Metodo di pagamento
LM22670MRE-ADJ +BOM
High efficiency
8PSOP-
Produttore:
-
ProduttorePart #:
LM22670MRE-ADJ
-
Scheda dati:
-
Part Life Cycle Code:
Transferred
-
Reach Compliance Code:
compliant
-
ECCN Code:
EAR99
-
HTS Code:
8542.39.00.01
Invia tutte le distinte materiali a [email protected], oppure compila il modulo sottostante per un preventivo su LM22670MRE-ADJ. Risposta garantita entro 12hr.
Disponibilità: 6097 PZ
Compila il breve modulo sottostante e ti forniremo immediatamente il preventivo.
LM22670MRE-ADJ Descrizione generale
Description for the LM22670The LM22670 switching regulator provides all of the functions necessary to implement an efficient high voltage step-down (buck) regulator using a minimum of external components. This easy to use regulator incorporates a 42 V N-channel MOSFET switch capable of providing up to 3 A of load current. Excellent line and load regulation along with high efficiency (> 90%) are featured. Voltage mode control offers short minimum on-time, allowing the widest ratio between input and output voltages. Internal loop compensation means that the user is free from the tedious task of calculating the loop compensation components. Fixed 5 V output and adjustable output voltage options are available. The default switching frequency is set at 500 kHz allowing for small external components and good transient response. In addition, the frequency can be adjusted over a range of 200 kHz to 1 MHz with a single external resistor. The internal oscillator can be synchronized to a system clock or to the oscillator of another regulator. A precision enable input allows simplification of regulator control and system power sequencing. In shutdown mode the regulator draws only 25 µA (typ). Built in soft-start (500 µs, typ) saves external components. The LM22670 device also has built-in thermal shutdown, and current limiting to protect against accidental overloads.The LM22670 device is a member of Texas Instruments’ SIMPLE SWITCHER® family. The SIMPLE SWITCHER® concept provides for an easy to use complete design using a minimum number of external components and the TI WEBENCH® design tool. TI's WEBENCH® tool includes features such as external component calculation, electrical simulation, thermal simulation, and build-It boards for easy design-in.
Caratteristiche principali
Features for the LM22670
- Wide Input Voltage Range: 4.5 V to 42 V
- Internally Compensated Voltage Mode Control
- Stable with Low ESR Ceramic Capacitors
- 120 mΩ N-channel MOSFET PFM Package
- 100 mΩ N-channel MOSFET SO PowerPAD-8 Package
- Output Voltage Options: -ADJ (Outputs as Low as 1.285 V) -5.0 (Output Fixed to 5 V)
- ±1.5% Feedback Reference Accuracy
- 500 kHz Default Switching Frequency
- Adjustable Switching Frequency and Synchronization
- –40°C to 125°C Operating Junction Temperature Range
- Precision Enable Pin
- Integrated Boot-Strap Diode
- Integrated Soft-Start
- Fully WEBENCH® enabled
- LM22670-Q1 is an Automotive Grade Product that is AEC-Q100 Grade 1 Qualified (–40°C to +125°C Operating Junction Temperature)
Specifiche
Source Content uid | LM22670MRE-ADJ | Part Life Cycle Code | Transferred |
Reach Compliance Code | compliant | ECCN Code | EAR99 |
HTS Code | 8542.39.00.01 | Additional Feature | ALSO HAS ADJUSTABLE OUTPUTS AS LOW AS 1.285V |
Analog IC - Other Type | SWITCHING REGULATOR | Control Mode | VOLTAGE-MODE |
Control Technique | PULSE WIDTH MODULATION | Input Voltage-Max | 42 V |
Input Voltage-Min | 4.5 V | Input Voltage-Nom | 12 V |
JESD-30 Code | R-PDSO-G8 | JESD-609 Code | e0 |
Length | 4.9 mm | Moisture Sensitivity Level | 3 |
Number of Functions | 1 | Number of Terminals | 8 |
Operating Temperature-Max | 125 °C | Operating Temperature-Min | -40 °C |
Output Current-Max | 5.5 A | Qualification Status | Not Qualified |
Seated Height-Max | 1.68 mm | Surface Mount | YES |
Switcher Configuration | BUCK | Switching Frequency-Max | 600 kHz |
Temperature Grade | AUTOMOTIVE | Terminal Finish | TIN LEAD |
Terminal Form | GULL WING | Terminal Pitch | 1.27 mm |
Terminal Position | DUAL | Width | 3.9 mm |
Politiche di servizio e altro
Relativi al servizio post-vendita e alla liquidazione
Per canali di pagamento alternativi, contattaci a:
[email protected]metodo di spedizione
AVAQ determina e confeziona tutti i dispositivi in base ai requisiti di protezione contro le scariche elettrostatiche (ESD) e il livello di sensibilità all'umidità (MSL)..
Prodotto 365 giorni
Qualità garantita
Promettiamo di fornire un servizio di garanzia della qualità di 365 giorni per tutti i nostri prodotti.
In Stock: 6.097
Minimum Order: 1
Qtà. | Prezzo unitario | Est. Prezzo |
---|---|---|
1+ | - | - |
I prezzi sottostanti sono solo di riferimento.