Questo sito web utilizza i cookie. Utilizzando questo sito, acconsenti all'utilizzo dei cookie. Per ulteriori informazioni, dai un'occhiata al nostro politica sulla riservatezza.

Le immagini servono solo come riferimento,

Vedi Specifiche Tecniche

TXS0102DCTR +BOM

2-Channel Bi-Directional Voltage Converter 8-Pin SSOP Tape and Reel

Produttore:

Texas Instruments
ProduttorePart #:

TXS0102DCTR
Scheda dati:

TXS0102DCTR Scheda dati (PDF)
Translator Type:

Voltage Level
Channel Type:

Bidirectional
Number Of Circuits:

1
Channels Per Circuit:

2
EDA/CAD Modelli:

Richiedi modelli CAD gratuiti per TXS0102DCTR

E-mail: [email protected]

Skype: live:.cid.ab6b29428937b76

tel: +852 95804164

TXS0102DCTR Descrizione generale

This two-bit non-inverting translator is a bidirectional voltage-level translator and canbe used to establish digital switching compatibility between mixed-voltage systems. It uses twoseparate configurable power-supply rails, with the A ports supporting operating voltages from 1.65V to 3.6 V while it tracks the VCCA supply, and the B ports supportingoperating voltages from 2.3 V to 5.5 V while it tracks the VCCB supply. Thisallows the support of both lower and higher logic signal levels while providing bidirectionaltranslation capabilities between any of the 1.8-V, 2.5-V, 3.3-V, and 5-V voltage nodes.

When the output-enable (OE) input is low, all I/Os are placed in the high-impedancestate, which significantly reduces the power-supply quiescent current consumption.

To ensure the high-impedance state during power up or power down, OE should be tied toGND through a pulldown resistor; the minimum value of the resistor is determined by thecurrent-sourcing capability of the driver.

Caratteristiche principali

No Direction-Control Signal Needed
Maximum Data Rates
- 24 Mbps (Push Pull)
- 2 Mbps (Open Drain)
Available in the Texas Instruments NanoStar?Package
1.65 V to 3.6 V on A Port and 2.3 V to 5.5 V on B Port (VCCA≤ VCCB)
VCC Isolation Feature: If Either VCCInput Is at GND, Both Ports Are in the High-Impedance State
No Power-Supply Sequencing Required: Either VCCA orVCCB Can Be Ramped First
Ioff Supports Partial-Power-Down Mode Operation
Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II
ESD Protection Exceeds JESD 22
- A Port:
  - 2500-V Human-Body Model (A114-B)
  - 250-V Machine Model (A115-A)
  - 1500-V Charged-Device Model (C101)
- B Port:
  - 8-kV Human-Body Model (A114-B)
  - 250-V Machine Model (A115-A)
  - 1500-V Charged-Device Model (C101)

Specifiche

Category	Integrated Circuits (ICs)LogicTranslators, Level Shifters	Series	-
Translator Type	Voltage Level	Channel Type	Bidirectional
Number of Circuits	1	Channels per Circuit	2
Voltage - VCCA	1.65 V ~ 3.6 V	Voltage - VCCB	2.3 V ~ 5.5 V
Input Signal	-	Output Signal	-
Output Type	Open Drain, Push-Pull	Data Rate	24Mbps
Operating Temperature	-40°C ~ 85°C (TA)	Features	Auto-Direction Sensing
Mounting Type	Surface Mount	Base Product Number	TXS0102

Politiche di servizio e altro

Relativi al servizio post-vendita e alla liquidazione

Pagamento

Metodo di pagamento

TT/bonifico bancario

PayPal

Western Union

Grammo dei soldi

Per canali di pagamento alternativi, contattaci a:

[email protected]

Spedizione e imballaggio

metodo di spedizione

Fedex

UPS

DHL

NTN

Imballaggio

AVAQ determina e confeziona tutti i dispositivi in base ai requisiti di protezione contro le scariche elettrostatiche (ESD) e il livello di sensibilità all'umidità (MSL)..