Questo sito web utilizza i cookie. Utilizzando questo sito, acconsenti all'utilizzo dei cookie. Per ulteriori informazioni, dai un'occhiata al nostro politica sulla riservatezza.

Le immagini servono solo come riferimento,

Vedi Specifiche Tecniche

JN5178/001Z +BOM

Wirelessly connect devices using ZigBee and IEEE.protocols for seamless data transfer

Produttore:

NXP Semiconductor
ProduttorePart #:

JN5178/001Z
Scheda dati:

JN5178/001Z Scheda dati (PDF)
Series:

JN517X
Programmable:

Not Verified
Type:

TxRx + MCU
RF Family/Standard:

802.15.4

JN5178/001Z Descrizione generale

The JN5178 device is an ultra-low-power, high-performance wireless microcontroller, optimized as a platform for ZigBee 3.0 applications in Smart Home and Smart Lighting networks. It features an Arm? Cortex?-M3 processor with debug and programmable clock speeds. The JN5178 device has 256 kB of embedded Flash memory as well as 32 kB of RAM and 4 kB of EEPROM. The embedded Flash can support "Over-The-Air" firmware updates. The device also includes a 2.4 GHz "IEEE802.15.4 compliant" transceiver and a comprehensive mix of on-chip analog and digital peripherals.The radio transmit power is configurable up to +10 dBm output. The very-low receive operating current (down to 12.7 mA in normal operation and 0.6 μA in sleep mode) results in long battery life, allowing operation directly from a coin cell. Through its power-saving modes, the device is therefore ideal for battery-powered nodes. The on-chip peripherals include a fail-safe I2C-bus, SPI-bus ports (both leader and follower) and a 6-channel analog-to-digital converter, directly supporting a wide range of applications without the need for extra hardware.For support documentation, please click here.

Specifiche

Category	RF and WirelessRF Transceiver ICs	Series	JN517X
Programmable	Not Verified	Type	TxRx + MCU
RF Family/Standard	802.15.4	Protocol	Zigbee®
Modulation	-	Frequency	2.4GHz ~ 2.485GHz
Data Rate (Max)	-	Power - Output	10dBm
Sensitivity	-96.5dBm	Memory Size	256kB Flash, 4kB EEPROM, 32kB RAM
Serial Interfaces	I²C, PWM, SPI, UART	GPIO	1
Voltage - Supply	2V ~ 3.6V	Current - Receiving	12.7mA ~ 14.8mA
Current - Transmitting	14mA ~ 22.5mA	Operating Temperature	-40°C ~ 125°C
Mounting Type	Surface Mount	Base Product Number	JN517

Politiche di servizio e altro

Relativi al servizio post-vendita e alla liquidazione

Pagamento

Metodo di pagamento

TT/bonifico bancario

PayPal

Western Union

Grammo dei soldi

Per canali di pagamento alternativi, contattaci a:

[email protected]

Spedizione e imballaggio

metodo di spedizione

Fedex

UPS

DHL

NTN

Imballaggio

AVAQ determina e confeziona tutti i dispositivi in base ai requisiti di protezione contro le scariche elettrostatiche (ESD) e il livello di sensibilità all'umidità (MSL)..