Metodo di pagamento
LMH6639MF/NOPB +BOM
190MHz Rail-to-Rail Output Amplifier with Disable
SOT-23 (DBV)-6-
Produttore:
-
ProduttorePart #:
LMH6639MF/NOPB
-
Scheda dati:
-
Pbfree Code:
Yes
-
Part Life Cycle Code:
Active
-
Pin Count:
6
-
Reach Compliance Code:
compliant
-
EDA/CAD Modelli:
All bill of materials (BOM) can be sent via email to [email protected], or fill below form to Quote for LMH6639MF/NOPB, guaranteed quotes back within 12hr.
Disponibilità: 5367 PZ
Compila il breve modulo sottostante e ti forniremo immediatamente il preventivo.
LMH6639MF/NOPB Descrizione generale
The LMH6639 is a voltage feedback operational amplifier with a rail-to-rail output drive capability of 110mA. Employing TI’s patented VIP10 process, the LMH6639 delivers a bandwidth of 190MHz at a current consumption of only 3.6mA. An input common mode voltage range extending to 0.2V below the V− and to within 1V of V+, makes the LMH6639 a true single supply op-amp. The output voltage range extends to within 30mV of either supply rail providing the user with a dynamic range that is especially desirable in low voltage applications.
The LMH6639 offers a slew rate of 172V/μs resulting in a full power bandwidth of approximately 28MHz. The LMH6639 also offers protection for the input transistors by using two anti-parallel diodes and a series resistor connected across the inputs. The TON value of 83nsec combined with a settling time of 33nsec makes this device ideally suited for multiplexing applications (see application note for details). Careful attention has been paid to ensure device stability under all operating voltages and modes. The result is a very well behaved frequency response characteristic for any gain setting including +1, and excellent specifications for driving video cables including harmonic distortion of −60dBc, differential gain of 0.12% and differential phase of 0.045°
Caratteristiche principali
- (VS = 5V, Typical Values Unless Specified)
- Supply Current (No Load) 3.6mA
- Supply Current (Off Mode) 400μA
- Output Resistance (Closed Loop 1MHz) 0.186Ω
- −3dB BW (AV = 1) 190MHz
- Settling Time 33nsec
- Input Common Mode Voltage −0.2V to 4V
- Output Voltage Swing 40mV from Rails
- Linear Output Current 110mA
- Total Harmonic Distortion −60dBc
- Fully Characterized for 3V, 5V and ±5V
- No Output Phase Reversal with CMVR Exceeded
- Excellent Overdrive Recovery
- Off Isolation 1MHz −70dB
- Differential Gain 0.12%
- Differential Phase 0.045°
All trademarks are the property of their respective owners.
Specifiche
Source Content uid | LMH6639MF/NOPB | Pbfree Code | Yes |
Part Life Cycle Code | Active | Pin Count | 6 |
Reach Compliance Code | compliant | ECCN Code | EAR99 |
HTS Code | 8542.33.00.01 | Amplifier Type | OPERATIONAL AMPLIFIER |
Architecture | VOLTAGE-FEEDBACK | Average Bias Current-Max (IIB) | 3.25 µA |
Bandwidth (3dB)-Nom | 63 MHz | Bias Current-Max (IIB) @25C | 2.6 µA |
Common-mode Reject Ratio-Min | 72 dB | Common-mode Reject Ratio-Nom | 95 dB |
Frequency Compensation | YES | Input Offset Current-Max (IIO) | 0.8 µA |
Input Offset Voltage-Max | 5000 µV | JESD-30 Code | R-PDSO-G6 |
JESD-609 Code | e3 | Length | 2.92 mm |
Low-Bias | NO | Low-Offset | NO |
Micropower | NO | Moisture Sensitivity Level | 1 |
Neg Supply Voltage Limit-Max | -6.3 V | Neg Supply Voltage-Nom (Vsup) | -5 V |
Number of Functions | 1 | Number of Terminals | 6 |
Operating Temperature-Max | 85 °C | Operating Temperature-Min | -40 °C |
Packing Method | TR | Peak Reflow Temperature (Cel) | 260 |
Power | NO | Programmable Power | NO |
Qualification Status | Not Qualified | Seated Height-Max | 1.22 mm |
Slew Rate-Min | 120 V/us | Slew Rate-Nom | 200 V/us |
Supply Current-Max | 5.8 mA | Supply Voltage Limit-Max | 6.3 V |
Supply Voltage-Nom (Vsup) | 5 V | Surface Mount | YES |
Technology | BIPOLAR | Temperature Grade | INDUSTRIAL |
Terminal Finish | MATTE TIN | Terminal Form | GULL WING |
Terminal Pitch | 0.95 mm | Terminal Position | DUAL |
Time@Peak Reflow Temperature-Max (s) | 30 | Unity Gain BW-Nom | 228000 |
Voltage Gain-Min | 5011.872 | Wideband | YES |
Width | 1.6 mm |
Politiche di servizio e altro
Relativi al servizio post-vendita e alla liquidazione
Per canali di pagamento alternativi, contattaci a:
[email protected]metodo di spedizione
AVAQ determina e confeziona tutti i dispositivi in base ai requisiti di protezione contro le scariche elettrostatiche (ESD) e il livello di sensibilità all'umidità (MSL)..
Prodotto 365 giorni
Qualità garantita
Promettiamo di fornire un servizio di garanzia della qualità di 365 giorni per tutti i nostri prodotti.
In Stock: 5.367
Minimum Order: 1
Qtà. | Prezzo unitario | Est. Prezzo |
---|---|---|
1+ | - | - |
I prezzi sottostanti sono solo di riferimento.