Metodo di pagamento
![hsbc](/img/service-policies-hsbc.png)
![paypal](/img/service-policies-paypal.png)
![wu](/img/service-policies-wu.png)
![mg](/img/service-policies-mg.png)
I2C-bus to SPI bridge
TSSOP16Produttore:
ProduttorePart #:
SC18IS606PWJ
Scheda dati:
Number Of Pins:
16
Input:
I2C bus
Buffer Size:
1024
Interface And Input Control:
I2C / I2C,SPI / SPI
EDA/CAD Modelli:
Invia tutte le distinte materiali a
[email protected],
oppure compila il modulo sottostante per un preventivo su SC18IS606PWJ. Risposta garantita entro
12hr.
Compila il breve modulo sottostante e ti forniremo immediatamente il preventivo.
SC18IS606 is designed to serve as an interface between a standard I2C-bus of a microcontroller and an SPI bus. This allows the microcontroller to communicate directly with SPI devices through its I2C-bus. SC18IS606 operates as an I2C-bus targettransmitter or target-receiver and an SPI master. SC18IS606 controls all the SPI busspecific sequences, protocol, and timing. SC18IS606 has its own internal oscillator, and it supports three SPI chip select outputs that may be configured as GPIO when not used as SPI chip select.
• I²C-bus target interface operating up to 400 kHz
• SPI master operating up to 1.8 Mbit/s
• 1024-byte data buffer
• Up to three slave select outputs
• Up to three programmable I/O pins
• Operating supply voltage: 1.71 V to 3.6 V
• Low power mode
• Internal oscillator
• Active LOW interrupt output
• ESD protection exceeds 2000 V HBM per JESD22-A114
• Latch-up testing is done to JEDEC Standard JESD78 that exceeds 100 mA
• Available in 16-pin TSSOP
• Converting I2C-bus to SPI
• Adding additional SPI bus controllers to an existing system
Number of pins | 16 | Input | I2C bus |
Buffer size | 1024 | Security Status | COMPANY PUBLIC |
Interface and Input Control | I2C / I2C,SPI / SPI | Description | I2C-bus to SPI bridge |
Host Interface | I2C,SPI | Diagnostics | I2C,SPI |
Output | SPI |
Relativi al servizio post-vendita e alla liquidazione
Metodo di pagamento
Per canali di pagamento alternativi, contattaci a:
[email protected]metodo di spedizione
AVAQ determina e confeziona tutti i dispositivi in base ai requisiti di protezione contro le scariche elettrostatiche (ESD) e il livello di sensibilità all'umidità (MSL)..
Prodotto 365 giorni
Qualità garantita
Promettiamo di fornire un servizio di garanzia della qualità di 365 giorni per tutti i nostri prodotti.
Qtà. | Prezzo unitario | Est. Prezzo |
---|---|---|
1+ | - | - |
I prezzi sottostanti sono solo di riferimento.
Arrived in a couple of weeks.