Metodo di pagamento
PTH03050WAD +BOM
Non-Isolated PoL Module DC DC Converter 1 Output 0.8 ~ 2.5V 6A 2.95V - 3.65V Input
DIP6-
Produttore:
-
ProduttorePart #:
PTH03050WAD
-
Scheda dati:
-
Series:
PTH03050W (15W)
-
Type:
Non-Isolated PoL Module
-
Number Of Outputs:
1
-
Voltage - Input (Min):
2.95V
-
EDA/CAD Modelli:
Disponibilità: 7618 PZ
Compila il breve modulo sottostante e ti forniremo immediatamente il preventivo.
PTH03050WAD Descrizione generale
Non-Isolated PoL Module DC DC Converter 1 Output 0.8 ~ 2.5V 6A 2.95V - 3.65V Input
Caratteristiche principali
- Up to 6-A Output Current
- 3.3-V Input Voltage
- Wide-Output Voltage Adjust (0.8 V to 2.5 V)
- Efficiencies up to 94 %
- 103 W/in3 Power Density
- On/Off Inhibit
- Pre-Bias Startup
- Under-Voltage Lockout
- Operating Temp: –40 to +85 °C
- Auto-Track? Sequencing
- Output Over-Current Protection (Non-Latching, Auto-Reset)
- IPC Lead Free 2
- Safety Agency Approvals: UL 1950, CSA 22.2 950, EN60950 VDE (Pending)
- Point-of-Load Alliance (POLA) Compatible
The PTH03050 is one of the smallest non-isolated power modules from Texas Instruments that features Auto-Track?. Auto-Track simplifies supply voltage sequencing in power systems by enabling modules to track each other, or any other external voltage, during power up and power down.
Although small in size (0.87 in × 0.5 in), these modules are rated for up to 6 A of output current, and are an ideal choice in applications where space, performance, and a power-up sequencing capability are important attributes.
The product provides high-performance step-down conversion from a 3.3-V input bus voltage. The output voltage of the PTH03050W can be set to any voltage over the range, 0.8 V to 2.5 V, using a single resistor.
Other operating features include an on/off inhibit, output voltage adjust (trim), and output over-current protection. For high efficiency these parts employ a synchronous rectifier output stage, but a pre-bias hold-off capability ensures that the output will not sink current during startup.
Target applications include telecom, industrial, and general purpose circuits, including low-power dual-voltage systems that use a DSP, microprocessor, ASIC, or FPGA.
Package options include both throughhole and surface mount configurations.
Specifiche
Category | Power Supplies - Board MountDC DC Converters | Series | PTH03050W (15W) |
Type | Non-Isolated PoL Module | Number of Outputs | 1 |
Voltage - Input (Min) | 2.95V | Voltage - Input (Max) | 3.65V |
Voltage - Output 1 | 0.8 ~ 2.5V | Voltage - Output 2 | - |
Voltage - Output 3 | - | Current - Output (Max) | 6A |
Power (Watts) | 15 W | Applications | ITE (Commercial) |
Features | Remote On/Off, SCP, UVLO | Operating Temperature | -40°C ~ 85°C |
Efficiency | 94% | Mounting Type | Through Hole |
Size / Dimension | 0.87" L x 0.50" W x 0.34" H (22.1mm x 12.7mm x 8.6mm) | Base Product Number | PTH03050 |
Politiche di servizio e altro
Relativi al servizio post-vendita e alla liquidazione
Per canali di pagamento alternativi, contattaci a:
[email protected]metodo di spedizione
AVAQ determina e confeziona tutti i dispositivi in base ai requisiti di protezione contro le scariche elettrostatiche (ESD) e il livello di sensibilità all'umidità (MSL)..
Prodotto 365 giorni
Qualità garantita
Promettiamo di fornire un servizio di garanzia della qualità di 365 giorni per tutti i nostri prodotti.
In Stock: 7.618
Minimum Order: 1
Qtà. | Prezzo unitario | Est. Prezzo |
---|---|---|
1+ | - | - |
I prezzi sottostanti sono solo di riferimento.
Tutte le distinte materiali (BOM) possono essere inviate via e-mail a [email protected], oppure compila il modulo sottostante per richiedere un preventivo per PTH03050WAD, preventivi garantiti entro 12 ore.