Metodo di pagamento
FPF2702MPX +BOM
Current Limit SW 1-IN 1-OUT 2.8V to 36V 2A 8-Pin MLP EP T/R
MLP EP-
Produttore:
-
ProduttorePart #:
FPF2702MPX
-
Scheda dati:
-
Pbfree Code:
Yes
-
Part Life Cycle Code:
Obsolete
-
Reach Compliance Code:
compliant
-
ECCN Code:
EAR99
-
EDA/CAD Modelli:
Disponibilità: 7961 PZ
Compila il breve modulo sottostante e ti forniremo immediatamente il preventivo.
FPF2702MPX Descrizione generale
The AccuPower™ FPF270X series is a family of current-limit load switches that provide full protection to systems and loads from excess current conditions. Minimum current limit is adjustable from 0.4 A to 2.0 A. The FPF270X contains a slew-rate-controlled N-channel MOSFET and slew-rated turn-on to prevent power bus disturbances from being caused by "hot plugging" loads or momentary excess load demands. The input voltage range is 2.8 V to 36 V. Loads can be activated or deactivated with a low-voltage logic-compatible ON pin. Fault conditions can be monitored using the error flag pin and/or the power-good pin. Each member of the FPF270X family serves a category of load-fault response. All devices clamp the load current so that it cannot exceed an externally programmed current level. An over temperature feature provides further device protection in case of excessive levels of power dissipation. FPF2702 is intended to be used with external fault management. Like the FPF2700 and FPF2701, it sets the fault signal pin LOW when it activates current clamping. This device is intended for applications where external fault management coordinates the overload response with the FPF2702. The FPF270X is available in a space-saving Pb and Halogen free, 8-lead MLP 3x3mm and SO8 packages.
Specifiche
Source Content uid | FPF2702MPX | Pbfree Code | Yes |
Part Life Cycle Code | Obsolete | Reach Compliance Code | compliant |
ECCN Code | EAR99 | HTS Code | 8542.39.00.01 |
Factory Lead Time | 51 Weeks | Built-in Protections | OVER CURRENT; THERMAL; UNDER VOLTAGE |
Driver Number of Bits | 1 | Interface IC Type | BUFFER OR INVERTER BASED PERIPHERAL DRIVER |
JESD-30 Code | S-PDSO-N8 | JESD-609 Code | e4 |
Length | 3 mm | Moisture Sensitivity Level | 1 |
Number of Functions | 1 | Number of Terminals | 8 |
Operating Temperature-Max | 85 °C | Operating Temperature-Min | -40 °C |
Output Current Flow Direction | SOURCE | Output Peak Current Limit-Nom | 0.4 A |
Peak Reflow Temperature (Cel) | 260 | Qualification Status | Not Qualified |
Seated Height-Max | 0.8 mm | Supply Voltage-Max | 36 V |
Supply Voltage-Min | 2.8 V | Supply Voltage-Nom | 12 V |
Surface Mount | YES | Temperature Grade | INDUSTRIAL |
Terminal Finish | NICKEL PALLADIUM GOLD SILVER | Terminal Form | NO LEAD |
Terminal Pitch | 0.65 mm | Terminal Position | DUAL |
Time@Peak Reflow Temperature-Max (s) | 30 | Width | 3 mm |
Politiche di servizio e altro
Relativi al servizio post-vendita e alla liquidazione
Per canali di pagamento alternativi, contattaci a:
[email protected]metodo di spedizione
AVAQ determina e confeziona tutti i dispositivi in base ai requisiti di protezione contro le scariche elettrostatiche (ESD) e il livello di sensibilità all'umidità (MSL)..
Prodotto 365 giorni
Qualità garantita
Promettiamo di fornire un servizio di garanzia della qualità di 365 giorni per tutti i nostri prodotti.
In Stock: 7.961
Minimum Order: 1
Qtà. | Prezzo unitario | Est. Prezzo |
---|---|---|
1+ | - | - |
I prezzi sottostanti sono solo di riferimento.
Tutte le distinte materiali (BOM) possono essere inviate via e-mail a [email protected], oppure compila il modulo sottostante per effettuare un preventivo per FPF2702MPX, preventivi garantiti entro 12 ore.