Questo sito web utilizza i cookie. Utilizzando questo sito, acconsenti all'utilizzo dei cookie. Per ulteriori informazioni, dai un'occhiata al nostro politica sulla riservatezza.

TLC2264CN +BOM

Quad, 16-V, 710-kHz operational amplifier

TLC2264CN Descrizione generale

The TLC2262 and TLC2264 are dual and quadruple operational amplifiers from Texas Instruments. Both devices exhibit rail-to-rail output performance for increased dynamic range in single- or split-supply applications. The TLC226x family offers a compromise between the micropower TLC225x and the ac performance of the TLC227x. It has low supply current for battery-powered applications, while still having adequate ac performance for applications that demand it. The noise performance has been dramatically improved over previous generations of CMOS amplifiers. Figure 1 depicts the low level of noise voltage for this CMOS amplifier, which has only 200 uA (typ) of supply current per amplifier.

The TLC226x, exhibiting high input impedance and low noise, are excellent for small-signal conditioning for high-impedance sources, such as piezoelectric transducers. Because of the micropower dissipation levels, these devices work well in hand-held monitoring and remote-sensing applications. In addition, the rail-to-rail output feature with single or split supplies makes this family a great choice when interfacing with analog-to-digital converters (ADCs). For precision applications, the TLC226xA family is available and has a maximum input offset voltage of 950 uV. This family is fully characterized at 5 V and ±5 V.

The TLC2262/4 also makes great upgrades to the TLC27M2/L4 or TS27M2/L4 in standard designs. They offer increased output dynamic range, lower noise voltage and lower input offset voltage. This enhanced feature set allows them to be used in a wider range of applications. For applications that require higher output drive and wider input voltage range, see the TLV2432 and TLV2442. If your design requires single amplifiers, please see the TLV2211/21/31 family. These devices are single rail-to-rail operational amplifiers in the SOT-23 package. Their small size and low power consumption, make them ideal for high density, battery-powered equipment.

tlc2264cn

Caratteristiche principali

  • Output Swing includes Both Supply Rails
  • Low Noise.12 nV/Hz\ Typ at f = 1 kHz
  • Low Input Bias Current.1 pA Typ
  • Fully Specified for Both Single-Supply and Split-Supply Operation
  • Low Power.500 uA Max
  • Common-Mode Input Voltage Range Includes Negative Rail
  • Low Input Offset Voltage
  • 950 uV Max at TA = 25°C (TLC2262A)
  • Macromodel Included
  • Performance Upgrade for the TS27M2/M4 and TLC27M2/M4
  • Available in Q-Temp Automotive
    HighRel Automotive Applications
    Configuration Control/Print Support
    Qualification to Automotive Standards

Advanced LinCMOS is a trademark of Texas Instruments.

Specifiche

Number of channels 4 Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V) 16
Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V) 4.4 Rail-to-rail In to V-, Out
GBW (typ) (MHz) 0.71 Slew rate (typ) (V/µs) 0.55
Vos (offset voltage at 25°C) (max) (mV) 2.5 Iq per channel (typ) (mA) 0.2
Vn at 1 kHz (typ) (nV√Hz) 12 Rating Catalog
Operating temperature range (°C) 0 to 70 Offset drift (typ) (µV/°C) 2
Features High Cload Drive Input bias current (max) (pA) 60
CMRR (typ) (dB) 83 Iout (typ) (A) 0.0022
Architecture CMOS Input common mode headroom (to negative supply) (typ) (V) -0.3
Input common mode headroom (to positive supply) (typ) (V) -0.8 Output swing headroom (to negative supply) (typ) (V) 0.01
Output swing headroom (to positive supply) (typ) (V) -0.06 feature-type Low Noise Amplifier
feature-number-of-channels-per-chip 4 feature-rail-to-rail Rail to Rail Output
feature-process-technology LinCMOS feature-output-type CMOS
feature-maximum-input-offset-voltage-mv 2.5@±2.5V feature-maximum-supply-current-ma
feature-maximum-input-offset-current-ua 0.0000005(Typ)@±2.5V feature-maximum-input-bias-current-ua 0.0001@±2.5V@0C to 70C
feature-maximum-power-dissipation-mw 1150 feature-typical-slew-rate-v-us 0.55@5V
feature-typical-gain-bandwidth-product-mhz 0.71 feature-shut-down-support No
feature-packaging Tube feature-rad-hard No
feature-pin-count 14 feature-cecc-qualified No
feature-esd-protection feature-escc-qualified
feature-military No feature-aec-qualified No
feature-aec-qualified-number feature-eccn-code EAR99
feature-svhc No feature-svhc-exceeds-threshold No

Politiche di servizio e altro

Relativi al servizio post-vendita e alla liquidazione

payment Pagamento

Metodo di pagamento

hsbc
TT/bonifico bancario
paypal
PayPal
wu
Western Union
mg
Grammo dei soldi

Per canali di pagamento alternativi, contattaci a:

[email protected]
spedizione Spedizione e imballaggio

metodo di spedizione

fedex
Fedex
ups
UPS
dhl
DHL
tnt
NTN
Imballaggio

AVAQ determina e confeziona tutti i dispositivi in base ai requisiti di protezione contro le scariche elettrostatiche (ESD) e il livello di sensibilità all'umidità (MSL)..

Garanzia Garanzia

Promettiamo di fornire un servizio di garanzia della qualità di 365 giorni per tutti i nostri prodotti.

Valutazioni e recensioni

Di più
B
B**O 04/05/2020

The item was delivered very fast, corresponds with description. I will purchase more.The goods are received in the shortest possible time, corresponds to the description. I'll buy more.

4

Recensioni

You need to log in to reply. Registrazione | Iscrizione