Metodo di pagamento
![hsbc](/img/service-policies-hsbc.png)
![paypal](/img/service-policies-paypal.png)
![wu](/img/service-policies-wu.png)
![mg](/img/service-policies-mg.png)
3/5 Transceiver Full RS232 20-PDIP
DIP20Produttore:
ProduttorePart #:
GD75232N
Scheda dati:
Series:
GD
Type:
Transceiver
Protocol:
RS232
Number Of Drivers/Receivers:
3/5
EDA/CAD Modelli:
Compila il breve modulo sottostante e ti forniremo immediatamente il preventivo.
The GD65232 and GD75232 combine three drivers and five receivers from the Texas Instruments trade-standard SN75188 and SN75189 bipolar quadruple drivers and receivers, respectively. The pinout matches the flow-through design of the SN75C185 to decrease the part count, reduce the board space required, and allow easy interconnection of the UART and serial-port connector of an IBM. PC/AT and compatibles. The bipolar circuits and processing of the GD65232 and GD75232 provide a rugged, low-cost solution for this function at the expense of quiescent power and external passive components relative to the SN75C185.
The GD65232 and GD75232 comply with the requirements of the TIA/EIA-232-F and ITU (formerly CCITT) V.28 standards. These standards are for data interchange between a host computer and a peripheral at signaling rates up to 20 kbit/s. The switching speeds of these devices are fast enough to support rates up to 120 kbit/s with lower capacitive loads (shorter cables). Interoperability at the higher signaling rates cannot be expected unless the designer has design control of the cable and the interface circuits at both ends. For interoperability at signaling rates up to 120 kbit/s, use of TIA/EIA-423-B (ITU V.10) and TIA/EIA-422-B (ITU V.11) standards is recommended.
Category | Integrated Circuits (ICs)InterfaceDrivers, Receivers, Transceivers | Series | GD |
Type | Transceiver | Protocol | RS232 |
Number of Drivers/Receivers | 3/5 | Duplex | Full |
Receiver Hysteresis | 500 mV | Data Rate | 120Kbps |
Voltage - Supply | 5V, ±7.5V ~ 15V | Operating Temperature | 0°C ~ 70°C |
Mounting Type | Through Hole | Base Product Number | GD75232 |
Relativi al servizio post-vendita e alla liquidazione
Metodo di pagamento
Per canali di pagamento alternativi, contattaci a:
[email protected]metodo di spedizione
AVAQ determina e confeziona tutti i dispositivi in base ai requisiti di protezione contro le scariche elettrostatiche (ESD) e il livello di sensibilità all'umidità (MSL)..
Prodotto 365 giorni
Qualità garantita
Promettiamo di fornire un servizio di garanzia della qualità di 365 giorni per tutti i nostri prodotti.
Qtà. | Prezzo unitario | Est. Prezzo |
---|---|---|
1+ | - | - |
I prezzi sottostanti sono solo di riferimento.
Tutte le distinte materiali (BOM) possono essere inviate via e-mail a
[email protected],
oppure compila il modulo sottostante per richiedere un preventivo per GD75232N, preventivi garantiti entro
12 ore.