Questo sito web utilizza i cookie. Utilizzando questo sito, acconsenti all'utilizzo dei cookie. Per ulteriori informazioni, dai un'occhiata al nostro politica sulla riservatezza.

SN75176B PDIP (P)-8,SOIC (D)-8,SOP (PS)-8,— (—)-—

Le immagini servono solo come riferimento,

Vedi Specifiche Tecniche

SN75176B +BOM

Differential bus transceiver

Produttore:

TI
ProduttorePart #:

SN75176B
Scheda dati:

SN75176B Scheda dati (PDF)
Number Of Receivers:

1
Number Of Transmitters:

1
Duplex:

Half
Supply Voltage (nom) (V):

5
EDA/CAD Modelli:

Richiedi modelli CAD gratuiti per SN75176B

SN75176B Descrizione generale

The SN65176B and SN75176B differential bus transceivers are designed for bidirectional data communication on multipoint bus transmission lines. They are designed for balanced transmission lines and meet ANSI Standards TIA/EIA-422-B and TIA/EIA-485-A and ITU Recommendations V.11 and X.27.

The SN65176B and SN75176B devices combine a 3-state differential line driver and a differential input line receiver, both of which operate from a single 5-V power supply. The driver and receiver have active-high and active-low enables, respectively, that can be connected together externally to function as a direction control. The driver differential outputs and the receiver differential inputs are connected internally to form differential input/output (I/O) bus ports that are designed to offer minimum loading to the bus when the driver is disabled or V_CC = 0. These ports feature wide positive and negative common-mode voltage ranges, making the device suitable for party-line applications.

The driver is designed for up to 60 mA of sink or source current. The driver features positive and negative current limiting and thermal shutdown for protection from line-fault conditions. Thermal shutdown is designed to occur at a junction temperature of approximately 150°C. The receiver features a minimum input impedance of 12 kΩ, an input sensitivity of ±200 mV, and a typical input hysteresis of 50 mV.

Caratteristiche principali

Bidirectional transceivers
Meet or exceed the requirements of ANSI standards TIA/EIA-422-B and TIA/EIA-485-A and ITU Recommendations V.11 and X.27
Designed for multipoint transmission on long bus lines in noisy environments
3-State driver and receiver outputs
Individual driver and receiver enables
Wide positive and negative input/output bus voltage ranges
± 60-mA Maximum driver output capability
Thermal shutdown protection
Driver positive and negative current limiting
12-kΩ Minimum Receiver Input Impedance
± 200-mV Receiver input sensitivity
50-mV Typical receiver input hysteresis
Operate from single 5-V supply

Specifiche

Number of receivers	1	Number of transmitters	1
Duplex	Half	Supply voltage (nom) (V)	5
Signaling rate (max) (MBits)	10	IEC 61000-4-2 contact (±V)	None
Fault protection (V)	-10 to 15	Common-mode range (V)	-7 to 12
Number of nodes	32	Isolated	No
Supply current (max) (µA)	70000	Rating	Catalog
Operating temperature range (°C)	0 to 70

Politiche di servizio e altro

Relativi al servizio post-vendita e alla liquidazione

Pagamento

Metodo di pagamento

TT/bonifico bancario

PayPal

Western Union

Grammo dei soldi

Per canali di pagamento alternativi, contattaci a:

[email protected]

Spedizione e imballaggio

metodo di spedizione

Fedex

UPS

DHL

NTN

Imballaggio

AVAQ determina e confeziona tutti i dispositivi in base ai requisiti di protezione contro le scariche elettrostatiche (ESD) e il livello di sensibilità all'umidità (MSL)..