Questo sito web utilizza i cookie. Utilizzando questo sito, acconsenti all'utilizzo dei cookie. Per ulteriori informazioni, dai un'occhiata al nostro politica sulla riservatezza.

Le immagini servono solo come riferimento,

Vedi Specifiche Tecniche

L9908 +BOM

Motor / Motion / Ignition Controllers & Drivers Automotive 3-phase motor gate driver unit

Produttore:

STMicroelectronics, Inc
ProduttorePart #:

L9908
Scheda dati:

L9908 Scheda dati (PDF)
ECCN (US):

EAR99
ECCN (EU):

NEC
Packing Type:

Tray
Temperature (°C) Min:

-40
EDA/CAD Modelli:

Richiedi modelli CAD gratuiti per L9908

E-mail: [email protected]

Skype: live:.cid.ab6b29428937b76

tel: +852 95804164

L9908 Descrizione generale

Specific CAN-controlled brushless motor evaluati.Specific CAN-controlled brushless motor evaluati.

Caratteristiche principali

AEC-Q100 qualified
Full ISO26262 compliant, ASIL-D systems ready
VDH motor supply voltage range from 4.5 V to 75 V for working in single (12 V systems), double (24 V systems) and 48 V battery applications
3.3 V internal supply voltage generated from 5 V on VDD pin
Digital I/O compatible to 3.3 V/5 V logics
6 separate N-channel FET pre-drivers:
dedicated source connection to each FET
the device can withstand -14 V to 95 V on motor connection pins
0% to 100% duty cycle operation support
dedicated PWM input pin for each gate driver
dedicated source connection to each FET
the device can withstand -14 V to 95 V on motor connection pins
0% to 100% duty cycle operation support
dedicated PWM input pin for each gate driver
3 differential high accuracy current monitors for ground referred current measurements:
ADC/DAC architecture
SPI adjustable Gain Factor and Output Offset
built-in error calibration
the device can withstand -14 V to 6 V on input sensing pins
SPI readable current measurement
0 to 4.6 V DAC output dynamic range
ADC/DAC architecture
SPI adjustable Gain Factor and Output Offset
built-in error calibration
the device can withstand -14 V to 6 V on input sensing pins
SPI readable current measurement
0 to 4.6 V DAC output dynamic range
3 real time phase voltage monitor channels:
SPI programmable phase voltage feedback;
SPI readable phase duty cycle measurement;
SPI programmable phase voltage feedback;
SPI readable phase duty cycle measurement;
32-bit - 10 MHz SPI interface with 5-bit CRC and 1bit frame counter for internal setting, self-test and full diagnostics
Protection and diagnostic:
SPI programmable VDS diagnostic and protection in on-state
SPI programmable Dead Time protection
SPI programmable Shoot-through diagnostic and protection
Open load, short to GND and short to battery diagnostic in off-state
Over-temperature diagnostic and protection with SPI programmable warning flag
SPI readable Tj measurement
Ground loss diagnostic
System clock monitoring
Power supply pins VDD, VDH, VBP over-voltage and under-voltage diagnostic
FET driver supply VPRE and VCP under-voltage and over-voltage diagnostic
SPI Window Watchdog
Fault status flag output
SPI programmable VDS diagnostic and protection in on-state
SPI programmable Dead Time protection
SPI programmable Shoot-through diagnostic and protection
Open load, short to GND and short to battery diagnostic in off-state
Over-temperature diagnostic and protection with SPI programmable warning flag
SPI readable Tj measurement
Ground loss diagnostic
System clock monitoring
Power supply pins VDD, VDH, VBP over-voltage and under-voltage diagnostic
FET driver supply VPRE and VCP under-voltage and over-voltage diagnostic
SPI Window Watchdog
Fault status flag output

Specifiche

Marketing Status	Active	ECCN (US)	EAR99
ECCN (EU)	NEC	Packing Type	Tray
Temperature (°C) min	-40	Temperature (°C) max	150

Politiche di servizio e altro

Relativi al servizio post-vendita e alla liquidazione

Pagamento

Metodo di pagamento

TT/bonifico bancario

PayPal

Western Union

Grammo dei soldi

Per canali di pagamento alternativi, contattaci a:

[email protected]

Spedizione e imballaggio

metodo di spedizione

Fedex

UPS

DHL

NTN

Imballaggio

AVAQ determina e confeziona tutti i dispositivi in base ai requisiti di protezione contro le scariche elettrostatiche (ESD) e il livello di sensibilità all'umidità (MSL)..