Metodo di pagamento
LSF0204DRUTR
4-Bit Bidirectional Multi-Voltage Level Translator for Open-Drain & Push-Pull
-
Produttore:
-
ProduttorePart #:
LSF0204DRUTR
-
Scheda dati:
-
Translator Type:
Voltage Level
-
Channel Type:
Bidirectional
-
Number of Circuits:
1
-
Channels per Circuit:
4
-
EDA/CAD Modelli:
Disponibilità: 3596 PZ
Compila il breve modulo sottostante e ti forniremo immediatamente il preventivo.
LSF0204DRUTR Descrizione generale
The LSF family consists of bidirectional voltage level translators that operate from 0.8 V to 4.5 V (Vref_A) and 1.8 V to 5.5 V (Vref_B). This range allows for bidirectional voltage translations between 0.8 V and 5.0 V without the need for a direction terminal in open-drain or push-pull applications. The LSF family supports level translation applications with transmission speeds greater than 100 MHz for open-drain systems that utilize a 15-pF capacitance and 165-Ω pull-up resistor.
When the An or Bn port is LOW, the switch is in the ON-state and a low resistance connection exists between the An and Bn ports. The low Ron of the switch allows connections to be made with minimal propagation delay and signal distortion. The voltage on the A or B side will be limited to Vref_A and can be pulled up to any level between Vref_A and 5 V. This functionality allows a seamless translation between higher and lower voltages selected by the user without the need for directional control.
Caratteristiche principali
- Provides bidirectional voltage translation with no direction terminal
- Supports up to 100-MHz up translation and greater than 100-MHz down translation at ≤ 30-pF capacitor load and up to 40-MHz up/down translation at 50-pF capacitor load
- Supports Ioff, partial power-down mode (refer to Feature Description)
- Allows bidirectional voltage level translation between
- 0.8 V ↔ 1.8, 2.5, 3.3, 5 V
- 1.2 V ↔ 1.8, 2.5, 3.3, 5 V
- 1.8 V ↔ 2.5, 3.3, 5 V
- 2.5 V ↔ 3.3, 5 V
- 3.3 V ↔ 5 V
- Low standby current
- 5 V Tolerance I/O port to support TTL
- Low Ron provides less signal distortion
- High-impedance I/O terminals for EN = Low
- Flow-through pinout for easy PCB trace routing
- Latch-up performance exceeds 100 mA per JESD17
- –40°C to 125°C operating temperature range
- ESD performance tested per JESD 22
- 2000-V human-body model (A114-B, Class II)
- 200-V machine model (A115-A)
- 1000-V charged-device model (C101)
Specifiche
Category | Integrated Circuits (ICs)LogicTranslators, Level Shifters | Series | - |
Translator Type | Voltage Level | Channel Type | Bidirectional |
Number of Circuits | 1 | Channels per Circuit | 4 |
Voltage - VCCA | 0.8 V ~ 4.5 V | Voltage - VCCB | 1.8 V ~ 5.5 V |
Input Signal | - | Output Signal | - |
Output Type | Open Drain, Push-Pull | Data Rate | 100MHz |
Operating Temperature | -40°C ~ 125°C (TA) | Features | Auto-Direction Sensing |
Mounting Type | Surface Mount | Base Product Number | LSF0204 |
Politiche di servizio e altro
Relativi al servizio post-vendita e alla liquidazione
Per canali di pagamento alternativi, contattaci a:
[email protected]metodo di spedizione
AVAQ determina e confeziona tutti i dispositivi in base ai requisiti di protezione contro le scariche elettrostatiche (ESD) e il livello di sensibilità all'umidità (MSL)..
Prodotto 365 giorni
Qualità garantita
Promettiamo di fornire un servizio di garanzia della qualità di 365 giorni per tutti i nostri prodotti.
Disponibilità: 3596 PCS
+BOMQtà. | Prezzo unitario | Est. Prezzo |
---|---|---|
1+ | - | - |
I prezzi sottostanti sono solo di riferimento.
Tutte le distinte materiali (BOM) possono essere inviate via e-mail a [email protected], oppure compila il modulo sottostante per effettuare un preventivo per LSF0204DRUTR, preventivi garantiti entro 12 ore.
All great the lights works (I prove about 10 of them) and the shipping was very fast ^^