Questo sito web utilizza i cookie. Utilizzando questo sito, acconsenti all'utilizzo dei cookie. Per ulteriori informazioni, dai un'occhiata al nostro politica sulla riservatezza.

SAK-XC2224L-20F66V AA +BOM

Microcontroller Units (MCUs/MPUs/SOCs) SAK-XC2224L-20F66V AA VQFN-48-EP(7x7) ROHS

SAK-XC2224L-20F66V AA Descrizione generale

Engineered with an array of analog and digital inputs and outputs, the SAK-XC2224L-20F66V AA offers flexibility in configuring input and output settings to cater to diverse project requirements. Furthermore, its built-in safety features, such as voltage monitoring, watchdog timer, and error correction code (ECC) for memory, provide added assurance of reliable operation even in critical scenarios. The MCU's low power consumption and robust design further underscore its suitability for demanding embedded systems that demand optimal performance and unwavering reliability

Caratteristiche principali

  • For a quick overview or reference, the XC228x’s properties are listed here in a condensed way.
  • High Performance 16-bit CPU with 5-Stage Pipeline
  • – 15 ns Instruction Cycle Time at 66 MHz CPU Clock (Single-Cycle Execution)
  • – 1-Cycle 32-bit Addition and Subtraction with 40-bit Result
  • – 1-Cycle Multiplication (16 × 16 bit)
  • – 1-Cycle Multiply-and-Accumulate (MAC) Instructions
  • – Background Division (32 / 16 bit) in 21 Cycles
  • – Enhanced Boolean Bit Manipulation Facilities
  • – Zero-Cycle Jump Execution
  • – Additional Instructions to Support HLL and Operating Systems
  • – Register-Based Design with Multiple Variable Register Banks
  • – Fast Context Switching Support with Two Additional Local Register Banks
  • – 16 Mbytes Total Linear Address Space for Code and Data
  • – 1024 Bytes On-Chip Special Function Register Area (C166 Family Compatible)
  • 16-Priority-Level Interrupt System with up to 87 Sources, Selectable External Inputs for Interrupt Generation and Wake-Up, Sample-Rate down to 15 ns
  • 8-Channel Interrupt-Driven Single-Cycle Data Transfer Facilities via Peripheral Event Controller (PEC), 24-Bit Pointers Cover Total Address Space
  • Clock Generation from Internal or External Clock Sources, via on-chip PLL or via Prescaler
  • On-Chip Memory Modules
  • – 1 Kbyte On-Chip Stand-By RAM (SBRAM)
  • – 2 Kbytes On-Chip Dual-Port RAM (DPRAM)
  • – 16 Kbytes On-Chip Data SRAM (DSRAM)
  • – Upt to 64 Kbytes On-Chip Program/Data SRAM (PSRAM)
  • – Up to 768 Kbytes On-Chip Program Memory (Flash Memory)
  • On-Chip Peripheral Modules
  • – Two Synchronizable A/D Converters with a total of 24 Channels, 10-bit Resolution, Conversion Time down to 1.2 µs, Optional Data Preprocessing (Data Reduction, Range Check)
  • – 16-Channel General Purpose Capture/Compare Unit (CAPCOM2)
  • – Up to four Capture/Compare Units for flexible PWM Signal Generation (CCU6x)
  • – Multi-Functional General Purpose Timer Unit with 5 Timers
  • – Six Serial Interface Channels to be used as UART, LIN, High-Speed Synchronous Channel (SPI/QSPI), IIC Bus Interface (10-bit addressing, 400 kbit/s), IIS Interface
  • – On-Chip MultiCAN Interface (Rev. 2.0B active) with 128 Message Objects
  • (Full CAN/Basic CAN) on up to 5 CAN Nodes and Gateway Functionality
  • – On-Chip Real Time Clock
  • Up to 12 Mbytes External Address Space for Code and Data
  • – Programmable External Bus Characteristics for Different Address Ranges
  • – Multiplexed or Demultiplexed External Address/Data Buses
  • – Selectable Address Bus Width
  • – 16-Bit or 8-Bit Data Bus Width
  • – Five Programmable Chip-Select Signals
  • – Hold- and Hold-Acknowledge Bus Arbitration Support
  • Single Power Supply from 3.0 V to 5.5 V
  • Power Reduction Modes with Flexible Power Management
  • Programmable Watchdog Timer and Oscillator Watchdog
  • Up to 118 General Purpose I/O Lines
  • On-Chip Bootstrap Loader
  • Supported by a Large Range of Development Tools like C-Compilers, Macro Assembler Packages, Emulators, Evaluation Boards, HLL-Debuggers, Simulators, Logic Analyzer Disassemblers, Programming Boards
  • On-Chip Debug Support via JTAG Interface
  • 144-Pin Green LQFP Package, 0.5 mm (19.7 mil) pitch

Specifiche

Series XC22xxL Programmabe Not Verified
Core Processor C166SV2 Core Size 16/32-Bit
Speed 66MHz Connectivity CANbus, I²C, LINbus, SPI, SSC, UART/USART, USI
Peripherals I²S, POR, PWM, WDT Number of I/O 33
Program Memory Size 160KB (160K x 8) Program Memory Type FLASH
RAM Size 10K x 8 Voltage - Supply (Vcc/Vdd) 3V ~ 5.5V
Data Converters A/D 10x12b Oscillator Type Internal
Operating Temperature -40°C ~ 125°C (TA) Mounting Type Surface Mount
Base Product Number XC2224

Politiche di servizio e altro

Relativi al servizio post-vendita e alla liquidazione

payment Pagamento

Metodo di pagamento

hsbc
TT/bonifico bancario
paypal
PayPal
wu
Western Union
mg
Grammo dei soldi

Per canali di pagamento alternativi, contattaci a:

[email protected]
spedizione Spedizione e imballaggio

metodo di spedizione

fedex
Fedex
ups
UPS
dhl
DHL
tnt
NTN
Imballaggio

AVAQ determina e confeziona tutti i dispositivi in base ai requisiti di protezione contro le scariche elettrostatiche (ESD) e il livello di sensibilità all'umidità (MSL)..

Garanzia Garanzia

Promettiamo di fornire un servizio di garanzia della qualità di 365 giorni per tutti i nostri prodotti.

Recensioni

You need to log in to reply. Registrazione | Iscrizione