Questo sito web utilizza i cookie. Utilizzando questo sito, acconsenti all'utilizzo dei cookie. Per ulteriori informazioni, dai un'occhiata al nostro politica sulla riservatezza.

Le immagini servono solo come riferimento,

Vedi Specifiche Tecniche

NE555D +BOM

Single Precision Timer

Produttore:

Texas Instruments, Inc
ProduttorePart #:

NE555D
Scheda dati:

NE555D Scheda dati (PDF)
Type:

555 Type, Timer/Oscillator (Single)
Frequency:

100kHz
Voltage - Supply:

4.5V ~ 16V
Current - Supply:

10 mA
EDA/CAD Modelli:

Richiedi modelli CAD gratuiti per NE555D

E-mail: [email protected]

Skype: live:.cid.ab6b29428937b76

tel: +852 95804164

NE555D Descrizione generale

The NE555D is a monolithic timing IC designed to generate accurate and stable time delays, pulses, and oscillations. It is part of the NE555 series of timer ICs, which are widely recognized and used in various electronic circuits for timing and control purposes.

These devices are precision timing circuits capable of producing accurate time delays or oscillation. In the time-delay or mono-stable mode of operation, the timed interval is controlled by a single external resistor and capacitor network. In the a-stable mode of operation, the frequency and duty cycle can be controlled independently with two external resistors and a single external capacitor.

The threshold and trigger levels normally are two-thirds and one-third, respectively, of VCC. These levels can be altered by use of the control-voltage terminal. When the trigger input falls below the trigger level, the flip-flop is set, and the output goes high. If the trigger input is above the trigger level and the threshold input is above the threshold level, the flip-flop is reset and the output is low. The reset (RESET) input can override all other inputs and can be used to initiate a new timing cycle. When RESET goes low, the flip-flop is reset, and the output goes low. When the output is low, a low-impedance path is provided between discharge (DISCH) and ground.

The output circuit is capable of sinking or sourcing current up to 200 mA. Operation is specified for supplies of 5 V to 15 V. With a 5-V supply, output levels are compatible with TTL inputs.

Caratteristiche principali

Timing From Microseconds to Hours
Astable or Monostable Operation
Adjustable Duty Cycle
TTL-Compatible Output Can Sink or SourceUp to 200 mA
On Products Compliant to MIL-PRF-38535,All Parameters Are Tested Unless Otherwise Noted. On All Other Products, Production Processing Does Not Necessarily IncludeTesting of All Parameters.

Applicazione

Pulse Generation
Timing and Delay Circuits
Oscillators
LED Flashers
Control Timers
Multivibrators
Frequency Counters
Pulse Generators
Automotive Electronics

Specifiche

Category	Integrated Circuits (ICs)Clock/TimingProgrammable Timers and Oscillators	Series	-
Type	555 Type, Timer/Oscillator (Single)	Count	-
Frequency	100kHz	Voltage - Supply	4.5V ~ 16V
Current - Supply	10 mA	Operating Temperature	0°C ~ 70°C
Mounting Type	Surface Mount	Base Product Number	NE555
Product Category	Timers & Support Products	Number of Internal Timers	1 Timer
Supply Voltage - Max	16 V	Supply Voltage - Min	4.5 V
Minimum Operating Temperature	0 C	Maximum Operating Temperature	+ 70 C
Mounting Style	SMD/SMT	Height	1.58 mm
High Level Output Current	200 mA	Length	4.9 mm
Low Level Output Current	- 200 mA	Operating Supply Current	2 mA
Product Type	Timers & Support Products	Factory Pack Quantity	75
Subcategory	Clock & Timer ICs	Width	3.91 mm
Unit Weight	0.002561 oz

Politiche di servizio e altro

Relativi al servizio post-vendita e alla liquidazione

Pagamento

Metodo di pagamento

TT/bonifico bancario

PayPal

Western Union

Grammo dei soldi

Per canali di pagamento alternativi, contattaci a:

[email protected]

Spedizione e imballaggio

metodo di spedizione

Fedex

UPS

DHL

NTN

Imballaggio

AVAQ determina e confeziona tutti i dispositivi in base ai requisiti di protezione contro le scariche elettrostatiche (ESD) e il livello di sensibilità all'umidità (MSL)..