Metodo di pagamento
![hsbc](/img/service-policies-hsbc.png)
![paypal](/img/service-policies-paypal.png)
![wu](/img/service-policies-wu.png)
![mg](/img/service-policies-mg.png)
Ic,Operational Amplifier,Single,Bipolar/Jfet,Dip,8Pin,Ceramic
8-CERDIPProduttore:
ProduttorePart #:
OP42AZ
Scheda dati:
Pbfree Code:
No
Part Life Cycle Code:
Obsolete
Pin Count:
8
ECCN Code:
EAR99
EDA/CAD Modelli:
Invia tutte le distinte materiali a
[email protected],
oppure compila il modulo sottostante per un preventivo su OP42AZ. Risposta garantita entro
12hr.
Compila il breve modulo sottostante e ti forniremo immediatamente il preventivo.
The OP-42 is a fast precision JFET-input operational amplifier. Similar in speed to the OP-17, the OP-42 offers a symmetric 58V/µs slew rate and is internally compensated for unity-gain operation. OP-42 speed is achieved with a supply current of less than 6mA. Unity gain stability, a wide full-power bandwidth of 900kHz, and a fast settling-time of 800ns to 0.01% make the OP-42 an ideal output amplifier for fast digital-to-analog converters. Equal attention was given to both speed and precision in the OP-42 design. Its tight 750µV maximum input offset voltage combined with well-controlled drift of less than 10µV/%C eliminates the need for external nulling in many circuits. The common-mode rejection of the 88dB minimum over a ±11 V input voltage range is exceptional for a high-speed amplifier. High CMR combined with a minimum 500V/mV gain into 10k(ohm) load ensure excellent linearity in both noninverting and inverting gain configurations. The low input bias and offset currents provided by the JFET input stage suit the OP-42 for use in high-speed sample and hold circuits, peak detectors, and log amplifiers. Excellent radiation hardness characteristics make the OP-42 ideal for military and aerospace applications. The OP-42 conforms to the standard 741 pinout with nulling to V-. The OP-42 upgrades the performance of circuits using the AD544, AD611, AD711, and LF400 by direct replacement. In circuits without nulling, the OP-42 offers an upgrade for designs using the OP-16, OP-17, LT1022, LT1056, and HA2510.
Source Content uid | OP42AZ | Pbfree Code | No |
Part Life Cycle Code | Obsolete | Pin Count | 8 |
Reach Compliance Code | ECCN Code | EAR99 | |
HTS Code | 8542.33.00.01 | Amplifier Type | OPERATIONAL AMPLIFIER |
Architecture | VOLTAGE-FEEDBACK | Average Bias Current-Max (IIB) | 0.02 µA |
Bias Current-Max (IIB) @25C | 0.0002 µA | Common-mode Reject Ratio-Min | 86 dB |
Common-mode Reject Ratio-Nom | 94 dB | Frequency Compensation | YES |
Input Offset Current-Max (IIO) | 0.00004 µA | Input Offset Voltage-Max | 2000 µV |
JESD-30 Code | R-GDIP-T8 | JESD-609 Code | e0 |
Low-Bias | YES | Low-Offset | NO |
Neg Supply Voltage Limit-Max | -20 V | Neg Supply Voltage-Nom (Vsup) | -15 V |
Number of Functions | 1 | Number of Terminals | 8 |
Operating Temperature-Max | 125 °C | Operating Temperature-Min | -55 °C |
Qualification Status | Not Qualified | Seated Height-Max | 5.08 mm |
Slew Rate-Min | 45 V/us | Slew Rate-Nom | 52 V/us |
Supply Current-Max | 6 mA | Supply Voltage Limit-Max | 20 V |
Supply Voltage-Nom (Vsup) | 15 V | Surface Mount | NO |
Technology | BIPOLAR | Temperature Grade | MILITARY |
Terminal Finish | TIN LEAD | Terminal Form | THROUGH-HOLE |
Terminal Pitch | 2.54 mm | Terminal Position | DUAL |
Unity Gain BW-Nom | 10000 | Voltage Gain-Min | 100000 |
Width | 7.62 mm |
Relativi al servizio post-vendita e alla liquidazione
Metodo di pagamento
Per canali di pagamento alternativi, contattaci a:
[email protected]metodo di spedizione
AVAQ determina e confeziona tutti i dispositivi in base ai requisiti di protezione contro le scariche elettrostatiche (ESD) e il livello di sensibilità all'umidità (MSL)..
Prodotto 365 giorni
Qualità garantita
Promettiamo di fornire un servizio di garanzia della qualità di 365 giorni per tutti i nostri prodotti.
Qtà. | Prezzo unitario | Est. Prezzo |
---|---|---|
1+ | - | - |
I prezzi sottostanti sono solo di riferimento.