Questo sito web utilizza i cookie. Utilizzando questo sito, acconsenti all'utilizzo dei cookie. Per ulteriori informazioni, dai un'occhiata al nostro politica sulla riservatezza.

Le immagini servono solo come riferimento,

Vedi Specifiche Tecniche

FXL4T245 +BOM

onsemi 4-BIT TRANSLATOR DIRECT

Produttore:

onsemi
ProduttorePart #:

FXL4T245
Scheda dati:

FXL4T245 Scheda dati (PDF)
Packaging:

[ "Reel" ]
Factory Pack Quantity:

3000
EDA/CAD Modelli:

Richiedi modelli CAD gratuiti per FXL4T245

E-mail: [email protected]

Skype: live:.cid.ab6b29428937b76

tel: +852 95804164

FXL4T245 Descrizione generale

The FXL4T245 is a configurable dual-voltage-supply translator designed for bi-directional voltage translation of signals between two voltage levels. The device allows translation between voltages as high as 3.6V to as low as 1.1V. The A Port tracks the V_CCA level, and the B Port tracks the V_CCB level. Both ports are designed to accept supply voltage levels from 1.1V to 3.6V. This allows for bi-directional voltage translation over a variety of voltage levels: 1.2V, 1.5V, 1.8V, 2.5V, and 3.3V.
The device remains in 3-STATE until both V_CCs reach active levels allowing either V_CC to be powered-up first. The device also contains power down control circuits that place the device in 3-STATE if either V_CC is removed.
The Transmit/Receive (T/R#) input determines the direction of data flow through the device. The OE# input, when HIGH, disables both the A and B Ports by placing them in 3-STATE condition. The FXL4T245 is designed so that the control pins (T/R# and OE#) are supplied by V_CCA.

Caratteristiche principali

Bi-directional interface between any 2 levels from 1.1V to 3.6V
Fully configurable, inputs track V_CC level
Non-preferential power-up sequencing; either V_CC may be powered-up first
No power-up sequencing required
Outputs remain in 3-STATE until active V_CC level is reached
Outputs switch to 3-STATE if either V_CC is at GND
Power-off protection
Control inputs (T/R#, OE#) levels are referenced to V_CCA voltage
Packaged in 14-terminal DQFN (2.5mm x 3.0mm) package
ESD protection exceeds:
4kV HBM ESD (per JESD22-A114 & Mil Std 883e 3015.7)
8kV HBM I/O to GND ESD (per JESD22-A114 & Mil Std 883e 3015.7)
1kV CDM ESD (per ESD STM 5.3)
200V MM ESD (per JESD22-A115 & ESD STM5.2)

Applicazione

This product is general usage and suitable for many different applications.

Specifiche

Product Category	onsemi	Packaging	[ "Reel" ]
Factory Pack Quantity	3000

Politiche di servizio e altro

Relativi al servizio post-vendita e alla liquidazione

Pagamento

Metodo di pagamento

TT/bonifico bancario

PayPal

Western Union

Grammo dei soldi

Per canali di pagamento alternativi, contattaci a:

[email protected]

Spedizione e imballaggio

metodo di spedizione

Fedex

UPS

DHL

NTN

Imballaggio

AVAQ determina e confeziona tutti i dispositivi in base ai requisiti di protezione contro le scariche elettrostatiche (ESD) e il livello di sensibilità all'umidità (MSL)..