Questo sito web utilizza i cookie. Utilizzando questo sito, acconsenti all'utilizzo dei cookie. Per ulteriori informazioni, dai un'occhiata al nostro politica sulla riservatezza.

Le immagini servono solo come riferimento,

Vedi Specifiche Tecniche

JN5179-001-M10Z +BOM

ZigBee 3.0 and IEEE802.15.4 Module

Produttore:

NXP Semiconductor
ProduttorePart #:

JN5179-001-M10Z
Scheda dati:

JN5179-001-M10Z Scheda dati (PDF)
Programmable:

Not Verified
RF Family/Standard:

802.15.4
Protocol:

Zigbee®
Frequency:

2.4GHz
EDA/CAD Modelli:

Richiedi modelli CAD gratuiti per JN5179-001-M10Z

JN5179-001-M10Z Descrizione generale

Note: JN5189/88T is preferred for any new new Zigbee?,Thread design. No new software releases plannedThe JN5179 device is an ultra-low-power, high-performance wireless microcontroller, optimized as a platform forZigBee 3.0 applications in Smart Home and Smart Lighting networks. It features an Arm?Cortex?-M3 processor with debug and programmable clock speeds. The JN5179 device has 512 kB ofembedded Flash memory as well as 32 kB of RAM and 4 kB of EEPROM. The embedded Flash can support"Over-The-Air" firmware updates. The device also includes a 2.4 GHz "IEEE802.15.4 compliant"transceiver and a comprehensive mix of on-chip analog and digital peripherals.The radio transmit power is configurable up to +10 dBm output. The very-low receive operating current (down to 12.7mA in normal operation and 0.6 μA in sleep mode) results in long battery life, allowing operation directlyfrom a coin cell. Through its power-saving modes, the device is therefore ideal for battery-powered nodes. Theon-chip peripherals include a fail-safe I2C-bus, SPI-bus ports (both leader and follower) and a 6-channelanalog-to-digital converter, directly supporting a wide range of applications without the need for extra hardware.For support documentation, please click here.

Caratteristiche principali

Very low current solution for long battery life: over 10 years
Very low receive current for low standby power of ‘receiver always on’ nodes
Integrated power amplifier for long range and robust communication
Large embedded Flash memory to enable Over-The-Air (OTA) firmware updates without external Flash memory
Single-chip device to run communication stack and application
Supports multiple network stacks
Peripherals customized for lighting applications
System BOM is low in component count and cost
Flexible sensor interfacing
Package
6 x 6 mm HVQFN40, 0.5 mm pitch
lead-free and RoHS compliant
Temperature range: -40 °C to +125 °C
2.4 GHz IEEE802.15.4 compliant
Receive current 14.8 mA, in low-power receive mode 12.7 mA
Receiver sensitivity -96 dBm
Configurable transmit power for reduced current consumption, for example:
10 dBm, 22.5 mA
8.5 dBm, 19.6 mA
3 dBm, 14mA
Radio link budget 106 dB
Maximum input level of +10 dBm
Compensation for temperature drift of crystal oscillator frequency
2.0 V to 3.6 V battery operation
Antenna diversity (Auto RX)
Integrated ultra-low-power sleep oscillator (0.6 μA)
100 nA deep sleep current with wake-up from external event
128-bit AES security processor
MAC accelerator with packet formatting, CRCs, address check, auto-acks, timers
Cortex-M3 CPU with debug support
512kB Flash, 32kB RAM, 4kB EEPROM
OTA firmware upgrade capability
32 MHz clock selectable down to 1 MHz for low-power operation
Dual PAN ID support
Fail-safe I
2
C-bus interface, operates as either controller or target
8 Timers (6 x PWM and 2 timer/counters)
2 low-power sleep counters
2 UARTs, one with flow control
SPI-bus
leader and follower
Variable instruction width for high coding efficiency
Multi-stage instruction pipeline
Data EEPROM with guaranteed 100k write operations
Supply voltage monitor with 8 programmable thresholds
Battery voltage and temperature sensors
6-input 10-bit ADC
Analog comparator
Digital monitor for ADC
Watchdog timer and POR
Low-power modes controller
Up to 18 Digital IO (DIO) and 2 digital outputs pins

Specifiche

Category	RF and WirelessRF Transceiver Modules and Modems	Series	-
Programmable	Not Verified	RF Family/Standard	802.15.4
Protocol	Zigbee®	Modulation	-
Frequency	2.4GHz	Data Rate	-
Power - Output	8.5dBm	Sensitivity	-96dBm
Serial Interfaces	I²C, SPI, UART	Antenna Type	Integrated, Trace
Utilized IC / Part	-	Memory Size	-
Voltage - Supply	3.6V	Current - Receiving	16.4mA
Current - Transmitting	114mA	Mounting Type	Surface Mount
Operating Temperature	-40°C ~ 85°C	Base Product Number	JN517

Politiche di servizio e altro

Relativi al servizio post-vendita e alla liquidazione

Pagamento

Metodo di pagamento

TT/bonifico bancario

PayPal

Western Union

Grammo dei soldi

Per canali di pagamento alternativi, contattaci a:

[email protected]

Spedizione e imballaggio

metodo di spedizione

Fedex

UPS

DHL

NTN

Imballaggio

AVAQ determina e confeziona tutti i dispositivi in base ai requisiti di protezione contro le scariche elettrostatiche (ESD) e il livello di sensibilità all'umidità (MSL)..