Metodo di pagamento
VN5050JTR-E
Single channel high side driver for automotive applications
-
Produttore:
-
ProduttorePart #:
VN5050JTR-E
-
Scheda dati:
-
Operating Range:
Automotive
-
ECCN US:
EAR99
-
ECCN EU:
NEC
-
Packing Type:
Tape And Reel
Disponibilità: 3427 PZ
Compila il breve modulo sottostante e ti forniremo immediatamente il preventivo.
VN5050JTR-E Descrizione generale
The VN5050J-E is a monolithic device made using STMicroelectronics VIPower technology. It is intended for driving resistive or inductive loads with one side connected to ground. Active VCCpin voltage clamp protects the device against low energy spikes (see ISO7637 transient compatibility table). The device detects open load condition both in on and off state, when STAT_DIS is left open or driven low. Output shorted to VCCis detected in the off state.When STAT_DIS is driven high, the STATUS pin is in a high impedance condition.Output current limitation protects the device in overload condition. In case of long duration overload, the device limits the dissipated power to safe level up to thermal shut-down intervention.Thermal shutdown with automatic restart allows the device to recover normal operation as soon as fault condition disappears.
Caratteristiche principali
- Main Inrush current active management by power limitation Very low stand-by current 3.0V CMOS compatible input Optimized electromagnetic emission Very low electromagnetic susceptibility In compliance with the 2002/95/EC European directive
- Protections Undervoltage shut-down Overvoltage clamp Output stuck to VCC detection Load current limitation Self limiting of fast thermal transients Protection against loss of ground and loss of VCC Thermal shut down Reverse battery protection (see Figure 27) Electrostatic discharge protection
- Diagnostic functions Open drain status output On state open load detection Off state open load detection Thermal shutdown indication
Specifiche
Operating Range | Automotive | ECCN US | EAR99 |
ECCN EU | NEC | Packing Type | Tape And Reel |
Grade | Automotive |
Politiche di servizio e altro
Relativi al servizio post-vendita e alla liquidazione
Per canali di pagamento alternativi, contattaci a:
[email protected]metodo di spedizione
AVAQ determina e confeziona tutti i dispositivi in base ai requisiti di protezione contro le scariche elettrostatiche (ESD) e il livello di sensibilità all'umidità (MSL)..
Prodotto 365 giorni
Qualità garantita
Promettiamo di fornire un servizio di garanzia della qualità di 365 giorni per tutti i nostri prodotti.
Disponibilità: 3427 PCS
+BOMQtà. | Prezzo unitario | Est. Prezzo |
---|---|---|
1+ | - | - |
I prezzi sottostanti sono solo di riferimento.
Tutte le distinte materiali (BOM) possono essere inviate via e-mail a [email protected], oppure compila il modulo sottostante per effettuare un preventivo per VN5050JTR-E, preventivi garantiti entro 12 ore.
The voltage does not write 5 v calisoyor sandin. Pek cogu 75, 80 calisti with 5 v but the rest was received. Then looked at 3 V mousse :) urun medium quality, eh iste. Instead the strip led alip is more manic to solder by cutting, or one by one. 3mm liquees would be better for circuits.