Questo sito web utilizza i cookie. Utilizzando questo sito, acconsenti all'utilizzo dei cookie. Per ulteriori informazioni, dai un'occhiata al nostro politica sulla riservatezza.

Le immagini servono solo come riferimento,

Vedi Specifiche Tecniche

EPF8452ATC100-4 +BOM

Application: Electronic design and prototyping

Produttore:

Intel
ProduttorePart #:

EPF8452ATC100-4
Scheda dati:

EPF8452ATC100-4 Scheda dati (PDF)
Programmabe:

Not Verified
Number Of LABs/CLBs:

42
Number Of Logic Elements/Cells:

336
Number Of I/O:

68
EDA/CAD Modelli:

Richiedi modelli CAD gratuiti per EPF8452ATC100-4

EPF8452ATC100-4 Descrizione generale

The EPF8452ATC100-4 is a high-performance field-programmable gate array (FPGA) produced by Altera. Part of the MAX II family of FPGAs, it is tailored for demanding applications that require advanced performance and flexibility. With a package type of 100-pin thin quad flat pack (TQFP), this FPGA boasts a total of 4520 logic elements, making it suitable for complex tasks. Operating at a speed grade of 4, it can achieve a maximum internal frequency of 330 MHz, ensuring rapid processing and responsiveness

Caratteristiche principali

Low-cost, high-density, register-rich CMOS programmable logic
device (PLD) family (see Table 1)
– 2,500 to 16,000 usable gates
– 282 to 1,500 registers
System-level features
– In-circuit reconfigurability (ICR) via external configuration
devices or intelligent controller
– Fully compliant with the peripheral component interconnect
Special Interest Group (PCI SIG) PCI Local Bus Specification,
Revision 2.2 for 5.0-V operation
– Built-in Joint Test Action Group (JTAG) boundary-scan test (BST)
circuitry compliant with IEEE Std. 1149.1-1990 on selected devices
– MultiVoltTM I/O interface enabling device core to run at 5.0 V,
while I/O pins are compatible with 5.0-V and 3.3-V logic levels
– Low power consumption (typical specification is 0.5 mA or less in
standby mode)
Flexible interconnect
– FastTrack® Interconnect continuous routing structure for fast,
predictable interconnect delays
– Dedicated carry chain that implements arithmetic functions such
as fast adders, counters, and comparators (automatically used by
software tools and megafunctions)
– Dedicated cascade chain that implements high-speed, high-fan-in
logic functions (automatically used by software tools and
megafunctions)
– Tri-state emulation that implements internal tri-state nets
Powerful I/O pins
Programmable output slew-rate control reduces switching noise
Peripheral register for fast setup and clock-to-output delay
Fabricated on an advanced SRAM process
Available in a variety of packages with 84 to 304 pins (see Table 2)
Software design support and automatic place-and-route provided by
the Altera® MAX+PLUS® II development system for Windows-based
PCs, as well as Sun SPARCstation, HP 9000 Series 700/800, and IBM
RISC System/6000 workstations
Additional design entry and simulation support provided by EDIF
2 0 0 and 3 0 0 netlist files, library of parameterized modules (LPM),
Verilog HDL, VHDL, and other interfaces to popular EDA tools from
manufacturers such as Cadence, Exemplar Logic, Mentor Graphics,
OrCAD, Synopsys, Synplicity, and Veribest

Specifiche

Programmabe	Not Verified	Number of LABs/CLBs	42
Number of Logic Elements/Cells	336	Total RAM Bits	-
Number of I/O	68	Number of Gates	4000
Voltage - Supply	4.75V ~ 5.25V	Mounting Type	Surface Mount
Operating Temperature	0°C ~ 70°C (TA)

Politiche di servizio e altro

Relativi al servizio post-vendita e alla liquidazione

Pagamento

Metodo di pagamento

TT/bonifico bancario

PayPal

Western Union

Grammo dei soldi

Per canali di pagamento alternativi, contattaci a:

[email protected]

Spedizione e imballaggio

metodo di spedizione

Fedex

UPS

DHL

NTN

Imballaggio

AVAQ determina e confeziona tutti i dispositivi in base ai requisiti di protezione contro le scariche elettrostatiche (ESD) e il livello di sensibilità all'umidità (MSL)..