Questo sito web utilizza i cookie. Utilizzando questo sito, acconsenti all'utilizzo dei cookie. Per ulteriori informazioni, dai un'occhiata al nostro politica sulla riservatezza.

Le immagini servono solo come riferimento,

Vedi Specifiche Tecniche

FT232HL-REEL +BOM

USB Bus Controller, CMOS, PQFP48, Lead Free, LQFP-48

Produttore:

FTDI
ProduttorePart #:

FT232HL-REEL
Scheda dati:

FT232HL-REEL Scheda dati (PDF)
Series:

FT232
Product:

USB Controllers
Type:

Bridge, USB to UART/FIFO
Mounting Style:

SMD/SMT
EDA/CAD Modelli:

Richiedi modelli CAD gratuiti per FT232HL-REEL

E-mail: [email protected]

Skype: live:.cid.ab6b29428937b76

tel: +852 95804164

FT232HL-REEL Descrizione generale

USB TO UART/FIFO BRIDGE, -40 TO 85DEG C; Bridge Type:USB to UART, FIFO; Supply Voltage Min:1.62V; Supply Voltage Max:1.98V; IC Case / Package:LQFP; No. of Pins:48Pins; Operating Temperature Min:-40°C; Operating Temperature Max:85°C RoHS Compliant: Yes

Caratteristiche principali

Single channel USB to serial / parallel ports with a variety of configurations.
Entire USB protocol handled on the chip. No USB specific firmware programming required. USB 2.0 Hi-Speed (480Mbits/Second) and Full Speed (12Mbits/Second) compatible. Multi-Protocol Synchronous Serial Engine (MPSSE) to simplify synchronous serial protocol (USB to JTAG, I2C, SPI (MASTER) or bit-bang) design. UART transfer data rate up to 12Mbaud. (RS232 Data Rate limited by external level shifter). USB to asynchronous 245 FIFO mode for transfer data rate up to 8 Mbyte/Sec. USB to synchronous 245 parallel FIFO mode for transfers upto 40 Mbytes/Sec Supports a proprietary half duplex FT1248 interface with a configurable width, bidirectional data bus (1, 2, 4 or 8 bits wide). CPU-style FIFO interface mode simplifies CPU interface design. Fast serial interface option. FTDI’s royalty-free Virtual Com Port (VCP) and Direct (D2XX) drivers eliminate the requirement for USB driver development in most cases. Adjustable receive buffer timeout. Option for transmit and receive LED drive signals. Bit-bang Mode interface option with RD# and WR# strobes Highly integrated design includes 5V to 3.3/+1.8V LDO regulator for VCORE, integrated POR function Asynchronous serial UART interface option with full hardware handshaking and modem interface signals. Fully assisted hardware or X-On / X-Off software handshaking. UART Interface supports 7/8 bit data, 1/2 stop bits, and Odd/Even/Mark/Space/No Parity. Auto transmit enable control for RS485 serial applications using the TXDEN pin. Operational mode configuration and USB Description strings configurable in external EEPROM over the USB interface. Configurable I/O drives strength (4, 8, 12 or 16mA) and slew rate. Low operating and USB suspend current. Supports self powered, bus powered and high power bus powered USB configurations. UHCI/OHCI/EHCI host controller compatible. USB Bulk data transfer mode (512 byte packets in Hi-Speed mode). +1.8V (chip core) and +3.3V I/O interfacing (+5V Tolerant). Extended -40°C to 85°C industrial operating temperature range. Compact 48-pin Lead Free LQFP or QFN package Configurable ACBUS I/O pins.

Specifiche

Product Category	USB Interface IC	Series	FT232
Product	USB Controllers	Type	Bridge, USB to UART/FIFO
Mounting Style	SMD/SMT	Standard	USB 2.0
Speed	High Speed (HS), Full Speed (FS)	Data Rate	12 Mb/s
Supply Voltage - Min	1.62 V	Supply Voltage - Max	1.98 V
Operating Supply Current	50 mA	Minimum Operating Temperature	- 40 C
Maximum Operating Temperature	+ 85 C	Interface Type	UART
Moisture Sensitive	Yes	Operating Supply Voltage	1.8 V, 3.3 V
Product Type	USB Interface IC	Factory Pack Quantity	1500
Subcategory	Interface ICs	Tradename	H-CHIP
Unit Weight	0.006409 oz

Politiche di servizio e altro

Relativi al servizio post-vendita e alla liquidazione

Pagamento

Metodo di pagamento

TT/bonifico bancario

PayPal

Western Union

Grammo dei soldi

Per canali di pagamento alternativi, contattaci a:

[email protected]

Spedizione e imballaggio

metodo di spedizione

Fedex

UPS

DHL

NTN

Imballaggio

AVAQ determina e confeziona tutti i dispositivi in base ai requisiti di protezione contro le scariche elettrostatiche (ESD) e il livello di sensibilità all'umidità (MSL)..