Questo sito web utilizza i cookie. Utilizzando questo sito, acconsenti all'utilizzo dei cookie. Per ulteriori informazioni, dai un'occhiata al nostro politica sulla riservatezza.

Le immagini servono solo come riferimento,

Vedi Specifiche Tecniche

KSZ8895MQXI +BOM

Ethernet Switch 10/100 Base-T/TX I2C, SPI Interface 128-PQFP (14x20)

Produttore:

Microchip Technology, Inc
ProduttorePart #:

KSZ8895MQXI
Scheda dati:

KSZ8895MQXI Scheda dati (PDF)
Mask:

XKBB1
LeadContent:

Pb-FREE
RestrictionLevel:

STANDARD
PackingMedia:

TRAY
EDA/CAD Modelli:

Richiedi modelli CAD gratuiti per KSZ8895MQXI

E-mail: [email protected]

Skype: live:.cid.ab6b29428937b76

tel: +852 95804164

KSZ8895MQXI Descrizione generale

The KSZ8895MQX/RQX/FQX/ML is a highly-integrated, Layer 2 managed, five-port switch with numerous features designed to reduce system cost. The KSZ8895 is Automotive qualified (AEC-Q100).

The KSZ8895 family was designed to be used in for cost sensitive 10/100Mbps five-port switch systems with low power requirements. Combining on-chip termination and internal LDO regulator help minimize system cost.The KSZ8895 family supports high-performance memory bandwidth and shared memory-based switch fabric with non-blocking configuration.

The KSZ8895family also includes an extensive feature set, including: power management, programmable rate limit and priority ratio, tag/port-based VLAN, packets filtering, four queue QoS prioritization, management interfaces, and MIB counters.

The KSZ8895 family provides multiple CPU data interfaces to effectively address both current and emerging fast Ethernet applications when port 5 is configured to separate MAC5 with SW5-MII/RMII and PHY5 with P5-MII/RMII interfaces.The KSZ8895 family offers three configurations, providing the flexibility to meet different requirements:

KSZ8895MQX/ML has 5 10/100Base-T/TX transceivers, 1 SW5-MII and 1 P5-MII interface
KSZ8895RQX has 5 10/100Base-T/TX transceivers, 1 SW5-RMII and 1 P5-RMII interface
KSZ8895FQX has 4 10/100Base-T/TX transceivers on Ports 1, 2, 3 and 5 (port 3 can be set to the fiber mode). 1 100Base-FX transceivers on Port 4. 1 SW5-MII and 1 P5-MII interface

All registers of MACs and PHYs units can be managed by the SPI or the SMI interface. MIIM registers can be accessed through the MDC/MDIO interface.

EEPROM can set all control registers for the unmanaged mode.KSZ8895MQX/RQX/FQX are 128-pin PQFP package. KSZ8895ML is 128-pin LQFP package.Microchip's complimentary and confidential LANCheck® online design review service is available for customers who have selected our products for their application design-in. The LANCheck online design review service is subject to Microchip's Program Terms and Conditions and requires a myMicrochip account.

**Please note: KSZ8895 part numbers ending/containing "A" are not recommended for new designs**i.e. For new designs, instead of using KSZ8895MQXIA, please use KSZ8895MQXI.

Caratteristiche principali

Advanced Switch Features
IEEE 802.1q VLAN support for up to 128 active VLAN groups (full-range 4096 of VLAN IDs)
Static MAC table supports up to 32 entries
VLAN ID tag/untag options, per port basis
Comprehensive Configuration Register Access
Serial management interface (MDC/MDIO) to all PHYs registers and SMI interface (MDC/MDIO) to all registers
High-speed SPI (up to 25MHz) and I2C master Interface to all internal registers
I/0 pins strapping and EEPROM to program selective registers in unmanaged switch mode
QoS/CoS Packet Prioritization Support
Per port, 802.1p and DiffServ-based
1/2/4-queue QoS prioritization selection
Programmable weighted fair queuing for ratio control
Integrated 5-Port 10/100 Ethernet Switch
New generation switch with five MACs and five PHYs that are fully compliant with the IEEE 802.3u standard
PHYs designed with patented enhanced mixed-signal technology
Non-blocking switch fabric assures fast packet delivery by utilizing a 1K MAC address lookup table and a store-and-forward architecture
Switch Monitoring Features
Port mirroring/monitoring/sniffing: ingress and/or egress traffic to any port or MII/RMII
MIB counters for fully-compliant statistics gathering 34 MIB counters per port
Loop-back support for MAC, PHY, and remote diagnostic of failure
Low-Power Dissipation
Full-chip software power-down and per port software power down
Energy-detect mode support <100mW full-chip power consumption when all ports have no activity

Applicazione

Industrial Ethernet Switches:
- Utilized in industrial networking and automation systems to provide Ethernet connectivity and manage data traffic between industrial devices and controllers.
Network Routers and Switches:
- Integrated into network routers and switches to enable Ethernet connectivity for multiple devices in office and home networks.
IoT Gateways:
- Applied in IoT (Internet of Things) gateways to facilitate Ethernet connectivity for IoT devices and sensors.
Embedded Systems:
- Used in various embedded systems and networking equipment to expand Ethernet connectivity options.
Smart Grids and Energy Management:
- Deployed in smart grid systems and energy management solutions to support communication between grid components and data collection.
Telecommunications Equipment:
- Integrated into telecommunications equipment, including switches and routers, to provide Ethernet connectivity in network infrastructure.

Specifiche

Mask	XKBB1	LeadContent	Pb-FREE
RestrictionLevel	STANDARD	PackingMedia	TRAY
TempLevel	Industrial	TempRange	-40C to +85C
Stage	REL	LeadCount	128
ProductClassDescription	Industrial Temp (I)	PackingMediaDescription	Tray
Weight	0.0040151515

Politiche di servizio e altro

Relativi al servizio post-vendita e alla liquidazione

Pagamento

Metodo di pagamento

TT/bonifico bancario

PayPal

Western Union

Grammo dei soldi

Per canali di pagamento alternativi, contattaci a:

[email protected]

Spedizione e imballaggio

metodo di spedizione

Fedex

UPS

DHL

NTN

Imballaggio

AVAQ determina e confeziona tutti i dispositivi in base ai requisiti di protezione contro le scariche elettrostatiche (ESD) e il livello di sensibilità all'umidità (MSL)..