Metodo di pagamento
FT232RL-TUBE +BOM
USB Bridge, USB to UART USB 2.0 UART Interface 28-SSOP
SSOP-28-
Produttore:
FTDI
-
ProduttorePart #:
FT232RL-TUBE
-
Scheda dati:
-
Series:
FT232
-
Product:
USB Converters
-
Type:
Bridge, USB to UART
-
Mounting Style:
SMD/SMT
-
EDA/CAD Modelli:
Invia tutte le distinte materiali a [email protected], oppure compila il modulo sottostante per un preventivo su FT232RL-TUBE. Risposta garantita entro 12hr.
Disponibilità: 7072 PZ
Compila il breve modulo sottostante e ti forniremo immediatamente il preventivo.
FT232RL-TUBE Descrizione generale
The FT232RL-TUBE is a game-changing USB to serial UART interface IC that simplifies the connection between devices and a computer. With its tube packaging, engineers and enthusiasts can easily store and handle this essential component. Its USB full-speed controller and support for various operating systems including Windows, Mac, and Linux, make it a versatile solution for a wide range of applications. From industrial to consumer electronics, the FT232RL-TUBE's small size and ease of use make it a go-to choice for developers and hobbyists seeking a trustworthy and efficient connectivity solution
Caratteristiche principali
- Hardware Features
- Single chip USB to asynchronous serial data transfer interface.
- Entire USB protocol handled on the chip - No USB-specific firmware programming required.
- UART interface support for 7 or 8 data bits, 1 or 2 stop bits and odd / even / mark / space / no parity.
- Fully assisted hardware or X-On / X-Off software handshaking.
- Data transfer rates from 300 baud to 3 Megabaud (RS422 / RS485 and at TTL levels) and 300 baud to 1 Megabaud (RS232).
- 256 byte receive buffer and 128 byte transmit buffer utilising buffer smoothing technology to allow for high data throughput.
- FTDI’s royalty-free VCP and D2XX drivers eliminate the requirement for USB driver development in most cases.
- In-built support for event characters and line break condition.
- New USB FTDIChip-ID™ feature.
- New configurable CBUS I/O pins.
- Auto transmit buffer control for RS485 applications.
- Transmit and receive LED drive signals.
- New 48MHz, 24MHz,12MHz, and 6MHz clock output signal Options for driving external MCU or FPGA.
- FIFO receive and transmit buffers for high data throughput.
- Adjustable receive buffer timeout.
- Synchronous and asynchronous bit bang mode interface options with RD# and WR# strobes.
- New CBUS bit bang mode option.
- Integrated 1024 Bit internal EEPROM for storing USB VID, PID, serial number and product description strings, and CBUS I/O configuration.
- Device supplied preprogrammed with unique USB serial number.
- Support for USB suspend and resume.
- Support for bus powered, self powered, and high power bus powered USB configurations.
- Integrated 3.3V level converter for USB I/O .
- Integrated level converter on UART and CBUS for interfacing to 5V - 1.8V Logic.
- True 5V / 3.3V / 2.8V / 1.8V CMOS drive output and TTL input.
- High I/O pin output drive option.
- Integrated USB resistors.
- Integrated power-on-reset circuit.
- Fully integrated clock - no external crystal, oscillator, or resonator required.
- Fully integrated AVCC supply filtering - No separate AVCC pin and no external R-C filter required.
- UART signal inversion option.
- USB bulk transfer mode.
- 3.3V to 5.25V Single Supply Operation.
- Low operating and USB suspend current.
- Low USB bandwidth consumption.
- UHCI / OHCI / EHCI host controller compatible
- USB 2.0 Full Speed compatible.
- -40°C to 85°C extended operating temperature range.
- Available in compact Pb-free 28 Pin SSOP and QFN-32 packages (both RoHS compliant).
Specifiche
Product Category | USB Interface IC | Series | FT232 |
Product | USB Converters | Type | Bridge, USB to UART |
Mounting Style | SMD/SMT | Standard | USB 2.0 |
Speed | Full Speed | Data Rate | 12 Mb/s |
Supply Voltage - Min | 3.3 V | Supply Voltage - Max | 5.25 V |
Operating Supply Current | 15 mA | Minimum Operating Temperature | - 40 C |
Maximum Operating Temperature | + 85 C | Interface Type | UART, USB |
Moisture Sensitive | Yes | Product Type | USB Interface IC |
Factory Pack Quantity | 47 | Subcategory | Interface ICs |
Tradename | R-CHIP | Unit Weight | 0.025045 oz |
Politiche di servizio e altro
Relativi al servizio post-vendita e alla liquidazione
Per canali di pagamento alternativi, contattaci a:
[email protected]metodo di spedizione
AVAQ determina e confeziona tutti i dispositivi in base ai requisiti di protezione contro le scariche elettrostatiche (ESD) e il livello di sensibilità all'umidità (MSL)..
Prodotto 365 giorni
Qualità garantita
Promettiamo di fornire un servizio di garanzia della qualità di 365 giorni per tutti i nostri prodotti.
In Stock: 7.072
Minimum Order: 1
Qtà. | Prezzo unitario | Est. Prezzo |
---|---|---|
1+ | $7,895 | $7,90 |
10+ | $6,924 | $69,24 |
30+ | $6,329 | $189,87 |
100+ | $5,833 | $583,30 |
I prezzi sottostanti sono solo di riferimento.
prodotti sponsorizzati
Top Sellers
-
CP2102
Silicon Laboratories
Integrate seamlessly into your design with our reliable interface I
-
MAX232
Texas Instruments
This V device features bps data transfer rates and robust ESD protection
-
W5500
Wiznet
With its comprehensive set of protocols and interfaces, this IC streamlines network development and deploymen
-
TJA1050
Nxp
Robust and reliable high-speed communication solution for demanding application
-
RTL2832U
Realtek
High-performance demodulation for DVB-T signals, plug-and-play via US