Questo sito web utilizza i cookie. Utilizzando questo sito, acconsenti all'utilizzo dei cookie. Per ulteriori informazioni, dai un'occhiata al nostro politica sulla riservatezza.

Le immagini servono solo come riferimento,

Vedi Specifiche Tecniche

LMH6526SP +BOM

Laser Driver 4-CH 28-Pin UQFN EP T/R

Produttore:

Texas Instruments, Inc
ProduttorePart #:

LMH6526SP
Scheda dati:

LMH6526SP Scheda dati (PDF)
Pacchetto/custodia:

UQFN-28
Tipologia di prodotto:

Drivers
Ciclo vitale:

Obsolete
EDA/CAD Modelli:

Richiedi modelli CAD gratuiti per LMH6526SP

LMH6526SP Descrizione generale

The LMH6525/6526 is a laser diode driver for use in combination DVD/CD recordable and rewritable systems. The part contains two high-current outputs for reading and writing the DVD (650 nm) and CD (780 nm) lasers. Functionality includes read, write and erase through four separate switched current channels. The channel currents are summed together at the selected output to generate multilevel waveforms for reading, writing and erasing of optical discs. The LVDS interface delivers DVD write speeds of 16x and higher while minimizing noise and crosstalk. The LMH6525/6526 is optimized for both speed and power consumption to meet the demands of next generation systems. The part features a 150 mA read channel plus one 300 mA and two 150 mA write channels, which can be summed to allow a total output current of 600 mA or greater. The channel currents are set through four independent current inputs.

An on-board High-Frequency Modulator (HFM) oscillator helps reduce low-frequency noise of the laser and is enabled by applying LVDS levels on the ENOSC pins for the LMH6525, while the LMH6526 is enabled by applying an asymmetrical signal on the ENOSC pin. The fully differential oscillator circuit minimizes supply line noise, easing FCC approval of the overall system. The SELA/B pin (active HIGH) selects the output channel and oscillator settings. External resistors determine oscillator frequency and amplitude for each setting. The write and erase channels can be switched on and off through dedicated LVDS interface pins.

Caratteristiche principali

Fast Switching: Rise and Fall Times: 0.6/1.0 ns.
Low Voltage Differential Signaling (LVDS) Channels Enable Interface for the Fast Switching Lines
Low Output Current Noise: 0.24 nA/√Hz
Dual Output: Selectable by SELA/B Pin (Active HIGH)
SELA = LMH6526SEB = LMH6525
Four Independent Current Channels
Gain of 300, 300 mA Write Channel
Gain of 150, 150 mA Low-Noise Read Channel
Two Gain of 150, 150 mA Write Channels
600 mA Minimum Combined Output Current
Integrated AC Coupled HFM Oscillator
Selectable Frequency and Amplitude Setting
By External Resistors
200 MHz to 600 MHz Frequency Range
Amplitude to 100 mA Peak-to-Peak Modulation
Complete Shutdown by ENABLE Pin
5V Single-Supply Operation
Logic inputs TTL and CMOS compatible
Space Saving Package (OFN)
LMH6525 has Differential Enable Oscillator Inputs
LMH6526 has Single Ended Enable Oscillator Inputs

Specifiche

Product Category:	Laser Drivers	Product Type:	Laser Drivers
Subcategory:	Driver ICs

Politiche di servizio e altro

Relativi al servizio post-vendita e alla liquidazione

Pagamento

Metodo di pagamento

TT/bonifico bancario

PayPal

Western Union

Grammo dei soldi

Per canali di pagamento alternativi, contattaci a:

[email protected]

Spedizione e imballaggio

metodo di spedizione

Fedex

UPS

DHL

NTN

Imballaggio

AVAQ determina e confeziona tutti i dispositivi in base ai requisiti di protezione contro le scariche elettrostatiche (ESD) e il livello di sensibilità all'umidità (MSL)..