Questo sito web utilizza i cookie. Utilizzando questo sito, acconsenti all'utilizzo dei cookie. Per ulteriori informazioni, dai un'occhiata al nostro politica sulla riservatezza.

Le immagini servono solo come riferimento,

Vedi Specifiche Tecniche

TMS37157IRSARG4 +BOM

Passive Low Frequency Interface Device (PaLFI) With EEPROM and 134.2 kHz Transponder Interface

Produttore:

Texas Instruments, Inc
ProduttorePart #:

TMS37157IRSARG4
Scheda dati:

TMS37157IRSARG4 Scheda dati (PDF)
Type:

RFID Transponder
Frequency:

134.2kHz
Interface:

SPI
Voltage - Supply:

2V ~ 3.6V
EDA/CAD Modelli:

Richiedi modelli CAD gratuiti per TMS37157IRSARG4

E-mail: [email protected]

Skype: live:.cid.ab6b29428937b76

tel: +852 95804164

TMS37157IRSARG4 Descrizione generale

In addition to managing Transponder communication and push button interaction, the TMS37157 also excels in power management, entering a special low power mode with a current consumption of only 60 nA during sleep state. The EEPROM memory is easily accessible over the LF interface without battery support or through SPI with a connected microcontroller, and the device offers a special battery charge mode

Caratteristiche principali

Wide Supply Voltage Range 2 V to 3.6 V
Ultra Low Power Consumption
- Active Mode Max. 150 µA
- Power Down Mode 60 nA
121 Free Bytes User Memory
Low Frequency Halb Duplex (HDX) Interface
- HDX Transponder Communication Achieving Maximum
  Perfomance and Highest Noise Immunity
- Special Selective Addressing Mode Allows
  Anti Collision
- Up to 8 kbit/s LF Uplink Data Rate
- 126 Byte EEPROM:
  - 121 Bytes Free Available EEPROM User Memory
  - 32 Bit Unique Serial Number
  - 8 Bit Selective Address
  - High EEPROM Flexibility
  - Pages are Irreversible Lockable and Protectable
- Battery Check and Battery Charge Function
- Resonance Frequency: 134.2 kHz
- Integrated Resonance Frequency Trimming
- Downlink – Amplitude Shift Keying
- Uplink – Frequency Shift Keying
3 Wire SPI Interface for Accessing the EEPROM and
Exchanging Data With the Microcontroller Through
the LF Interface
0.6mm Pitch, 4mm x 4mm VQFN Package
APPLICATIONS
- Wireless Batteryless Sensor Interface using
  Energy Harvesting
  - Microcontroller and Sensor can be Powered Through the
    LF Link
  - Data is Directly Transmitted Over the LF Link From the
    Base Station via the TMS37157 to the Micrcontroller and Vice
    Versa.
- Batteryless Configuration Memory
  - Memory can be Written Without Battery Support
  - Microcontroller can Read the Content of the Memory When
    It Gets Connected to a Battery and Use It for Configuration
  - Microcontroller can Write the Memory, Which can be Read Out
    Later Through the LF Link
- Ultra Low Power Data Logger Memory (Smart Metering)
  - Memory Can Be Written By a Microcontroller
  - Memory Can Be Read Through LF Interface Without
    Battery Support
- Multi Purpose LF Interface to a Microcontroller
  - Short Range RF Interface to a Microcontroller Where
    Other Frequencies are Not an Option
  - Ultra Low Power Mode can Result in an
    Overall Power Consumption of 60 nA
- Remote Control Application
  - Combination With an UHF Transmitter or IR Transmitter and a µC
  - Power Management of the TMS37157 can Power Down
    the Microcontroller
  - The Push Button Detection Circuit can Power Up a
    Microcontroller
- Stand Alone LF-Transponder with Memory
  - RFID Transponder with Unique ID and 121
    Bytes Free Programmable EEPROM User Memory
  - Only Few Additional Components Needed
  - No Battery Required

Specifiche

Category	RF and WirelessRFID, RF Access, Monitoring ICs	Series	-
Type	RFID Transponder	Frequency	134.2kHz
Standards	-	Interface	SPI
Voltage - Supply	2V ~ 3.6V	Operating Temperature	-40°C ~ 85°C
Mounting Type	Surface Mount	Base Product Number	TMS37157
Frequency range	134.2 kHz	Standard	TI protocol
Operating temperature range (°C)	-40 to 85	Rating	Automotive
Transmission principle	HDX - FSK	feature-packaging	Tape and Reel
feature-pin-count	16	feature-cecc-qualified	No
feature-esd-protection		feature-military	No
feature-aec-qualified	No	feature-aec-qualified-number
feature-eccn-code	EAR99	feature-svhc	No
feature-svhc-exceeds-threshold	No

Politiche di servizio e altro

Relativi al servizio post-vendita e alla liquidazione

Pagamento

Metodo di pagamento

TT/bonifico bancario

PayPal

Western Union

Grammo dei soldi

Per canali di pagamento alternativi, contattaci a:

[email protected]

Spedizione e imballaggio

metodo di spedizione

Fedex

UPS

DHL

NTN

Imballaggio

AVAQ determina e confeziona tutti i dispositivi in base ai requisiti di protezione contro le scariche elettrostatiche (ESD) e il livello di sensibilità all'umidità (MSL)..

Garanzia

Prodotto 365 giorni

Qualità garantita

Promettiamo di fornire un servizio di garanzia della qualità di 365 giorni per tutti i nostri prodotti.

Valutazioni e recensioni

Di più

T**r 09/16/2023

Alas, the goods came to me. received in the country. The seller responded adequately and repaid the price. I hope that the next order will arrive on time.

C**b 09/28/2021

Perfect and sounds like shit

Z**e 05/17/2021

Good work, fast arrival. Not yet tested but seems OK