6x4 ball array)
– 24-ball TFBGA 8x6-mm (6x4/5x5 ball array)
– Contact Winbond for KGD and other options

Specifiche

Pbfree Code	Yes	Part Life Cycle Code	Active
Reach Compliance Code	compliant	ECCN Code	EAR99
HTS Code	8542.32.00.51	Additional Feature	2.7V NOMINAL AVAILABLE WITH 104MHZ
Alternate Memory Width	1	Clock Frequency-Max (fCLK)	133 MHz
JESD-30 Code	R-PBGA-B24	JESD-609 Code	e1
Length	8 mm	Memory Density	33554432 bit
Memory IC Type	FLASH	Memory Width	8
Number of Functions	1	Number of Terminals	24
Number of Words	4194304 words	Number of Words Code	4000000
Operating Mode	SYNCHRONOUS	Operating Temperature-Max	85 °C
Operating Temperature-Min	-40 °C	Organization	4MX8
Parallel/Serial	SERIAL	Peak Reflow Temperature (Cel)	260
Programming Voltage	3 V	Seated Height-Max	1.2 mm
Supply Voltage-Max (Vsup)	3.6 V	Supply Voltage-Min (Vsup)	3 V
Supply Voltage-Nom (Vsup)	3.3 V	Surface Mount	YES
Technology	CMOS	Temperature Grade	INDUSTRIAL
Terminal Finish	TIN SILVER COPPER	Terminal Form	BALL
Terminal Pitch	1 mm	Terminal Position	BOTTOM
Width	6 mm	Product Category	NOR Flash
Mounting Style	SMD/SMT	Series	W25Q32JV
Memory Size	32 Mbit	Supply Voltage - Min	2.7 V
Supply Voltage - Max	3.6 V	Active Read Current - Max	25 mA
Interface Type	SPI	Maximum Clock Frequency	133 MHz
Data Bus Width	8 bit	Timing Type	Synchronous
Minimum Operating Temperature	- 40 C	Maximum Operating Temperature	+ 85 C
Moisture Sensitive	Yes	Product Type	NOR Flash
Factory Pack Quantity	960	Subcategory	Memory & Data Storage
Tradename	SpiFlash

Politiche di servizio e altro

Relativi al servizio post-vendita e alla liquidazione

Pagamento

Metodo di pagamento

TT/bonifico bancario

PayPal

Western Union

Grammo dei soldi

Per canali di pagamento alternativi, contattaci a:

[email protected]

Spedizione e imballaggio

metodo di spedizione

Fedex

UPS

DHL

NTN

Imballaggio

AVAQ determina e confeziona tutti i dispositivi in base ai requisiti di protezione contro le scariche elettrostatiche (ESD) e il livello di sensibilità all'umidità (MSL)..