Questo sito web utilizza i cookie. Utilizzando questo sito, acconsenti all'utilizzo dei cookie. Per ulteriori informazioni, dai un'occhiata al nostro politica sulla riservatezza.

Le immagini servono solo come riferimento,

Vedi Specifiche Tecniche

SJA1000/N1 +BOM

Serial communication interface

Produttore:

NXP
ProduttorePart #:

SJA1000/N1
Scheda dati:

SJA1000/N1 Scheda dati (PDF)
Part Life Cycle Code:

Obsolete
Pin Count:

28
HTS Code:

8542.31.00.01
Address Bus Width:

8
EDA/CAD Modelli:

Richiedi modelli CAD gratuiti per SJA1000/N1

SJA1000/N1 Descrizione generale

GENERAL DESCRIPTIONThe SJA1000 is a stand-alone controller for the Controller Area Network (CAN) used within automotive and general industrial environments. It is the successor of the PCA82C200 CAN controller (BasicCAN) from Philips Semiconductors. Additionally, a new mode of operation is implemented (PeliCAN) which supports the CAN 2.0B protocol specification with several new features.

Caratteristiche principali

Pin compatibility to the PCA82C200 stand-alone CAN controller
Electrical compatibility to the PCA82C200 stand-alone CAN controller
PCA82C200 mode (BasicCAN mode is default)
Extended receive buffer (64-byte FIFO)
CAN 2.0B protocol compatibility (extended frame passive in PCA82C200 compatibility mode)
Supports 11-bit identifier as well as 29-bit identifier
Bit rates up to 1 Mbits/s
PeliCAN mode extensions:
– Error counters with read/write access
– Programmable error warning limit
– Last error code register
– Error interrupt for each CAN-bus error
– Arbitration lost interrupt with detailed bit position
– Single-shot transmission (no re-transmission)
– Listen only mode (no acknowledge, no active error flags)
– Hot plugging support (software driven bit rate detection)
– Acceptance filter extension (4-byte code, 4-byte mask)
– Reception of ‘own’ messages (self reception request)
24 MHz clock frequency
Interfaces to a variety of microprocessors
Programmable CAN output driver configuration
Extended ambient temperature range (−40 to +125 °C).

Specifiche

Source Content uid	SJA1000/N1	Part Life Cycle Code	Obsolete
Pin Count	28	Reach Compliance Code
HTS Code	8542.31.00.01	Address Bus Width	8
Boundary Scan	NO	Clock Frequency-Max	24 MHz
Data Encoding/Decoding Method	NRZ	Data Transfer Rate-Max	0.125 MBps
External Data Bus Width	8	JESD-30 Code	R-PDIP-T28
JESD-609 Code	e3/e4	Length	35.5 mm
Low Power Mode	YES	Number of Serial I/Os	2
Number of Terminals	28	Operating Temperature-Max	125 °C
Operating Temperature-Min	-40 °C	Qualification Status	Not Qualified
Seated Height-Max	5.1 mm	Supply Voltage-Max	5.5 V
Supply Voltage-Min	4.5 V	Supply Voltage-Nom	5 V
Surface Mount	NO	Technology	CMOS
Temperature Grade	AUTOMOTIVE	Terminal Finish	TIN/NICKEL PALLADIUM GOLD
Terminal Form	THROUGH-HOLE	Terminal Pitch	2.54 mm
Terminal Position	DUAL	Width	15.24 mm
uPs/uCs/Peripheral ICs Type	SERIAL IO/COMMUNICATION CONTROLLER, LAN

Politiche di servizio e altro

Relativi al servizio post-vendita e alla liquidazione

Pagamento

Metodo di pagamento

TT/bonifico bancario

PayPal

Western Union

Grammo dei soldi

Per canali di pagamento alternativi, contattaci a:

[email protected]

Spedizione e imballaggio

metodo di spedizione

Fedex

UPS

DHL

NTN

Imballaggio

AVAQ determina e confeziona tutti i dispositivi in base ai requisiti di protezione contro le scariche elettrostatiche (ESD) e il livello di sensibilità all'umidità (MSL)..