Questo sito web utilizza i cookie. Utilizzando questo sito, acconsenti all'utilizzo dei cookie. Per ulteriori informazioni, dai un'occhiata al nostro politica sulla riservatezza.

Le immagini servono solo come riferimento,

Vedi Specifiche Tecniche

LP8869QPWPRQ1 +BOM

LED Driver IC 3 Output DC DC Regulator SEPIC, Step-Up (Boost) PWM Dimming 120mA 20-HTSSOP

Produttore:

Texas Instruments, Inc
ProduttorePart #:

LP8869QPWPRQ1
Scheda dati:

LP8869QPWPRQ1 Scheda dati (PDF)
Series:

Automotive, AEC-Q100
Type:

DC DC Regulator
Topology:

SEPIC, Step-Up (Boost)
Internal Switch(s):

Yes
EDA/CAD Modelli:

Richiedi modelli CAD gratuiti per LP8869QPWPRQ1

LP8869QPWPRQ1 Descrizione generale

The LP8867-Q1, LP8869-Q1 is an automotive highly-integrated, low-EMI, easy-to-use LED driver with DC-DC converter. The DC-DC converter supports both boost and SEPIC mode operation. The device has four or three high-precision current sinks that can be combined for higher current capability.

The DC-DC converter has adaptive output voltage control based on the LED forward voltages. This feature minimizes the power consumption by adjusting the voltage to the lowest sufficient level in all conditions. For EMI reduction DC-DC supports spread spectrum for switching frequency and an external synchronization with dedicated pin. A wide-range adjustable frequency allows the LP886x-Q1 to avoid disturbance for sensitive frequency band.

The input voltage range for the LP886x-Q1 is from 4.5 V to 40 V to support automotive start-stop and load dump condition. The LP886x-Q1 integrates extensive fault detection features.

Caratteristiche principali

AEC-Q100 Qualified for automotive applications:
- Device temperature grade 1:
  –40°C to +125°C, T_A
Functional safety capable
- Documentation available to aid functional safety system design
3-, 4-Channel 120-mA current sinks
- High dimming ratio of 10 000:1 at 100 Hz
- Current matching 1% (typical)
- LED String current up to 120 mA per channel
- Outputs can be combined externally for higher current per string
Integrated boost and SEPIC converter for LED string power
- Input voltage operating range 4.5 V to 40 V
- Output voltage up to 45 V
- Integrated 3.3-A Switch FET
- Switching frequency 300 kHz to 2.2 MHz
- Switching synchronization input
- Spread spectrum for lower EMI
Fault detection and protection
- Fault output
- Input voltage OVP, UVLO and OCP
- Boost block SW OVP and output OVP
- LED open and short fault detection
- Power-Line FET control for battery bus protection
- Automatic LED current reduction with external temperature sensor
- Thermal shutdown

Applicazione

– Automotive infotainment
– Automotive instrument clusters
– Smart mirrors
– Heads-up displays (HUD)

Specifiche

Category	Integrated Circuits (ICs)Power Management (PMIC)LED Drivers	Series	Automotive, AEC-Q100
Type	DC DC Regulator	Topology	SEPIC, Step-Up (Boost)
Internal Switch(s)	Yes	Number of Outputs	3
Voltage - Supply (Min)	4.5V	Voltage - Supply (Max)	45V
Voltage - Output	6V ~ 45V	Current - Output / Channel	120mA
Frequency	300kHz ~ 2.2MHz	Dimming	PWM
Applications	Automotive, Backlight	Operating Temperature	-40°C ~ 125°C (TA)
Mounting Type	Surface Mount	Base Product Number	LP8869

Politiche di servizio e altro

Relativi al servizio post-vendita e alla liquidazione

Pagamento

Metodo di pagamento

TT/bonifico bancario

PayPal

Western Union

Grammo dei soldi

Per canali di pagamento alternativi, contattaci a:

[email protected]

Spedizione e imballaggio

metodo di spedizione

Fedex

UPS

DHL

NTN

Imballaggio

AVAQ determina e confeziona tutti i dispositivi in base ai requisiti di protezione contro le scariche elettrostatiche (ESD) e il livello di sensibilità all'umidità (MSL)..