Metodo di pagamento
STK672-610 +BOM
Purchase today and receive fast shipping process
19-SIP-
Produttore:
-
ProduttorePart #:
STK672-610
-
Scheda dati:
-
Motor Type - Stepper:
Unipolar
-
Function:
Driver - Fully Integrated, Control and Power Stage
-
Output Configuration:
Half Bridge (2)
-
Interface:
Parallel
-
EDA/CAD Modelli:
All bill of materials (BOM) can be sent via email to [email protected], or fill below form to Quote for STK672-610, guaranteed quotes back within 12hr.
Disponibilità: 7747 PZ
Compila il breve modulo sottostante e ti forniremo immediatamente il preventivo.
STK672-610 Descrizione generale
Additionally, the STK672-610 offers flexibility in motor control strategies with support for both full-step and half-step driving modes. This allows for precise and customizable control of the stepping motor, catering to the specific requirements of different applications or industries. The pulse input control method further adds to the versatility of this IC, offering a comprehensive solution for motor control needs
Caratteristiche principali
The motor speed can be controlled by the frequency of an external clock signal.
2-phase excitation or 1-2 phase excitation is selected according to switching the state of the MODE1 pin (low or high).
The excitation mode is set at the rising edge of the clock signal when the MODE2 pin is High, or at the rising edge or falling edge when the MODE2 pin is Low.
The phase is maintained even if the excitation mode is switched in the middle of operation.
The direction of rotation can be changed by applying a High or Low signal to the CWB pin used to select the direction of rotation.
Supports schmitt input for 2.5V high level input.
Incorporating a current detection resistor (0.089: resistor tolerance 2%), motor current can be set using two external resistors.
Equipped with an ENABLE pin that, during clock input, allows motor output to be cut-off and resumed later while maintaining the same excitation timing.
Applicazione
Office photocopiers, printers, etc.
Specifiche
Motor Type - Stepper | Unipolar | Motor Type - AC, DC | - |
Function | Driver - Fully Integrated, Control and Power Stage | Output Configuration | Half Bridge (2) |
Interface | Parallel | Technology | Power MOSFET |
Step Resolution | 1, 1/2 | Applications | General Purpose |
Current - Output | 3.3A | Voltage - Supply | 4.75V ~ 5.25V |
Voltage - Load | 10V ~ 42V | Operating Temperature | 0°C ~ 105°C (TC) |
Mounting Type | Through Hole |
Politiche di servizio e altro
Relativi al servizio post-vendita e alla liquidazione
Per canali di pagamento alternativi, contattaci a:
[email protected]metodo di spedizione
AVAQ determina e confeziona tutti i dispositivi in base ai requisiti di protezione contro le scariche elettrostatiche (ESD) e il livello di sensibilità all'umidità (MSL)..
Prodotto 365 giorni
Qualità garantita
Promettiamo di fornire un servizio di garanzia della qualità di 365 giorni per tutti i nostri prodotti.
In Stock: 7.747
Minimum Order: 1
Qtà. | Prezzo unitario | Est. Prezzo |
---|---|---|
1+ | - | - |
I prezzi sottostanti sono solo di riferimento.