Questo sito web utilizza i cookie. Utilizzando questo sito, acconsenti all'utilizzo dei cookie. Per ulteriori informazioni, dai un'occhiata al nostro politica sulla riservatezza.

Le immagini servono solo come riferimento,

Vedi Specifiche Tecniche

LM6132BIMX/NOPB +BOM

Operational amplifier with 10MHz bandwidth and 2 channels, suitable for voltage supply between 1.8V and 24V, in SO8 package

Produttore:

TI
ProduttorePart #:

LM6132BIMX/NOPB
Scheda dati:

LM6132BIMX/NOPB Scheda dati (PDF)
Number Of Channels:

2
Total Supply Voltage (+5 V = 5, ±5 V = 10) (max) (V):

24
Total Supply Voltage (+5 V = 5, ±5 V = 10) (min) (V):

2.7
Rail-to-rail:

In, Out
EDA/CAD Modelli:

Richiedi modelli CAD gratuiti per LM6132BIMX/NOPB

LM6132BIMX/NOPB Descrizione generale

The LM6132/34 provides new levels of speed vs. power performance in applications where low voltage supplies or power limitations previously made compromise necessary. With only 360 µA/amp supply current, the 10 MHz gain-bandwidth of this device supports new portable applications where higher power devices unacceptably drain battery life.

The LM6132/34 can be driven by voltages that exceed both power supply rails, thus eliminating concerns over exceeding the common-mode voltage range. The rail-to-rail output swing capability provides the maximum possible dynamic range at the output. This is particularly important when operating on low supply voltages. The LM6132/34 can also drive large capacitive loads without oscillating.

Operating on supplies from 2.7 V to over 24 V, the LM6132/34 is excellent for a very wide range of applications, from battery operated systems with large bandwidth requirements to high speed instrumentation.

Caratteristiche principali

Low noise and high accuracy
Ultra-wide bandwidth available
Rail-to-rail output for low distortion
High-speed amplifier with wide dynamic range
Fast settling time for accurate results
Suitable for audio and RF applications

Specifiche

Number of channels	2	Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V)	24
Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V)	2.7	Rail-to-rail	In, Out
GBW (typ) (MHz)	10	Slew rate (typ) (V/µs)	14
Vos (offset voltage at 25°C) (max) (mV)	2	Iq per channel (typ) (mA)	0.36
Vn at 1 kHz (typ) (nV√Hz)	27	Rating	Catalog
Operating temperature range (°C)	-40 to 85	Offset drift (typ) (µV/°C)	5
Input bias current (max) (pA)	140000	CMRR (typ) (dB)	107
Iout (typ) (A)	0.0043	Architecture	Bipolar
Input common mode headroom (to negative supply) (typ) (V)	-0.25	Input common mode headroom (to positive supply) (typ) (V)	0.25
Output swing headroom (to negative supply) (typ) (V)	0.032	Output swing headroom (to positive supply) (typ) (V)	-0.048

Politiche di servizio e altro

Relativi al servizio post-vendita e alla liquidazione

Pagamento

Metodo di pagamento

TT/bonifico bancario

PayPal

Western Union

Grammo dei soldi

Per canali di pagamento alternativi, contattaci a:

[email protected]

Spedizione e imballaggio

metodo di spedizione

Fedex

UPS

DHL

NTN

Imballaggio

AVAQ determina e confeziona tutti i dispositivi in base ai requisiti di protezione contro le scariche elettrostatiche (ESD) e il livello di sensibilità all'umidità (MSL)..