Metodo di pagamento
![hsbc](/img/service-policies-hsbc.png)
![paypal](/img/service-policies-paypal.png)
![wu](/img/service-policies-wu.png)
![mg](/img/service-policies-mg.png)
IC MCU 16BIT 128KB FLASH 100LQFP
QFPProduttore:
MB
ProduttorePart #:
MB90F428
Scheda dati:
Series:
F²MC-16LX MB90425G (A)
Programmable:
Not Verified
Core Processor:
F²MC-16LX
Core Size:
16-Bit
EDA/CAD Modelli:
Invia tutte le distinte materiali a
[email protected],
oppure compila il modulo sottostante per un preventivo su MB90F428. Risposta garantita entro
12hr.
Compila il breve modulo sottostante e ti forniremo immediatamente il preventivo.
■ DESCRIPTIONSThe FUJITSU MB90420G/5G (A) Series is a 16-bit general purpose high-capacity microcontroller designed for vehicle meter control applications etc.The instruction set retains the same AT architecture as the FUJITSU original F2MC-8L and F2MC-16L series, with further refinements including high-level language instructions, expanded addressing mode, enhanced (signed) multipler-divider computation and bit processing.In addition, A 32-bit accumulator is built in to enable long word processing.■ FEATURES• 16-bit input capture (4 channels) Detects rising, falling, or both edges. 16-bit capture register × 4 Pin input edge detection latches the 16-bit free-run timer counter value, and generates an interrupt request.• 16-bit reload timer (2 channels) 16-bit reload timer operation (select toggle output or one-shot output) Event count function selection provided• Clock timer (main clock) Operates directly from oscillator clock. Compensates for oscillator deviation Read/write enabled second/minute/hour register Signal interrupt• 16-bit PPG (3 channels) Output pins (3) , external trigger input pin (1) Output clock frequencies : fCP, fCP/22, fCP/24, fCP/26• Delay interrupt Generates interrupt for task switching. Interruptions to CPU can be generated/deleted by software setting.• External interrupts (8 channels) 8-channel independent operation Interrupt source setting available : “L” to “H” edge/ “H” to “L” edge/ “L” level/ “H” level.• A/D converter 10-bit or 8-bit resolution × 8 channels (input multiplexed) Conversion time : 6.13 µs or less (at fCP = 16 MHz) External trigger startup available (P50/INT0/ADTG) Internal timer startup available (16-bit reload timer 1)• UART (2 channels) Full duplex double buffer type Supports asynchronous/synchronous transfer (with start/stop bits) Internal timer can be selected as clock (16-bit reload timer 0) Asynchronous : 4808 bps, 5208 bps, 9615 bps, 10417 bps, 19230 bps, 38460 bps, 62500 bps, 500000 bps Synchronous : 500 Kbps, 1Mbps, 2Mbps (at fCP = 16 MHz)• CAN interface *1 Conforms to CAN specifications version 2.0 Part A and B. Automatic resend in case of error. Automatic transfer in response to remote frame. 16 prioritized message buffers for data and messages for data and ID Multiple message support Receiving filter has flexible configuration : All bit compare/all bit mask/two partial bit masks Supports up to 1 Mbps CAN WAKEUP function (connects RX internally to INT0)• LCD controller/driver (1 channel) Segment driver and command driver with direct LCD panel (display) drive capability• Low voltage/Program Looping detect reset *2 Automatic reset when low voltage is detected Program Looping detection function• Stepping motor controller (4 channels) High current output for all channels × 4 Synchronized 8/10-bit PWM for all channels × 2• Sound generator 8-bit PWM signal mixed with tone frequency from 8-bit reload counter. PWM frequencies : 62.5 kHz, 31.2 kHz, 15.6 kHz, 7.8 kHz (at fCP = 16MHz) Tone frequencies : 1/2 PWM frequency, divided by (reload frequency +1)
Category | Integrated Circuits (ICs)EmbeddedMicrocontrollers | Series | F²MC-16LX MB90425G (A) |
Programmable | Not Verified | Core Processor | F²MC-16LX |
Core Size | 16-Bit | Speed | 16MHz |
Connectivity | CANbus, UART/USART | Peripherals | LCD, POR, PWM, WDT |
Number of I/O | 58 | Program Memory Size | 128KB (128K x 8) |
Program Memory Type | FLASH | EEPROM Size | - |
RAM Size | 6K x 8 | Voltage - Supply (Vcc/Vdd) | 4.5V ~ 5.5V |
Data Converters | A/D 8x8/10b | Oscillator Type | External |
Operating Temperature | -40°C ~ 105°C (TA) | Mounting Type | Surface Mount |
Base Product Number | MB90F428 |
Relativi al servizio post-vendita e alla liquidazione
Metodo di pagamento
Per canali di pagamento alternativi, contattaci a:
[email protected]metodo di spedizione
AVAQ determina e confeziona tutti i dispositivi in base ai requisiti di protezione contro le scariche elettrostatiche (ESD) e il livello di sensibilità all'umidità (MSL)..
Prodotto 365 giorni
Qualità garantita
Promettiamo di fornire un servizio di garanzia della qualità di 365 giorni per tutti i nostri prodotti.
Qtà. | Prezzo unitario | Est. Prezzo |
---|---|---|
1+ | - | - |
I prezzi sottostanti sono solo di riferimento.
STM32F103RB
STMicroelectronics
MCU 32-bit ARM Cortex M3 RISC 128KB Flash 2.5V/3.3V
STM32F103C6
STMicroelectronics
Performanceline,ARM-based32-bitMCUwithFlash,USB,CAN,seven16-bittimers,twoADCsandninecommunicationinterfaces
AX88772A
ASIX
USB2.0 to 10/100MFastEthernetController
PIC18F46K20
Microchip Technology
IC MCU 8BIT 64KB FLASH 44TQFP
RTL8139C
KEMET
Advanced networking technology for demanding industrial control system