Metodo di pagamento
![hsbc](/img/service-policies-hsbc.png)
![paypal](/img/service-policies-paypal.png)
![wu](/img/service-policies-wu.png)
![mg](/img/service-policies-mg.png)
-pin package offers robust connectivity featur
QFN EPProduttore:
Realtek
ProduttorePart #:
RTL8211FI-CG
Scheda dati:
ECCN (US):
EAR99
HTS:
8542.39.00.01
Number Of Channels Per Chip:
1
Maximum Data Rate:
1Gbps
EDA/CAD Modelli:
Compila il breve modulo sottostante e ti forniremo immediatamente il preventivo.
The Realtek RTL8211F-CG/RTL8211FI-CG is a highly integrated Ethernet transceiver that is compatible with 10Base-T, 100Base-TX, and 1000Base-T IEEE 802.3 standards. It provides all the necessary physical layer functions to transmit and receive Ethernet packets over CAT.5 UTP cable. The RTL8211FI-CG is manufactured to industrial grade standards.
The RTL8211F(I)-CG uses state-of-the-art DSP technology and an Analog Front End (AFE) to enable high-speed data transmission and reception over UTP cable. Functions such as Crossover Detection & Auto-Correction, polarity correction, adaptive equalization, cross-talk cancellation, echo cancellation, timing recovery, and error correction are implemented in the RTL8211F(I)-CG to provide robust transmission and reception capabilities at 10Mbps, 100Mbps, or 1000Mbps.
Data transfer between MAC and PHY is via the Reduced Gigabit Media Independent Interface (RGMII) for 1000Base-T, 10Base-T, and 100Base-TX. The RTL8211F(I)-CG supports various RGMII signaling voltages, including 3.3, 2.5, 1.8, and 1.5V.
The RTL8211F(I)-CG incorporates a state-of-the-art switching regulator that requires a well-designed PCB layout in order to achieve good power efficiency and lower the output voltage ripple and input overshoot.
In addition, the RTL8211F(I)-CG can be used in any embedded system with an Ethernet MAC that needs a UTP physical connection.
ECCN (US) | EAR99 | Part Status | Active |
HTS | 8542.39.00.01 | Number of Channels per Chip | 1 |
Maximum Data Rate | 1Gbps | PHY Line Side Interface | No |
JTAG Support | No | Integrated CDR | No |
Standard Supported | 10BASE-T|100BASE-TX | Minimum Operating Supply Voltage (V) | 2.97 |
Typical Operating Supply Voltage (V) | 3.3 | Maximum Operating Supply Voltage (V) | 3.63 |
Power Supply Type | Analog|Digital | Minimum Operating Temperature (°C) | -40 |
Maximum Operating Temperature (°C) | 85 | Mounting | Surface Mount |
PCB changed | 40 | Pin Count | 40 |
Lead Shape | No Lead |
Relativi al servizio post-vendita e alla liquidazione
Metodo di pagamento
Per canali di pagamento alternativi, contattaci a:
[email protected]metodo di spedizione
AVAQ determina e confeziona tutti i dispositivi in base ai requisiti di protezione contro le scariche elettrostatiche (ESD) e il livello di sensibilità all'umidità (MSL)..
Prodotto 365 giorni
Qualità garantita
Promettiamo di fornire un servizio di garanzia della qualità di 365 giorni per tutti i nostri prodotti.
Qtà. | Prezzo unitario | Est. Prezzo |
---|---|---|
1+ | - | - |
I prezzi sottostanti sono solo di riferimento.
Tutte le distinte materiali (BOM) possono essere inviate via e-mail a
[email protected],
oppure compila il modulo sottostante per richiedere un preventivo per RTL8211FI-CG, preventivi garantiti entro
12 ore.
CP2102
Silicon Laboratories
Integrate seamlessly into your design with our reliable interface I
MAX232
Texas Instruments
This V device features bps data transfer rates and robust ESD protection
W5500
Wiznet
With its comprehensive set of protocols and interfaces, this IC streamlines network development and deploymen
TJA1050
Nxp
Robust and reliable high-speed communication solution for demanding application
RTL2832U
Realtek
High-performance demodulation for DVB-T signals, plug-and-play via US