Questo sito web utilizza i cookie. Utilizzando questo sito, acconsenti all'utilizzo dei cookie. Per ulteriori informazioni, dai un'occhiata al nostro politica sulla riservatezza.

Le immagini servono solo come riferimento,

Vedi Specifiche Tecniche

SKY68000-31 +BOM

RF Front End CAT0 3GPP IoT RF FEM

Produttore:

Skyworks Solutions, Inc
ProduttorePart #:

SKY68000-31
Scheda dati:

SKY68000-31 Scheda dati (PDF)
Type:

RF Front End
Operating Frequency:

777 MHz to 787 MHz, 1710 MHz to 1755 MHz
Operating Supply Voltage:

2.85 V to 4.5 V
Mounting Style:

SMD/SMT
EDA/CAD Modelli:

Richiedi modelli CAD gratuiti per SKY68000-31

SKY68000-31 Descrizione generale

The SKY68000-31 is a hybrid, dual-band multi-chip RF front-end(RFFE) module supporting cellular LTE-M/NB-IoT(half-duplex system) transceiver platforms. The module integratesthe entire RF front end necessary for an LTE dual-band radiooperating in Band 13 and Band 4 including Rx SAW filters,dual-band PA with bias controller, Tx low-pass harmonic filter,antenna switch, and MIPI RFFE controller.Tx SectionThe PA load-line is optimized for high efficiency whilesimultaneously meeting 3GPP ACLR and emissions maskspecifications with LTE up to 6 RB. An integrated LPF isimplemented to reject the PA and transceiver harmonics while atthe same time minimizing any post PA loss for an optimizedtransmit current consumption. Out-of-band emissionsperformance is emphasized by the design to be compliant forBand 13 and Band 4.Rx SectionReceive SAW filters are integrated in to the module along with thenecessary matching, yielding a 50 Ω single-ended impedance forthe antenna and Rx ports. The SAW filters provide a high level ofrejection to out-of-band interferers protecting the transceiver fromhigh blocking signal levels and to support 3GPP LTE blocking testconformance. The Rx SAW filters cascaded with the low throwcount switch establishes a lower insertion loss and noise figurethan conventional LTE receivers.MIPI RFFE Controller InterfaceThe SKY68000-31 functional operation is fully controllable by asingle MIPI interface which is used to drive the PA in variousoptimized bias modes as well as providing band selection andcontrolling the antenna switch Tx, Rx, and band selection.

Caratteristiche principali

Cost-optimized front end for low-data-rate applications
Low-loss post-PA transmit front end for enhanced transmitter efficiency (compared to LTE-FDD radio front ends)
Dual-band PA supporting APT mode of operation or Vcc fixed supply (≥ 2.85 V)
Integrated low-pass filters for harmonic rejection to comply with spurious emission requirements
Integrated SP4T antenna Tx/Rx switch
Integrated Rx SAW filters for out of band rejection for both Band 13 and Band 4
Optimized to support LTE for 1 to 6 RB
MIPI RFFE control interface, 2.0 compliant
Pin-to-pin compatible with the SKY68001-31 and SKY68011-31
Adaptive biasing scheme for maximum PA efficiencies
Small, low-profile package (4 mm x 5 mm x 0.9 mm) (MSL3 @ 260 °C per JEDEC J-STD-020)
Lead (Pb)-free and RoHS-compliant

Applicazione

M2M
Connected Homes

Specifiche

Product Category:	RF Front End	Type:	RF Front End
Operating Frequency:	777 MHz to 787 MHz, 1710 MHz to 1755 MHz	Operating Supply Voltage:	2.85 V to 4.5 V
Mounting Style:	SMD/SMT	Packaging:	Reel
Development Kit:	SKY68000-31EK1	Moisture Sensitive:	Yes
Product Type:	RF Front End	Series:	SKY68000
Factory Pack Quantity:	4500	Subcategory:	Wireless & RF Integrated Circuits
Technology:	Si

Politiche di servizio e altro

Relativi al servizio post-vendita e alla liquidazione

Pagamento

Metodo di pagamento

TT/bonifico bancario

PayPal

Western Union

Grammo dei soldi

Per canali di pagamento alternativi, contattaci a:

[email protected]

Spedizione e imballaggio

metodo di spedizione

Fedex

UPS

DHL

NTN

Imballaggio

AVAQ determina e confeziona tutti i dispositivi in base ai requisiti di protezione contro le scariche elettrostatiche (ESD) e il livello di sensibilità all'umidità (MSL)..