Metodo di pagamento
TMC8462-BA +BOM
Product TMC8462-BA is an EtherCAT slave controller
AN-
Produttore:
-
ProduttorePart #:
TMC8462-BA
-
Scheda dati:
-
Series:
EtherCAT®
-
Programmable:
Not Verified
-
Protocol:
Ethernet
-
Function:
Controller
All bill of materials (BOM) can be sent via email to [email protected], or fill below form to Quote for TMC8462-BA, guaranteed quotes back within 12hr.
Disponibilità: 7170 PZ
Compila il breve modulo sottostante e ti forniremo immediatamente il preventivo.
TMC8462-BA Descrizione generale
Ethernet Controller SPI Interface 121-BGA (9x9)
Caratteristiche principali
- Standard compliant EtherCAT slave controller
- 8 High Voltage I/Os (up to 35V, 100mA)
- 2x switching regulator for system supply
- Multifunction block comprises Watchdog, 4 PWM outputs and Step/Dir generator
- 2 integrated 100Mbit Ethernet PHYs
Specifiche
Category | Integrated Circuits (ICs)InterfaceControllers | Series | EtherCAT® |
Programmable | Not Verified | Protocol | Ethernet |
Function | Controller | Interface | SPI |
Standards | - | Voltage - Supply | 3.15V ~ 3.45V, 4.75V ~ 34V |
Current - Supply | - | Operating Temperature | -40°C ~ 125°C (TJ) |
Base Product Number | TMC8462 |
Politiche di servizio e altro
Relativi al servizio post-vendita e alla liquidazione
Per canali di pagamento alternativi, contattaci a:
[email protected]metodo di spedizione
AVAQ determina e confeziona tutti i dispositivi in base ai requisiti di protezione contro le scariche elettrostatiche (ESD) e il livello di sensibilità all'umidità (MSL)..
Prodotto 365 giorni
Qualità garantita
Promettiamo di fornire un servizio di garanzia della qualità di 365 giorni per tutti i nostri prodotti.
In Stock: 7.170
Minimum Order: 1
Qtà. | Prezzo unitario | Est. Prezzo |
---|---|---|
1+ | - | - |
I prezzi sottostanti sono solo di riferimento.
Of the 3 modules ordered, one did not earn. A little later it turned out that the other two work with failures. The problem was in poor contacts between the display itself and the board. At the top of the module there is a contact pad that connects the board to the display, there is received contact, because. Between the board and the display is a small backlash. Solving the problem is simple: received the two upper ear-latches by pressing the board to the display. After that, all three modules work stably.