Questo sito web utilizza i cookie. Utilizzando questo sito, acconsenti all'utilizzo dei cookie. Per ulteriori informazioni, dai un'occhiata al nostro politica sulla riservatezza.

Le immagini servono solo come riferimento,

Vedi Specifiche Tecniche

MMC2107CFCAG33 +BOM

MMC2107CFCAG33 is a microcontroller with 128KFLASH and 8KRAM storage capacity

Produttore:

NXP
ProduttorePart #:

MMC2107CFCAG33
Scheda dati:

MMC2107CFCAG33 Scheda dati (PDF)
Series:

MMC2107
Mounting Style:

SMD/SMT
Core:

M-CORE
Program Memory Size:

128 kB
EDA/CAD Modelli:

Richiedi modelli CAD gratuiti per MMC2107CFCAG33

E-mail: [email protected]

Skype: live:.cid.ab6b29428937b76

tel: +852 95804164

MMC2107CFCAG33 Descrizione generale

Furthermore, the MMC2107CFCAG33 is designed to withstand extreme conditions, operating reliably over a wide temperature range. This resilience makes it an ideal choice for automotive applications where durability is essential. From high-performance computing to robust security features, this MCU offers a comprehensive solution for automotive design challenges, setting new standards for reliability and performance in the industry

Caratteristiche principali

Features of the MMC2107 include:
MCORE M210 integer processor:
– 32-bit reduced instruction set computer (RISC) architecture
– Low power and high performance
OnCE™ debug support
On-chip 128-Kbyte FLASH:
– Motorola’s one transistor, CDR MoneT(1) FLASH bit cell
– Page mode (2111) read access
– External VPP required for programming
– 16-K block size
On-chip, 8-Kbyte static random-access memory (SRAM):
– One clock per access (including bytes, half-words, and words)
– Byte, half-word (16 bits), and word (32 bits) read/write accesses
– Standby power supply support
Serial peripheral interface (SPI):
– Master mode and slave mode
– Wired-OR mode
– Slave select output
– Mode fault error flag with CPU interrupt capability
– Double-buffered operation
– Serial clock with programmable polarity and phase
– Control of SPI operation during wait mode
– Reduced drive control
Two serial communications interfaces (SCI):
– Full-duplex operation
– Standard mark/space non-return-to-zero (NRZ) format
– 13-bit baud rate selection
– Programmable 8-bit or 9-bit data format
– Separately enabled transmitter and receiver
– Separate receiver and transmitter CPU interrupt requests
– Programmable transmitter output polarity
– Two receiver wakeup methods (idle line and address mark)
– Interrupt-driven operation with eight flags
– Receiver framing error detection
– Hardware parity checking
– 1/16 bit-time noise detection
– General-purpose input/output port
Two timers:
– Four 16-bit input capture/output compare channels
– 16-bit architecture
– 16-bit pulse accumulator
– Pulse widths variable from microseconds to seconds
– Prescaler
– Toggle-on-overflow feature for pulse-width modulator (PWM) generation
– Timer port pullups enabled on reset
Queued analog-to-digital converter (QADC):
– Eight analog input channels
– 10-bit resolution ±2 counts accuracy
– Minimum 7 µs conversion time
– Internal sample and hold
– Programmable input sample time for various source impedances
– Two conversion command queues with a total of 64 entries
– Subqueues possible using pause mechanism
– Queue complete and pause software interrupts available on both queues
– Queue pointers indicate current location for each queue
– Automated queue modes initiated by:
External edge trigger and gated trigger
Periodic/interval timer, within queued analog-to-digital converter (QADC) module {queue1 and queue2}
Software command
– Single-scan or continuous-scan of queues
– Output data readable in three formats:
Right-justified unsigned
Left-justified signed
Left-justified unsigned
– Unused analog channels can be used as digital input/output (I/O)
– Minimum pin set configuration implemented (Continue)

Specifiche

Product Category	32-bit Microcontrollers - MCU	Series	MMC2107
Mounting Style	SMD/SMT	Core	M-CORE
Program Memory Size	128 kB	Data RAM Size	8 kB
Data Bus Width	32 bit	Maximum Clock Frequency	33 MHz
Number of I/Os	72 I/O	Supply Voltage - Min	2.7 V
Supply Voltage - Max	3.6 V	Minimum Operating Temperature	- 40 C
Maximum Operating Temperature	+ 85 C	Packaging	[ "Tray" ]
Data ROM Size	128 kB	Data ROM Type	Flash/EEPROM
Height	1.4 mm	Interface Type	SCI, SPI
Length	20 mm	Moisture Sensitive	Yes
Number of Timers/Counters	2 Timer	Processor Series	MMC2107
Product Type	32-bit Microcontrollers - MCU	Program Memory Type	EEPROM, Flash
Factory Pack Quantity	300	Subcategory	Microcontrollers - MCU
Width	20 mm	Unit Weight	0.046530 oz

Politiche di servizio e altro

Relativi al servizio post-vendita e alla liquidazione

Pagamento

Metodo di pagamento

TT/bonifico bancario

PayPal

Western Union

Grammo dei soldi

Per canali di pagamento alternativi, contattaci a:

[email protected]

Spedizione e imballaggio

metodo di spedizione

Fedex

UPS

DHL

NTN

Imballaggio

AVAQ determina e confeziona tutti i dispositivi in base ai requisiti di protezione contro le scariche elettrostatiche (ESD) e il livello di sensibilità all'umidità (MSL)..