Questo sito web utilizza i cookie. Utilizzando questo sito, acconsenti all'utilizzo dei cookie. Per ulteriori informazioni, dai un'occhiata al nostro politica sulla riservatezza.

Le immagini servono solo come riferimento,

Vedi Specifiche Tecniche

MSC8156VT1000B +BOM

Advanced microcontroller for efficient execution of complex algorithms and data processing tasks

Produttore:

NXP Semiconductor
ProduttorePart #:

MSC8156VT1000B
Scheda dati:

MSC8156VT1000B Scheda dati (PDF)
Product:

DSPs
Series:

MSC8156E
Tradename:

StarCore
Mounting Style:

SMD/SMT
EDA/CAD Modelli:

Richiedi modelli CAD gratuiti per MSC8156VT1000B

MSC8156VT1000B Descrizione generale

The MSC8156 is based on the industry's highest-performance DSP core built on StarCore® technology and designed for the advanced processing requirements and capabilities of today's high-performance applications for the wireless broadband, medical imaging, aerospace, defense and advanced test and measurement markets. It delivers industry-leading performance and power savings, leveraging 45 nm process technology in a highly integrated system-on-chip (SoC) to provide performance equivalent to a 6 GHz single-core device. The MSC8156 helps equipment manufacturers create end products and services that integrate more functionality in a smaller hardware footprint.

The MSC8156 DSP delivers a high level of performance and integration, combining six fully programmable enhanced SC3850 DSP cores, each running at up to 1 GHz. Developed by NXP® and integrated on-chip, the MAPLE-B accelerator supports hardware acceleration for Turbo and Viterbi channel decoding and for DFT/iDFT and FFT/iFFT algorithms. A high-performance internal RISC-based QUICC Engine® subsystem supports multiple networking protocols to guarantee reliable data transport over packet networks while significantly offloading processing from the DSP cores.

The MSC8156 embeds large internal memory and supports a variety of advanced high-speed interface types, including two RapidIO® interfaces, two gigabit Ethernet interfaces for network communications, a PCI Express® controller, two DDR controllers for high-speed, industry standard memory interface and four multi-channel TDM interfaces. The MSC8156 allows a high degree of scalability through pin compatibility with all MSC825x and MSC815x DSP devices.

Caratteristiche principali

Six StarCore® DSP SC3850 core subsystems each with:
SC3850 DSP core at up to 1 GHz
512 KB unified L2 cache/M2 memory
32 KB I-cache, 32 KB D-cache
Fully programmable 1056 KB M3 shared memory (SRAM)
MAPLE-B - highly flexible programmable Turbo and Viterbi decoder supports configurable decoding parameters. It can perform up to 200 Mbps of Turbo decoding (six iterations) or up to 115 Mbps of K = 9 (zero tail) Viterbi decoding
Two DDR 2/3 64-bit SDRAM interfaces at up to 800 MHz data rate
Chip-Level Arbitration and Switching Fabric, non-blocking, fully pipelined, low latency
High-speed interconnects:
Dual 4x/1x Serial RapidIO at 1.25/2.5/3.125 Gbaud
PCI Express 4x/1x
Two SGMII
Dual RISC QUICC Engine® supporting:
RGMII gigabit Ethernet ports
Serial peripheral interface (SPI)
TDM highway 1024 ch., 400 Mbps, divided into four ports of 256
DMA engine 16 bi-directional channels
Other peripheral interfaces:
UART
I²C
32 GPIO
16 timers
Technology
Process: 45 nm SOI
Voltage: 1-volt core, 2.5, 1.8/1.5-volt I/O
Package: FC-BPGA (29x29) 1 mm pitch, RoHS
This product is included in NXP®.s product longevity program, with assured supply for a minimum of 10 years after launch

Specifiche

Product Category:	Digital Signal Processors & Controllers - DSP, DSC	Product:	DSPs
Series:	MSC8156E	Tradename:	StarCore
Mounting Style:	SMD/SMT	Core:	SC3850
Number of Cores:	6 Core	Maximum Clock Frequency:	1 GHz
L1 Cache Instruction Memory:	6 x 32 kB	L1 Cache Data Memory:	6 x 32 kB
Program Memory Size:	-	Data RAM Size:	-
Operating Supply Voltage:	1 V	Minimum Operating Temperature:	0 C
Maximum Operating Temperature:	+ 90 C	Packaging:	Tray
Data Bus Width:	32 bit, 64 bit	Data ROM Size:	96 kB
I/O Voltage:	2.5 V	Interface Type:	I2C, JTAG, SPI
Moisture Sensitive:	Yes	Number of Timers/Counters:	18 Timer
Processor Series:	StarCore	Product Type:	DSP - Digital Signal Processors & Controllers
Factory Pack Quantity:	1	Subcategory:	Embedded Processors & Controllers
Supply Voltage - Max:	1.05 V	Supply Voltage - Min:	970 mV
Watchdog Timers:	Watchdog Timer	Unit Weight:	0.393340 oz

Politiche di servizio e altro

Relativi al servizio post-vendita e alla liquidazione

Pagamento

Metodo di pagamento

TT/bonifico bancario

PayPal

Western Union

Grammo dei soldi

Per canali di pagamento alternativi, contattaci a:

[email protected]

Spedizione e imballaggio

metodo di spedizione

Fedex

UPS

DHL

NTN

Imballaggio

AVAQ determina e confeziona tutti i dispositivi in base ai requisiti di protezione contro le scariche elettrostatiche (ESD) e il livello di sensibilità all'umidità (MSL)..