Questo sito web utilizza i cookie. Utilizzando questo sito, acconsenti all'utilizzo dei cookie. Per ulteriori informazioni, dai un'occhiata al nostro politica sulla riservatezza.

Le immagini servono solo come riferimento,

Vedi Specifiche Tecniche

LM4950TSX/NOPB +BOM

3.1-W, mono, 9.6- to 16-V, analog input Class-AB audio amplifier

Produttore:

Texas Instruments, Inc
ProduttorePart #:

LM4950TSX/NOPB
Scheda dati:

LM4950TSX/NOPB Scheda dati (PDF)
Series:

Boomer®
Type:

Class AB
Output Type:

1-Channel (Mono) or 2-Channel (Stereo)
Max Output Power X Channels @ Load:

7.5W x 1 @ 8Ohm; 3.1W x 2 @ 4Ohm
EDA/CAD Modelli:

Richiedi modelli CAD gratuiti per LM4950TSX/NOPB

E-mail: [email protected]

Skype: live:.cid.ab6b29428937b76

tel: +852 95804164

LM4950TSX/NOPB Descrizione generale

The LM4950 is a dual audio power amplifier primarily designed for demanding applications in flat panel monitors and TV's. It is capable of delivering 3.1 watts per channel to a 4Ω single-ended load with less than 1% THD+N or 7.5 watts mono BTL to an 8Ω load, with less than 10% THD+N from a 12V_DC power supply.

Boomer audio power amplifiers were designed specifically to provide high quality output power with a minimal amount of external components. The LM4950 does not require bootstrap capacitors or snubber circuits. Therefore, it is ideally suited for display applications requiring high power and minimal size.

The LM4950 features a low-power consumption active-low shutdown mode. Additionally, the LM4950 features an internal thermal shutdown protection mechanism along with short circuit protection.

The LM4950 contains advanced pop & click circuitry that eliminates noises which would otherwise occur during turn-on and turn-off transitions.

The LM4950 is a unity-gain stable and can be configured by external gain-setting resistors.

Caratteristiche principali

Pop & Click Circuitry Eliminates Noise During Turn-On and Turn-Off Transitions
Low Current, Active-Low Shutdown Mode
Low Quiescent Current
Stereo 3.1W Output, R_L = 4Ω
Mono 7.5W BTL Output, R_L = 8Ω
Short Circuit Protection
Unity-Gain Stable
External Gain Configuration Capability

Key Specifications

Quiescent Power Supply Current 16mA (typ)
P_OUT (SE)
- V_DD = 12V, R_L = 4Ω, 1% THD+N: 3.1W (typ)
P_OUT (BTL)
- V_DD = 12V, R_L = 8Ω, 10% THD+N: 7.5W (typ)
Shutdown Current 40μA (typ)

All trademarks are the property of their respective owners.

Specifiche

Category	Integrated Circuits (ICs)LinearAmplifiersAudio Amplifiers	Series	Boomer®
Type	Class AB	Output Type	1-Channel (Mono) or 2-Channel (Stereo)
Max Output Power x Channels @ Load	7.5W x 1 @ 8Ohm; 3.1W x 2 @ 4Ohm	Voltage - Supply	9.6V ~ 16V
Features	Depop, Short-Circuit and Thermal Protection, Shutdown	Mounting Type	Surface Mount
Operating Temperature	-40°C ~ 85°C (TA)	Base Product Number	LM4950
Audio input type	Analog Input	Architecture	Class-AB
Speaker channels (max)	Stereo	Rating	Catalog
Power stage supply (max) (V)	16	Power stage supply (min) (V)	9.6
Load (min) (Ω)	4	Output power (W)	7.5
THD + N at 1 kHz (%)	0.03	Iq (typ) (mA)	16
Control interface	Hardware	Closed/open loop	Open
Analog supply (min) (V)	9.6	Analog supply voltage (max) (V)	16
PSRR (dB)	70	Operating temperature range (°C)	-40 to 85
feature-function	Speaker	feature-amplifier-type	Class-AB
feature-rail-to-rail		feature-typical-gain-bandwidth-product-mhz
feature-typical-psrr-db	70	feature-total-harmonic-distortion-noise	0.05%@[email protected]
feature-input-signal-type	Single	feature-output-signal-type	Single\|Differential
feature-output-type	1-Channel Mono\|2-Channel Stereo	feature-maximum-output-current-ma	5000(Typ)
feature-maximum-input-offset-voltage-mv	30	feature-maximum-input-bias-current-ua
feature-maximum-power-dissipation-mw		feature-packaging	Tape and Reel
feature-rad-hard		feature-pin-count	10
feature-cecc-qualified	No	feature-esd-protection	Yes
feature-military	No	feature-aec-qualified	No
feature-aec-qualified-number		feature-auto-motive	No
feature-p-pap	No	feature-eccn-code	EAR99
feature-svhc	Yes	feature-svhc-exceeds-threshold	Yes

Politiche di servizio e altro

Relativi al servizio post-vendita e alla liquidazione

Pagamento

Metodo di pagamento

TT/bonifico bancario

PayPal

Western Union

Grammo dei soldi

Per canali di pagamento alternativi, contattaci a:

[email protected]

Spedizione e imballaggio

metodo di spedizione

Fedex

UPS

DHL

NTN

Imballaggio

AVAQ determina e confeziona tutti i dispositivi in base ai requisiti di protezione contro le scariche elettrostatiche (ESD) e il livello di sensibilità all'umidità (MSL)..