Questo sito web utilizza i cookie. Utilizzando questo sito, acconsenti all'utilizzo dei cookie. Per ulteriori informazioni, dai un'occhiata al nostro Privacy Policy.

Le immagini servono solo come riferimento,

Vedi Specifiche Tecniche

TXS0102YZPR +BOM

2-Bit Bidirectional Voltage-Level Shifter for Open-Drain and Push-Pull Application

Produttore:

Texas Instruments, Inc
ProduttorePart #:

TXS0102YZPR
Scheda dati:

TXS0102YZPR Scheda dati (PDF)
Technology family:

TXS
Applications:

I2C, MDIO
Bits (#):

2
Data rate (max) (MBps):

24
EDA/CAD Modelli:

Richiedi modelli CAD gratuiti per TXS0102YZPR

E-mail: [email protected]

Skype: live:.cid.ab6b29428937b76

tel: +852 95804164

TXS0102YZPR Descrizione generale

This two-bit non-inverting translator is a bidirectional voltage-level translator and can be used to establish digital switching compatibility between mixed-voltage systems. It uses two separate configurable power-supply rails, with the A ports supporting operating voltages from 1.65 V to 3.6 V while it tracks the V CCA supply, and the B ports supporting operating voltages from 2.3 V to 5.5 V while it tracks the V CCB supply. This allows the support of both lower and higher logic signal levels while providing bidirectional translation capabilities between any of the 1.8-V, 2.5-V, 3.3-V, and 5-V voltage nodes.

When the output-enable (OE) input is low, all I/Os are placed in the high-impedance state, which significantly reduces the power-supply quiescent current consumption.

To ensure the high-impedance state during power up or power down, OE should be tied to GND through a pulldown resistor; the minimum value of the resistor is determined by the current-sourcing capability of the driver.

Caratteristiche principali

No direction-control signal needed
Maximum data rates:
- 24 Mbps (push pull)
- 2 Mbps (open drain)
Available in the Texas Instruments NanoStar™ integrated circuit package
1.65 V to 3.6 V on A port and 2.3 V to 5.5 V on B port (V CCA ≤ V CCB)
V CC isolation feature: if either V CC input is at GND, both ports are in the High-Impedance state
No power-supply sequencing required: either V CCA or V CCB can be ramped first
I off supports partial-power-down mode operation
Latch-up performance exceeds 100 mA per JESD 78, Class II
ESD protection exceeds JESD 22:
- A port:
  - 2500-V Human-Body Model (A114-B)
  - 250-V Machine Model (A115-A)
  - 1500-V Charged-Device Model (C101)
- B port:
  - 8-kV Human-Body Model (A114-B)
  - 250-V Machine Model (A115-A)
  - 1500-V Charged-Device Model (C101)

Specifiche

Technology family	TXS	Applications	I2C, MDIO
Bits (#)	2	Data rate (max) (MBps)	24
High input voltage (min) (V)	1.45	High input voltage (max) (V)	5.5
Vout (min) (V)	1.65	Vout (max) (V)	5.5
IOH (max) (mA)	0	IOL (max) (mA)	0
Supply current (max) (µA)	10	Features	Edge rate accelerator, Output enable, Partial power down (Ioff), Vcc isolation
Input type	Transmission Gate	Output type	3-State, Transmission Gate
Rating	Catalog	Operating temperature range (°C)	-40 to 85
feature-logic-family	TXS	feature-logic-function	Voltage Level Translator
feature-translation		feature-process-technology
feature-output-type	3-State\|Open Drain\|Push-Pull	feature-maximum-low-level-output-current-ma	1
feature-maximum-high-level-output-current-ma	-0.02	feature-minimum-operating-supply-voltage-v	1.65/2.3
feature-maximum-operating-supply-voltage-v	3.6/5.5	feature-packaging	Tape and Reel
feature-rad-hard	No	feature-pin-count	8
feature-cecc-qualified	No	feature-esd-protection	Yes
feature-military	No	feature-aec-qualified	No
feature-aec-qualified-number		feature-auto-motive	No
feature-p-pap	No	feature-eccn-code	EAR99
feature-svhc	Yes	feature-svhc-exceeds-threshold	No

Politiche di servizio e altro

Relativi al servizio post-vendita e alla liquidazione

Pagamento

Metodo di pagamento

TT/bonifico bancario

PayPal

Western Union

Grammo dei soldi

Per canali di pagamento alternativi, contattaci a:

[email protected]

Spedizione e imballaggio

metodo di spedizione

Fedex

UPS

DHL

NTN

Imballaggio

AVAQ determina e confeziona tutti i dispositivi in base ai requisiti di protezione contro le scariche elettrostatiche (ESD) e il livello di sensibilità all'umidità (MSL)..