Questo sito web utilizza i cookie. Utilizzando questo sito, acconsenti all'utilizzo dei cookie. Per ulteriori informazioni, dai un'occhiata al nostro politica sulla riservatezza.

Le immagini servono solo come riferimento,

Vedi Specifiche Tecniche

LM4132DMF-2.0/NOPB +BOM

0.05% 20-ppm/°C drift precision series voltage reference with shutdown enable

Produttore:

Texas Instruments
ProduttorePart #:

LM4132DMF-2.0/NOPB
Scheda dati:

LM4132DMF-2.0/NOPB Scheda dati (PDF)
Mounting Style:

SMD/SMT
Reference Type:

Series Precision References
Output Voltage:

2.048 V
Initial Accuracy:

0.4 %
EDA/CAD Modelli:

Richiedi modelli CAD gratuiti per LM4132DMF-2.0/NOPB

E-mail: [email protected]

Skype: live:.cid.ab6b29428937b76

tel: +852 95804164

LM4132DMF-2.0/NOPB Descrizione generale

The LM4132 family of precision voltage references performs comparable to the best laser-trimmed bipolar references, but in cost-effective CMOS technology. The key to this breakthrough is the use of EEPROM registers for correction of curvature, temperature coefficient (tempco), and accuracy on a CMOS band-gap architecture allowing package-level programming to overcome assembly shift. The shifts in voltage accuracy and tempco during assembly of die into plastic packages limit the accuracy of references trimmed with laser techniques.

Unlike other LDO references, the LM4132 can deliver up to 20 mA and does not require an output capacitor or buffer amplifier. These advantages along with the SOT-23 packaging are important for space-critical applications.

Series references provide lower power consumption than shunt references, because they do not have to idle the maximum possible load current under no-load conditions. This advantage, the low quiescent current (60 µA), and the low dropout voltage (400 mV) make the LM4132 ideal for battery-powered solutions.

The LM4132 is available in five grades (A, B, C, D and E) for greater flexibility. The best grade devices (A) have an initial accuracy of 0.05% with a specified temperature coefficient of 10 ppm/°C or less, while the lowest grade devices (E) have an initial accuracy of 0.5% and a tempco of 30 ppm/°C.

Caratteristiche principali

Qualified for Automotive Applications
AEC-Q100 Qualified With the Following Results:
- Device Temperature Grade 1: –40°C to +125°C Ambient Operating Temperature Range
- Device HBM ESD Classification Level 2
Output Initial Voltage Accuracy: 0.05%
Low Temperature Coefficient: 10 ppm/°C
Low Supply Current: 60 µA
Enable Pin Allowing a 3-µA Shutdown Mode
20-mA Output Current
Voltage Options: 1.8 V, 2.048 V, 2.5 V, 3 V, 3.3 V, 4.096 V
Custom Voltage Options Available (1.8 V to 4.096 V)
V_IN Range of V_REF + 400 mV to 5.5 V at 10 mA
Stable With Low-ESR Ceramic Capacitors

Specifiche

Product Category	Voltage References	Mounting Style	SMD/SMT
Reference Type	Series Precision References	Output Voltage	2.048 V
Initial Accuracy	0.4 %	Temperature Coefficient	30 PPM / C
Series VREF - Input Voltage - Max	6 V	Shunt Current - Max	20 mA
Minimum Operating Temperature	- 40 C	Maximum Operating Temperature	+ 125 C
Series	LM4132	Accuracy	25 PPM/mA
Height	1.02 mm	Length	2.92 mm
Load Regulation	25 PPM/mA	Operating Supply Current	60 uA
Product	Voltage References	Product Type	Voltage References
Factory Pack Quantity	1000	Subcategory	PMIC - Power Management ICs
Topology	Series References	Width	1.6 mm
Unit Weight	0.000282 oz

Politiche di servizio e altro

Relativi al servizio post-vendita e alla liquidazione

Pagamento

Metodo di pagamento

TT/bonifico bancario

PayPal

Western Union

Grammo dei soldi

Per canali di pagamento alternativi, contattaci a:

[email protected]

Spedizione e imballaggio

metodo di spedizione

Fedex

UPS

DHL

NTN

Imballaggio

AVAQ determina e confeziona tutti i dispositivi in base ai requisiti di protezione contro le scariche elettrostatiche (ESD) e il livello di sensibilità all'umidità (MSL)..